power tong assy 3500-6.5k back up assembly 4 quotation

Our power tongs are built to last. With 1 motor options for the 6 1/4” hydraulic power tong, you crew can reach rated torque at 2500 psi. Which means, the tools can reach their rated torque dependably on ever single joint, every day.

With an investment like this, you don’t want one malfunctioning part to be the reason why your equipment isn’t performing. That’s why we build our tongs to be serviceable, high in quality. By using an ISO 9001:2015 quality system, we maintain a close eye on our products.

With an investment like this, you don’t want one malfunctioning part to be the reason why your equipment isn’t performing. That’s why we build our tongs to be serviceable, high in quality. By using an ISO 9001:2015 quality system, we maintain a close eye on our products.

The KT13625 casing tong can handle tubulars as small as 3-1/2″ and as large as 13-5/8″ in diameter. Wraparound jaw and die technology for the two tong jaws is available. Tong can be mounted on either a CLINCHER® or a FARR hydraulic backup. Available with McCoy’s patented WinCatt® data acquisition and torque control system for the make-up of tubular connections.

The KET K-25 Tubing Tong has a wide range from 1.050 thru 2 7/8”, and is lightweight with a wraparound design providing approximately 300 deg. die contact. This prevents crushing or cutting of thin wall tubing.

The tong can be used by hand or with a rope block and cat line, when making-up or breaking-out tubing. They are made of high alloy steel, heat-treated for strength and wear, and then tested. The KET K-25 light-weight tubing tong has a 2,000 ft.-lb maximum torque rating. All tongs are pull-tested and complete documentation is available with each tong.