lippert power tong jack made in china

Let’s face it, manually cranking your camper’s tongue jack every time you go to set up your campsite or tear it down, can take a lot of time. Not to mention, it can be quite the unwanted workout. If you’re tired of breaking a sweat lifting and lowering your 5th wheel RV or travel trailer, then you need the Power Tongue Jack from Lippert™. This electric jack lets you take a break from manually lowering and raising your a-frame trailer with just a push of a button. Extend. Retract. And move on with your adventures. It’s that easy.

Engineered with 30 AMPs of power, the Power Tongue Jack is fully equipped with four integrated LED lights that conveniently shine on the coupler for night-time operation, quiet, yet efficient, helical-cut gears, a textured casing protecting the jack from scratches and damage, 3,500 lb. lift capacity, and a durable, powder-coated finish. From top to bottom this jack was built to make your life easier on the open road.

POWER TONGUE JACK FEATURES:EASY INSTALLATION —Complete with all necessary hardware and pins, installation for the Power Tongue Jack is fast and simple, so you can get to lowering and raising your equipment in no time

TIME-SAVING —Say goodbye to cranking your manual jack. With the push of a button, you can raise or lower your a-frame trailer in a fraction of the time, without breaking a sweat

POWERFULLY ENGINEERED —Built to do heavy lifting, the Power Tongue Jack has a 3,500 lb. lift capacity, helical-cut gears, 30 AMPs of power, and a 12V motor — all designed to get the job done, quietly and efficiently, so you don"t have to

BUILT TOUGH —Made from heavy-gauge, steel construction, a durable, textured housing that prevents chips and cracks, and a black powder-coat finish — this jack was designed to operate, day after day

Elkhart, Ind. — Lippert Components, Inc. (LCI®) introduces its new Power Stance™ Tongue Jack as a first-in-class “game changer” in the power tongue jack market.

The Power Stance Tongue Jack emerges as a robust jack that allows RVers to lift and lower trailers at the push of a button. One of its most remarkable attributes is that it can also be paired and operated with a 2-way to 7-way plug powering system. The Power Swap Auxiliary Cord™ (sold separately) connects the Power Stance directly to a tow vehicle’s 7-way adaptor without draining an RV’s battery and gives the jack immediate power when there is insufficient power; or, in the case of most cargo and utility trailers, no battery at all. The jack also comes equipped with a manual crank handle in case of an unexpected power failure.

The Power Stance delivers all the great benefits of the standard LCI power tongue jack but comes fully loaded with additional features that put it ahead of the competition. Capitalizing on power, versatility, and convenience, it offers some incredible new features never before offered on an LCI tongue jack. An integrated storage ring allows for convenient storage for safety chains when not in use, and a 7-way adaptor storage inlet underneath the jack hood keeps the adaptor clean and dry when not in use. Other features include built-in LED lights for ease of use at night and helical-cut gears that decrease noise and friction while improving overall performance, neither of which are typically found on other products in the industry.

“Nobody else on the market offers a tongue jack that supplies the exclusive features of the Power Stance 3500,” said Mark Boessler, Senior VP of Aftermarket Sales. “Those features combined with our expertise in the power jack sector have ultimately been our driving forces for developing innovative, industry-leading tongue jacks over the years.”

The Power Stance comes equipped with an enhanced rocker switch for improved durability, an emergency crank-through socket, and a number of other distinctive features. It also has a 3,500-pound lift capacity.

Boessler continued, “The versatility of the Power Stance really separates it from the rest. This power jack solves everyday problems that retail customers have fought from the beginning – with the ability to plug it into a truck when a battery is dead on the RV being a huge advantage. We are thrilled to have a patent pending on this revolutionary new Tongue Jack and take the everyday power jack to a whole new level of unique user experiences.”

The Power Stance Tongue Jack is now available to RV and Utility Trailer OEMs along with a retail packaged aftermarket version for dealers and wholesale distributers. Call your LCI Sales Representative for additional information.

Delivering on power, versatility, and durability like never before, the Power Stance™ Tongue Jack by Lippert™ was engineered with all of the same great features as our original power tongue jack — and then some. This trailer jack can be operated with an industry-first 2-way to 7-way plug powering system. The Power Swap Auxiliary Cord™ can be added to any Power Stance — allowing you to easily connect your jack directly to your tow vehicle without worrying about draining your RV’s power.

The Power Stance comes standard with an integrated safety chain storage ring. This means no more dragging chains across the ground. All you have to do is clip or hang your chains on the ring, and they stay clean, off the ground — and most importantly, out of your way. It’s also equipped with a convenient storage inlet for you to tuck away your trailer’s 7-way connector — keeping it safely protected from damage.

Equipped with LED lights that shine down on your trailer’s coupler for nighttime operation, from top to bottom the Power Stance is built to add convenience to your on-road adventures — including an emergency manual crank option that allows you to raise and lower your jack, even in the event of a power failure.

POWERFUL SOLUTION —Equipped with 2-way to 7-way powering system, so campers can use the Power Swap Auxiliary Cord to connect their jack to their tow vehicle, instead of draining power from their RV or manually cranking to lift and lower their RV

VERSATILITY —Every jack comes with an integrated safety chain storage ring — allowing you to clip your chains out of your way instead of dragging them or wrapping them around your jack. Plus, a storage inlet designed to stow your trailer’s 7-way connector

STYLISHLY DURABLE —This jack comes with a sleek, durable plastic head-cover to keep it protected from the elements. The cover’s one-piece design is aesthetically pleasing and helps keep water from infiltrating the jack’s motor and gears

USER-FRIENDLY OPERATION —Built-in LED lights shine directly down on your trailer coupler — making it easy to see and operate your Power Stance jack at night. Plus, these lights are designed to illuminate for 5 minutes, then turn off if not in use

THOUGHTFUL DESIGN —In the event of a power failure, this jack is equipped with an emergency manual crank option, so you never have to worry about being stranded

We"re professional hydraulic sucker rod tong manufacturers in China, providing customized products made in China with competitive price. If you are going to wholesale bulk hydraulic sucker rod tong in stock, welcome to get quotation from our factory.

KHT5500 hydraulic power tongs is the open power tongs which is applicable to make up or break out 23/8"-31/2"drill pipes, 23/8"-41/2"tubing and 41/2"-51/2" casing during oil field workover operation.

XQ89/4.5 hydraulic power tong is a special machine used in oil field workover operation to unload tubing thread.Heavy-duty workover power tongs with a maximum pipe diameter of 4 1/2 "tubing, with a maximum torque of over 5 KN.m, suitable for various complex conditions workover operation....

We"re professional hydraulic tubing tong manufacturers in China, providing customized products made in China with competitive price. If you are going to wholesale bulk hydraulic tubing tong in stock, welcome to get quotation from our factory.

Model XQ28/2.6 hydraulic power tong is an improved type of XYQ1.8 which is used to make up and break out sucker rod thread in Well Service. This product has the following features:

A. The structure is compact, concise and light. Master tong is driven by a low-speed large torque hydraulic motor that matches with a manual control valve. The backup tong is just like a spanner. The total weight is approximately equal to XYQ1.8.

B. The operating is briefness and convenience with high efficiency. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong, turning the reset knob incorrect direction then can make up and break out sucker rod by operating manual control valve. Two speed, snapping at low speed, spinning at high speed.