lippert power tong jack free sample

Let’s face it, manually cranking your camper’s tongue jack every time you go to set up your campsite or tear it down, can take a lot of time. Not to mention, it can be quite the unwanted workout. If you’re tired of breaking a sweat lifting and lowering your 5th wheel RV or travel trailer, then you need the Power Tongue Jack from Lippert™. This electric jack lets you take a break from manually lowering and raising your a-frame trailer with just a push of a button. Extend. Retract. And move on with your adventures. It’s that easy.

Engineered with 30 AMPs of power, the Power Tongue Jack is fully equipped with four integrated LED lights that conveniently shine on the coupler for night-time operation, quiet, yet efficient, helical-cut gears, a textured casing protecting the jack from scratches and damage, 3,500 lb. lift capacity, and a durable, powder-coated finish. From top to bottom this jack was built to make your life easier on the open road.

POWER TONGUE JACK FEATURES:EASY INSTALLATION —Complete with all necessary hardware and pins, installation for the Power Tongue Jack is fast and simple, so you can get to lowering and raising your equipment in no time

TIME-SAVING —Say goodbye to cranking your manual jack. With the push of a button, you can raise or lower your a-frame trailer in a fraction of the time, without breaking a sweat

POWERFULLY ENGINEERED —Built to do heavy lifting, the Power Tongue Jack has a 3,500 lb. lift capacity, helical-cut gears, 30 AMPs of power, and a 12V motor — all designed to get the job done, quietly and efficiently, so you don"t have to

BUILT TOUGH —Made from heavy-gauge, steel construction, a durable, textured housing that prevents chips and cracks, and a black powder-coat finish — this jack was designed to operate, day after day

Delivering on power, versatility, and durability like never before, the Power Stance™ Tongue Jack by Lippert™ was engineered with all of the same great features as our original power tongue jack — and then some. This trailer jack can be operated with an industry-first 2-way to 7-way plug powering system. The Power Swap Auxiliary Cord™ can be added to any Power Stance — allowing you to easily connect your jack directly to your tow vehicle without worrying about draining your RV’s power.

The Power Stance comes standard with an integrated safety chain storage ring. This means no more dragging chains across the ground. All you have to do is clip or hang your chains on the ring, and they stay clean, off the ground — and most importantly, out of your way. It’s also equipped with a convenient storage inlet for you to tuck away your trailer’s 7-way connector — keeping it safely protected from damage.

Equipped with LED lights that shine down on your trailer’s coupler for nighttime operation, from top to bottom the Power Stance is built to add convenience to your on-road adventures — including an emergency manual crank option that allows you to raise and lower your jack, even in the event of a power failure.

POWERFUL SOLUTION —Equipped with 2-way to 7-way powering system, so campers can use the Power Swap Auxiliary Cord to connect their jack to their tow vehicle, instead of draining power from their RV or manually cranking to lift and lower their RV

VERSATILITY —Every jack comes with an integrated safety chain storage ring — allowing you to clip your chains out of your way instead of dragging them or wrapping them around your jack. Plus, a storage inlet designed to stow your trailer’s 7-way connector

STYLISHLY DURABLE —This jack comes with a sleek, durable plastic head-cover to keep it protected from the elements. The cover’s one-piece design is aesthetically pleasing and helps keep water from infiltrating the jack’s motor and gears

USER-FRIENDLY OPERATION —Built-in LED lights shine directly down on your trailer coupler — making it easy to see and operate your Power Stance jack at night. Plus, these lights are designed to illuminate for 5 minutes, then turn off if not in use

THOUGHTFUL DESIGN —In the event of a power failure, this jack is equipped with an emergency manual crank option, so you never have to worry about being stranded

Add the Power Swap Auxiliary Cord™ to your Lippert™ Power Stance™ tongue jack to equip it with a more convenient, less hassle power source. The Power Swap is a 2-way to 7-way plug that connects your jack right to the power in your tow vehicle. No more draining the battery in your RV. And no more worrying whether or not there’s an available power supply.

Simply connect the 2-way plug to your Power Stance and the 7-way plug to your tow vehicle’s adapter. This allows you to use the power in your vehicle to lower or lift your trailer. Perfect for trailers without a power source to operate your electric jack.

