hydraulic power tong api xq28 us patent for sale

Model XQ28/2.6 hydraulic power tong is an improved type of XYQ1.8 which is used to make up and break out sucker rod thread in Well Service. This product has the following features:

A. The structure is compact, concise and light. Master tong is driven by a low-speed large torque hydraulic motor that matches with a manual control valve. The backup tong is just like a spanner. The total weight is approximately equal to XYQ1.8.

B. The operating is briefness and convenience with high efficiency. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong, turning the reset knob incorrect direction then can make up and break out sucker rod by operating manual control valve. Two speed, snapping at low speed, spinning at high speed.

ZQ series of drilling pipe power tongs are a kind of perfect wellhead tools that can be extensively used in the fields of drilling or workover offshore and inland and upper unloading the pipe column screw thread during the workover job. The tongs have

the roles of enhancing the working efficiency, safety and labor-saving. These series of tongs are open-mouth type, can freely escape the pipe columns with very good maneuverability. The torque tongs and cupboard button tongs are

assembled as a whole, where upper unloading buttons replace the catheads, hanging tongs and spinning ropes. The power tongs conform to the SY/T5074 standards and API Spec 7K specifications.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

A two-speed Hydra-Shift® motor coupled with a two-speed gear train provides (4) torque levels and (4) RPM speeds. Easily shift the hydraulic motor in low speed to high speed without stopping the tong or tublar rotation, saving rig time.

Used on corrosion resistant alloys (CRA) and fiberglass tubulars where reduced markings on the tubular is desired. Eckel"s Coated True Grit® Dies utilize Tungsten Carbide grit which provides many more points of contact on the surface of the tubular than our Pyramid Fine Tooth dies.

A patented door locking system (US Patent 6,279,426) for Eckel tongs that allows for latchless locking of the tong door. The tong door swings easily open and closed and locks when torque

is applied to the tong. When safety is important this locking mechanism combined with our safety door interlock provides unparalleled safety while speeding up the turn around time between connections. The Radial Door Lock is patented protected in the following countries: Canada, Germany, Norway, United Kingdom, and the United States.

The field proven Tri-Grip® Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. The Tri-Grip®Backup provides exceptional gripping capabilities with either Eckel True Grit® dies or Pyramid Fine Tooth dies. The hydraulic backup is suspended at an adjustable level below the power tong by means of three hanger legs and allowing the backup to remain stationary while the power tong moves vertically to compensate for thread travel of the connection.

Eckel offers several models of torque control systems that are used to monitor the torque turn values when making up tubular connections (Tubing, Casing, & Drill Pipe). Any flaws in the make-up process will be readily shown in a graph.

MOT"s Hydraulic Power Tongs are used for running or pulling tubular strings during well repair, workover, snubbing, drilling and casing operations to extract oil and gas from wells. MOT’s

Our TEDA Style power tongs apply correct, uniform torque, reducing costly rod and tubing failures, delivering ample power to make up and break out rods and tubulars from 5/8” rod to 5-1/2” casing. Our series of XQ power tongs come with Bi-Directional jaw systems that save time and enhance safety, and go from make to break with the flip of a knob.

Tongs offer a variety of upgrades from our standard XQ series of TEDA Style models featuring Eaton hydraulic motors for extra torque and reliability, two or three spool directional control valves for more efficient hydraulic operations, and modified structures for higher strength, durability and adaptability to specific job requirements.

Are available from 5-1/2” to 20” pipe and are able to handle both API Standard and PREMIUM (Proprietary Steel Grade) casing connections which require higher torque. Available in a variety of models with hydraulic back-up tongs optional: “KMA", “KHT”, “TQ", “KJD”, “KD” and SE 16-25 with torques ranging from 15,000 ft-lbs up to 55,000 ft-lbs.

API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong API 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tongAPI 7K 2 3/8 2 7/8 3 1/2 Tubing Hydraulic power tong

Magnum Manufacturing is a team of experienced casing running engineers and industry-leading professionals tired of working with existing substandard equipment. We have spent decades developing equipment to the highest industry standards, and we personally have been using the equipment we’ve developed. After 30+ years of partnering with a leading American TRS company to ensure optimal performance, we are prepared to stake our reputation on Performance, Longevity, & Safety.

The company owns powerful research & development capability, advanced production equipment and scientific testing means, besides ISO9001 Certificate, API Certificate of Authority to Use Official Monogram and ISO10012 measuring guarantee confirmation, it has also been awarded the China patent"Jiangsu excellent Enterprises 100","AAA Qualification and Credit Enterprise","Honouring Contacts and Keeping Promise" in Jiangsu Province. The company engaged in scientific research, development, production and management of petroleum drilling and production equipment.

The main products of our company are Model l .8 sucker rod power tong , 2.6 sucker rod power tong ,3B power tong ,3C power tong ,3E power tong ,3X power tong ,6B power tong ,6X power tong , l2A power tong ,12X power tong ,20X power tong of XQ series open-head power tong (tubing tong) ,and Model 8,8A of XQB series closed-head power tong (tubing tong), Model 25,75,100,125,145 of ZQ series drill pipe power tong (drill pipe tong),Model 9 5/8,13 3/8 ,20,KJD9625 casing tong,550-H,950-H spinmaster, YNJ200/l5 hydraulic make-up & break-out unit, sucker rod elevator, tubing elevator, and cement tools such as model SJ series stage cementer, cement plug set ,and kelly bushings ,and mud pump spare parts and which are produced in accordance with API Spec 7K, 8A, and correlation standards. The products contain more than 20 national patents. The products are popular in domestic oilfields as well as in countries of North America, Southeast Asia and West Europe. The product have also won the gold prize of /99 China patent fair in Washington, USA.

World Petroleum Supply, Inc stocks a wide selection of West International Consulting, Inc. Power Tongs & Hydraulic Power Units to suit every application. All power tongs products of which are API Certified.