The Power Stance comes loaded with all the same great features as our Lippert Power Tongue Jack, and then some. Equipped with four LED lights that shine directly on your trailer’s coupler for nighttime operation this jack was designed for durability, versatility and convenience from head to toe. Including a safety chain storage ring to keep your RV trailer’s chains off the ground and out of the way — plus, a storage inlet designed specifically for your trailer’s 7-way connector. Every detail of this jack was thoughtfully designed with campers in mind.

INDUSTRY-FIRST —The Power Swap Auxiliary Cord provides a 2-way to 7-way plug that connects your Power Stance tongue jack directly to the power in your tow vehicle for a more convenient way to operate your tongue jack

HASSLE-FREE —Say goodbye to unreliable power sources and draining your RV’s battery. With the Power Swap Auxiliary Cord you can lift and lower your trailer with a more convenient power supply

EASY UPGRADE —The Power Swap Auxiliary Cord was specifically designed to be used with the Power Stance. It’s the easiest way to upgrade the versatility and efficiency of your power tongue jack

THOUGHTFUL DESIGN —In the event of a power failure, the Power Stance jack is equipped with an emergency manual crank option, so you never have to worry about being stranded

Add the Power Swap Auxiliary Cord™ to your Lippert™ Power Stance™ tongue jack to equip it with a more convenient, less hassle power source. The Power Swap is a 2-way to 7-way plug that connects your jack right to the power in your tow vehicle. No more draining the battery in your RV. And no more worrying whether or not there’s an available power supply.

Simply connect the 2-way plug to your Power Stance and the 7-way plug to your tow vehicle’s adapter. This allows you to use the power in your vehicle to lower or lift your trailer. Perfect for trailers without a power source to operate your electric jack.

The Power Stance comes loaded with all the same great features as our Lippert Power Tongue Jack, and then some. Equipped with four LED lights that shine directly on your trailer’s coupler for nighttime operation this jack was designed for durability, versatility and convenience from head to toe. Including a safety chain storage ring to keep your RV trailer’s chains off the ground and out of the way — plus, a storage inlet designed specifically for your trailer’s 7-way connector. Every detail of this jack was thoughtfully designed with campers in mind.

INDUSTRY-FIRST —The Power Swap Auxiliary Cord provides a 2-way to 7-way plug that connects your Power Stance tongue jack directly to the power in your tow vehicle for a more convenient way to operate your tongue jack

HASSLE-FREE —Say goodbye to unreliable power sources and draining your RV’s battery. With the Power Swap Auxiliary Cord you can lift and lower your trailer with a more convenient power supply

EASY UPGRADE —The Power Swap Auxiliary Cord was specifically designed to be used with the Power Stance. It’s the easiest way to upgrade the versatility and efficiency of your power tongue jack

THOUGHTFUL DESIGN —In the event of a power failure, the Power Stance jack is equipped with an emergency manual crank option, so you never have to worry about being stranded

The bestelectric trailer jacksare designed to make life easier for you and your passengers. With the press of a button,electric trailer jackswill quickly lift or lower your trailer to easily hook and unhook yourtravel trailerfrom atowing vehicle. By connecting the trailer jack to an installed battery in your trailer, you’ll be on the road in no time.

Our team has researched, rated, and reviewed the bestelectric trailer jackson the market so you don’t have to deal with manually turning your trailer jack.

Unless you can lift your trailer by hand, you will need to purchase a trailer jack in order to get your trailer on the hitch. There are two types of trailer jacks: manual trailer jacks and electric trailer jacks.

You can expect most manual trailer jacks to cost around $50 to $150, while electric trailer jacks typically cost around $200 to $300, though some cost as much as $1,000. In any case, an electric trailer jack is an expensive upgrade. Also consider that an electric trailer jack may require more maintenance than a manual jack and the installation process is more complicated.

That said, once an electric trailer jack is installed, it allows you to couple and decouple a trailer with ease. For those who struggle to operate a manual jack, or who frequently swap the trailers on their hitches, an electric trailer jack is a must-have accessory.

With the press of a button, theLippertPower Jackwill raise and lower yourA-frame trailerin no time. This product comes with all the necessary hardware to make installing and using this jack fast and simple.

A specialLippert jack featureis the integratedLED lightsused to illuminate the ball andcouplerfor easy use at night. This jack also has a 3,500.0-poundlift capacityand 30.0AMPsof power when connected to a12.0-voltbattery.

The Lipperty isa good jack to consider if you are looking for an electric jack that will easily hook or unhook your trailer hitch in no time. This jack is well-priced compared to similar jacks.

TheLippertjack has mostly positive reviews from customers, highlighting its durability and easy installation. Reviewers specifically share how fast the jack lifts and lowers their trailer orcamperin comparison to other jacks customers had owned.

A handful of reviewers suggest purchasing a waterproof cover to prevent any damage to the jack or powerconnectors, to ensure the product does not get damaged due to weather.

TheUriah Products Trailer Jackis not only a durable jack but has many safety features to ensure this product will be long-lasting and safe to use. It is equipped with both awater-resistantmotor and plastic housing to prevent any water damage caused by poor weather.

With a lift range of 9.0 to 31.5 inches, this product is easy to raise and lower your trailer to almost any height. The oversizedFoot Pad, an added safety feature, providesstabilityand is adjustable to best stabilize the jack on the ground while in use.

The UriahElectric Trailer Jackis ideal if you are looking for an electric jack that has great safety and durability features. Though it may not be the fastest jack on the market, thestabilityandweather-resistantfeatures of this jack are an added bonus.

Some customers have issues with the power connection to the electric jack. A handful also share that the speed of the electric jack can be inconsistent and slower than other jacks.

TheWeizePower Tongue Jackis both sturdy and incredibly easy to install and use. Made with heavy-gauge steel construction and a black powder-coat finish, this jack is both rust- andcorrosion-resistant, designed to prevent chips or cracks in the product.

Thiselectric tongue jack, similar to most, includes a manualhand crankif you lose power or experience any battery complications. The Weize also comes with a front-facingLED lightdirected at a downward angle for easy visibility and usage in low-light situations.

Thiselectric trailer jackis ideal if you are looking for a simple-to-use jack that is reliable and hasweather-resistantfeatures with little concern for longevity.

Some customers shared that thepower cordcould be a foot longer to better reach the battery in their trailer orcamper, but using a compatible extension cord solved the issue.

TheBeetroElectric Trailer Jackis apower tongue jackwith a 4,000.0-lb.lifting capacityand a 22.0-in. lifting range. These features alone make this one of the most powerful jacks we’ve ever seen. This product is equipped with a 50.0-in.power cordand is attachable to any12.0-V DCbattery for easy use.

On top of all these factors that make thisjack footsimple to operate, there are six mounting holes to fitA-frame trailers, RVs,fifth wheels, boats, andcampers.

Thiselectric trailer jackis great if you are looking for a product that will specifically hold yourA-frame trailer. As an added bonus, this jack has rust-resistant and weatherproofing features that ensure the product will be long-lasting.

Despite the built-in circuit breaker, a handful of customers had issues with the electric jack failing while trying to raise or lower their trailer. This resulted in having to use thehand crankmanually, defeating the purpose of an electric jack.

TheBastionPower Tongue Jackcan be used fortowingRVs, motor homes,campers, trailers, boats,fifth wheels, A-frames, and many othertravel trailersor vehicles. Not only is this jack versatile in use, but there are also many safety features including an auto-reset breaker that will override and reset the jack within a few seconds.

With amanual crank handleand installation kit included, this product should be easy to install with a fail-safe handle in case your trailer battery loses power. The product has been UV tested for up to 500 hours, making the Bastion a reliable jack for most weather conditions.

The Bastion jack would be ideal if you are looking for a lower-cost electric jack that can fit a variety of vehicles andtravel trailers, while still having safety features and weatherproofing.

The Bastion tongue jack has few reviews on Amazon – however, the majority of customers are very satisfied with the product. Although some complained of the low speed, many found it to hold up great and be a durable product at a lower cost.

Before purchasing a newelectric trailer jack, there are many factors that can affect the product you choose. Safety features, compatibility, andweight capacityshould be taken into account before making this purchase.

This is generally not a low-cost product, so making sure you’ve checked all your options before purchasing will give you peace of mind that you selected the bestelectric trailer jack.

When moving or lifting anyheavy-dutyequipment, safety is a must. Someelectric trailer jacksour team reviewed have more safety features than others. Our team emphasizes the importance of choosing safe products to review, and while some have more features than others, all products are designed to be used safely.

TheUriah Products Trailer JackandBeetroElectric Trailer Jackhave defining safety features that are worth considering. From circuit-breaker protection to an oversizedfoot padfor the beststability, these products are ideal for your safety and others.

The compatibility of a trailer jack is important to consider so you know it will be used effectively without any issues orstabilityconcerns. TheBastionPower Tongue Jackis a great choice for a versatile product. Compatible withtravel trailers, boats, and many more, the Bastion is a smart option and reference for a compatibleelectric tongue jack.

A trailer jack should be able to hold seven to ten percent of your fully loaded trailer, or whatever object or vehicle you aretowing. If you aretowinga 5,000.0-lb.travel trailer, using 10 percent, for example, you need a trailer jack of at least a 500.0-lb.weight capacity.

Ensuring you are choosing the right electric jack for your trailer’s weight is important before making your purchase. All theelectric trailer jackswe chose vary in weight load capacity. Knowing the weight of your trailer will make it certain that you know which product is most suitable for your trailer andtowingneeds.

Trailer jacks elevate your trailer to a certain point allowing the trailer to then be hooked or unhooked to and from anytowingtruck. Theelectric trailer jackmakes this process easier, with thepush of a buttonyou can easily raise or lower the jack to a specific height for hooking or unhooking your trailer.

The requiredweight capacityof a tongue jack can be determined by calculating the tongue weight of your trailer. The general rule is seven to ten percent of the weight of your fully loaded trailer. If you have a 5,000.0-lb. trailer, using 10 percent as an example, you would need a trailer jack with a capacity of at least 500.0 lbs.

A trailer jack has the capability to raise and lower the tongue of the trailer. Unless you have the strength to lift your trailer by hand, you will need a trailer jack.

The best way to power anelectric trailer jackis to install or connect the jack to a dedicated battery on your trailer. Specifically, a12-Velectric power that is compatible with the majority ofelectric trailer jacksand will get the jack up and running quickly.

To select the five bestelectric trailer jacksin this review, our team searched retailers such as Amazon and Advance Auto Parts for top products, looking at factors like customer ratings, prices, superlatives, and Prime shipping eligibility.

Obviously, trailer jacks allow you to raise and lower the front of a trailer. This lets you not only level the trailer from front to back, but it also allows you to connect and disconnect it from your tow vehicle.

An electric trailer jack makes raising and lowering the front of a heavier trailer a breeze. So, a manual trailer jack might be all you need for a lightweight trailer.

Trailer jacks are pretty simple devices, yet there are a few things to know about them before you make a purchase. Should you go with an electric or manual trailer jack? What size rating should you get?

All of the below reviewed electric tongue jacks fit a 2 1/4" mounting hole, which is the standard size for A-frame trailer tongues, including those found on RV travel trailers.

It still works like a charm with plenty of lifting capacity. Kelly"s back is VERY grateful- the turning mechanism of her old manual jack almost threw her back out every time she used it.

Both the Husky Brute and Super Brute tongue jacks use the ball screw drive mechanism, feature smart stop technology, and they share the same other great features that make a Husky a Husky.

Two remote controls come with the Husky Super Brute HSB5000 5,000 pound heavy duty electric trailer jack version. These allow you to extend and retract the jack without having to be at the jack itself.

The ball screw drive mechanism in the Husky Brute and Super Brute power jacks offer some advantages over what Bulldog uses, and Husky offers a higher capacity jack as well as an available remote control.

If you don"t mind putting a little work into raising or lowering your trailer, and your back doesn"t give you issues, then one of the following manual trailer jacks should work for you.

There aren"t huge differences between the different available options. Therefore, we picked a light-duty and a heavy-duty manual jack option to give you an idea of what is out there.

The side handle position means that you can crank away without hitting something mounted close to the jack, such as propane tanks or the trailer structure itself.

Alternately, you may purchase a jack foot separately (not expensive at all) so that you can use this manual jack without having to deal with carrying a chunk of wood around.

Installation is fairly straightforward with 2 options. Use it as a bolt-on trailer jack (mounting hardware not included). Or, you can weld it onto your trailer"s tongue.

You can purchase a jack foot separately (not expensive at all) so that you can use this manual jack without having to deal with carrying a chunk of wood around.

There should be a hole at the bottom of the inner jack tube (the part that goes up and down to raise and lower your trailer) that the included pin can run through in order to attach the foot to the jack.

It has a unique feature in that it will automatically drop down when you are lowering your jack and it will automatically retract into a stowed position as you are running your jack up.

Both lengths have a maximum lift weight of 4,000 pounds and are suitable for trailers with tongue weights up to 1,600 pounds (4" extension version) or 1,400 pounds (6" extension version).

Which size extension do you need? The 4" or the 6"? If there is less than 10" from the bottom of your trailer"s tongue jack to the ground (with the jack fully retracted), go with the 4" extension. If there is more than 10" here, go with the 6" extension.

The Towing Organizer comes in either plastic or aluminum (anodized clear or black) and fits trailer jacks with a diameter of 2 1/4 inches (the standard sized jack diameter.

I asked an old, established RV dealer owner what the best power jack brand was. He said they all have issues. Any electrical device exposed to the elements has potential for corrosion, weather damage, etc.

Search the forum. An alternative is a minor modification, using a 1/2" bolt with hex head, matching socket and a cordless drill. The drill is normally out of the weather and useful for other duties, does the same power jack task, & this mod costs about $2 tops. Some simple drilling (machining) of the bolt is required. I learned of this mod at the Mississippi Rendezvous a few weeks ago, returned the other day from that extended road trip & got my 1/2" bolt yesterday, and intend to do this mod soon. Kudos to Bill from Missouri for turning me on to this.

Search the forum. Others have detailed it, I believe. If you"re a push button kind of fellow, buy the power jack. I agree, they can be useful. If you"re a hacker, try the mod. It is completely & quickly reversible. I can"t detail describe this mod, as I haven"t accomplished it...yet. Others have described it in detail, here, or somewhere. It"s a simple mod, I"m told, as it"s been described to me.

Same, thing. My jack sort of stopped and was dead. However, the little LED light was still functional, so I *knew* power was getting through. I took the entire thing apart looking for bad connections, corrosion, etc. Nothing.

However, after replacement, everything worked as expected. So, I swapped the old fuse back in and got the same behavior -- LED light would work, but the jack would not respond. Put the new fuse back in, and it works.

Upgrading your camper to an electric jack will save your time and energy every time you camp. Electric jacks can bring down the effort needed for this job to a dead zero.

But when you set out to buy an electric tongue jack, you will realize that for the same rated weight capacity, you can get products from anywhere between $150 and $600. That is a huge range for something that does the same basic job – lifting your trailer tongue.

To start with, it’s a powerful jack that can lift 3,500lbs of weight to a height of 18 inches. While it does not support a drop leg, it comes with mounting hardware and a manual crank override.

In terms of durability, this jack uses heavy gauge steel and powder coating. Still, the impressive aspect is the textured finish on the electrical part, which makes it scratch resistant and, therefore, waterproof.

It’s a powerful jack that can draw up to 30 amps to run on a 12V battery. It’s also got four headlights in the front for evening and morning departures.

It is very durable. Built to last for a long time, it has features that other jacks miss – such as a textured finish on the electrical head which protects it from the weather.

Lippert offers a Power swap cord separately, which you can use to connect this jack directly to your tow instead of the RV. If your RV is low on power, it’s a great optional accessory.

If you have a lighter trailer and are looking for a jack that won’t hurt the pocket but will still be durable, we suggest the CURT 28204. It is rated for 2,000 pounds and can lift your trailer tongue 15 inches (and more if you put in a drop leg).

The jack is very durable. It has a corrosion-resistant zinc plating and is powder-coated on the outside. You can bolt it onto the trailer tongue or even weld it for a more permanent option. It doesn’t take more than a few minutes to do either. It’s got a sidewind handle that is great for easy rotation.

The first thing that you notice about the Husky 82022 Super Brute is the 3X price tag compared to other jacks here. But this jack offers a few features that make it worth the while.

At the heart of this jack is an innovative ball screw design. It reduces friction while going up or down and saves the motor from having to put in extra amperage. It also reduces wear and tear, thus making it last longer. It also means that this jack can lift 5,000 lbs using a 25 amp connection.

It also means that this jack can slide down at an impressive 6 inches per 60 seconds, which means it can cover its max lift of 18 inches in just 3 minutes.

This jack comes with everything you can want – mounting screws to jack foot to a 6-inch drop leg, directional lighting on front and sides, a weatherproof cover, a bracket to store your cable plug, and even a remote control.

It is not very easy to ground the jack. You might have to sand off some of the paint on the panel and use the metal washers that you get with the jack.

At a rated capacity of 3500 lbs, the RAM EJ-3520-BBX is a super-durable electric jack that operates with the push of a single button. With the included drop leg and jack foot, this jack gives you an incredible 25.5 inches of lift, making it an excellent option for muddy and softer ground.

It’s got everything you need from an electric jack – strong front headlights, corrosion-free inner tubing, and powder-coated exterior casing, which means it will last for several years happily mounted on your trailer.

This is one of the most solid electric jacks we could find. The external tube is powder-coated steel which means there won’t be any chips or scratches. The inner one is electroplated, so you can set it down on the muddy ground and wipe it off without rust or corrosion.

With the drop leg included, this jack gives you 25.5 (18 + 7.5 drop leg) inches of lift. Coupled with the jack foot (included), this is the best jack for lifting your trailer out of muddy and soft soil.

It’s got big and bright front LED lights, unlike most other electrical jacks that have those small ones. You can see the hitch clearly as you lift the jack, even at night.

The jack doesn’t come with any niceties like textured casing, a cover for the jack’s head, or mounting screws. For the price, you might have expected to see these things included.

The Bulldog Fulton is the only ASABE compliant jack in our lineup, which means that you can use this jack not just for trailers but also for agricultural and commercial purposes – yes, it is that strong!

Rated to lift 5,000lbs by up to 15 inches, the Bulldog Fulton is a no-nonsense manual sidewind jack with an alloy steel construction which you can buy at a great price. Don’t expect any frills from this jack, though – it doesn’t ship with either a jack foot or a drop leg.

The alloy steel construction is superior to normal stainless steel and powder-coated jacks. Alloy steel has enhanced corrosion resistance and better strength.

The crank handle is in front of the jack, not the side. While you can reverse the handle if needed, some configurations need a front handle, and if your hitch works that way, this jack is great for you.

The number of turns you need to lift a weight is the same as if you had a lower capacity jack – so it’s not a huge time saver if you are purchasing it for that purpose.

Your trailer jack should be rated to lift at least 10% of the trailer weight, including the weight of the camper stuff that you will carry on the trailer.

For example, if the trailer weighs 7,500 lbs, and the weight of everything you are carrying is another 1,000 lbs, you need to get a trailer jack rated for a lift capacity of about 850 lbs. To be on the safer side, get one that is rated for at least 1,000 lbs.

If you are not sure of the trailer weight, you can always talk to the manufacturer or research it online, but do not buy a trailer jack without doing this little calculation.

The problem with electric jacks is that water going into them can damage the internal circuitry. What you need is a jack whose exterior is corrosion-resistant water.

Apart from that, these jacks are often installed permanently on the trailer tongue, so they are exposed to the external environment. There can be moisture in the air, dirt, and dust on the road, and road salt can accumulate over time.

You need a solid exterior with Zinc electroplating that will keep the jack rust-free for many years. It should be made with solid high gauge steel, and a powder-coated finish will make it even better.

Bolting is a lot easier and takes less time as well. Most DIYers should be able to bolt an electric jack onto the tongue in a few minutes with the right tools. So unless you have prior welding experience, we suggest you bolt on the jack.

Drop Legs have two advantages: they reduce the effort you need to crank the jack and give you additional flexibility in places where the ground is too high or too low.

All you need is to pull out the pin, lower the leg, and put it back in. It will add a couple of inches to the jack if the trailer is far away from the ground and reduce the time you need to crank the jack.

Our experience tells us that despite the best and most durable construction, the electrical circuitry in these jacks can go bad on the road. A manual override is one feature you should never compromise on. Even if you don’t have power, you can always crank the handle and get your trailer ready in no time.

They protect your jack from dirt at the bottom, but it also gives a wider base to the jack so that it can distribute the load that it is carrying. It also adds a couple of inches to the jack.

You can get the weight of your trailer tongue by asking the manufacturer. Another rule of thumb is to simply take 15% of the trailer’s weight. If your trailer weighs about 10,000 lbs, the trailer tongue would measure 1,500 lbs.

With this rough calculation, you can buy a trailer jack that can support at least this much weight, but we would suggest you err on the side of caution and buy a jack rated for a higher weight.

We have already told you how to ballpark the weight of the tongue, but you need to find out the weight of the tow car online or from its manufacturer. Nearly 50% of the weight would rest on the rear tires, which the jack would have to bear.

Tongue jacks can be either manual or electric, the only difference being the way you pull up the jack. In a manual jack, you need to crank it up using a lever, whereas, with an electric jack, you just need to push a button. There are three main types of Electric jacks:

A-Frame jacks are named after A-frame trailers for which these jacks are most widely used. You can affix these jacks to the trailer, and most of them are not meant for lifting more than 2,000 to 5,000 lbs. As we mentioned earlier, always look for a jack foot when buying an A-frame jack.

Even electric A-frame jacks will have a manual overriding crank. If the crank is on the side of the jack, it is called a sidewind jack, and on the top, it is called a top wind jack. The Bulldog Fulton we have reviewed above is a sidewind model.

When buying an A-frame jack, look for ones with a drop leg mechanism because it makes the height adjustable for different surfaces and saves you time if you have to crank it manually.

If you use a class A motorhome or a fifth wheeler, an A-frame jack would simply not cut it. Secondly, if you are using a weight-distribution hitch, you need a jack that can handle more capacity than normal A-frame jacks.

This is where heavy-duty electric jacks come in. These babies are designed to withstand anywhere from 5,000 to 12,000 lbs. For example, the Husky 82022 Super Brute we just saw can manage 5,000 lbs without a hiccup.

Since these jacks are heavy, you need to put up brackets on the sides of your trailer’s frame to permanently attach them. In most cases, if a heavy-duty jack has a drop leg, it would be a double tube to make sure that it remains sturdy under a lot of weight.

Letting your jack hang straight down when moving means that your trailer tongue has a much lower ground clearance. If you hit a bump somewhere, the jack will get damaged.

Side-mounted jacks avoid this problem by swiveling to the side when they are not in use. While that’s a great way to avoid damage, it also means that the jack is not as sturdy as a heavy-duty option. So these jacks are mostly used for smaller trailers.

Drop legs are the sturdiest, and you can get these with weight capacity ratings as high as 8,000 to 12,000 lbs. The pin-based jacks will give you a capacity of 800 to 1,5000 lbs, whereas the pipe-based ones are rated between 2,000 to 7,000 lbs.

Easy to use: Once you have done the initial installation, the jack just needs a button press every time you want to hitch or unhitch. It will save you lots of precious time and leave one less thing to do.

Auto Leveling: Many of the electric models even come with auto-leveling. When you press the button on the remote, the jack will automatically stop going down when it is firmly on the ground. Others can preset the depth, so if you camp on the same site every year, you don’t have to make the height measurements again and again.

Backup Crank:Electric trailer jacks are intelligently designed with a manual cranking mechanism. If the wiring goes loose or you don’t have access to power, you can default to the manual method.

We judged the electrical jacks on many parameters, and each had its strengths and weaknesses. But among all the options, we felt that the Lippert 285318 3500LB Power Tongue Jack Black is the best compromise between features, value, and ease of use.