power tong drilling made in china

ZQ203-100 hydraulic power tongis the ideal handing tools for oil drilling, which is widely applied to make up and break out pipes for offshore drilling and land drilling and workover operation. This type of drill power tongs are characterized by safety, laboursaving operation and high efficiency. They are designed and manufactured according to API Spec 7k.

XQ140 micro-marking and no-marking hydraulic power tongs is a special equipment and open power tongs which is applicable to make up or break out 41/2"-51/2" casing during oil field work over operation. Master and back tong device adopts jaw plate type multi-point clamping mechanism.Can choose contour coated rig dies or pyramid tooth , to ensure the column minimum damage, and can improve the pipe thread connection quality, reduce due to improper work over pipe accident etc..

1. The tongs head is the open structure which is quick and convenient for entering and retreating working position. The integral tong head has good hardness and rigidity.

2. Master tong is roller climbing two jaw plate structure，can install arc tooth die ，the contact surface is more larger and clamp no deformation, The assembly and disassembly is very convenient. The optimum tangent-diameter ratio design ensures reliable clamping and easy slope retreating.The back tong is the three-jaw-plate structure pushed by hydraulic cylinder. The structure is simple and the clamping is reliable; The minimum damage to the tubular column can be ensured, and the main body of the pipe string can be clamped.

6. Master and back tong adopt integral frame structure，back tong is floating connection，The master and back tong adjustable distance, reduce the damage of pipe string shackle;

ZQ series Drill pipe tong is applied for making-up and breaking-out in offshore and onshore drilling operations and work over operations. Open-throat design of the ZQ series allows the tongs to escape from drilling pipe freely with high mobility. The tong is a combination of spinning tong and torque tong. It substitutes cat head, manual tong and rotary rope in making-up and breaking-out. Using this drill pipe tong could be safe, save labor and increase drilling efficiency.

Within those famous China oil and gas power tong manufacturers, GAOTON is a professional such supplier, producer and provider, welcome to wholesale petroleum and oilfield API power tong from our factory.

2. Widely applied in making-up and breading-out in drilling well and repairing well on offshore and land, open-throat design of the ZQ series allows the tongs to escaping from drilling pipe freely with high mobility.

Jiangsu Xinxiang share Co., Ltd was founded in 1994, its predecessor was established in 1955, it‘s located in high-tech industrial concentration zone of Nantong City, Jiangsu Province; near to a new developing international deep-water port Yangkou Port which commitment to ship 200,000 tons goods; world famous modern city Shanghai is only 2.5 hours away from it by car; company registered capital is 60,000,000 RMB, the total assets is 119.85 million RMB, it covers an area of 160,000 square meters and currently over 500 employees. Jiangsu Xinxiang Share Co., Ltd is "self-import and export enterprise", "private technology enterprises in Jiangsu Province", "high-tech enterprises in Jiangsu Province", it is top ten companies of the first national large and medium-sized industrial enterprises in independent innovation capacity of the industry; it accessed to API7, 7K, 8A, 8C, and has the right to use the logo, and also passed the ISO9001:2000 quality system certification in the earlier stage within the same industry.

Type Q2 3/8~10 3/4-48 C Manual Tong is an essential tool in oil drilling operation to fasten or remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch steps.

Type Q2 3/8~7-22 LF Manual Tong is used for making breaking out the screws of drill tools and casing in drilling and well servicing operation. The handling size of this type tong can be adjusted by changing latch lug jaws and handling shoulders.

Type Q4~17-135 SDD Manual Tong is used for making up or breaking out the screws of drill tools and casing joint or coupling. It can be adjusted by changing latch lug jaws and handling shoulders.

FYPE Rigid Machinery is one of the leading China manufacturers and suppliers in oil and gas industry. Our company now brings you high quality and competitive price oilfield manual tools drilling power tong, pipe, casing, tubing tong, hydraulic power tong for sale, which is widely used in oilfield. And quick delivery is also offered, please be free to contact our factory.

Hydraulic Tubing Power Tong API 7K Hydraulic Tubing Power Tong with closed head and open head is used for make up and break out quickly in well service operation. The hydraulic tubing power tong is equipped with hydraulic backup tong and use inner curved cam to clamp. It is as per API 7K specification with oil pipe...

Hydraulic Casing Power Tongs TQ series of casing tongs are widely used for making-up or breaking-out of casings or pipes. The casing tong features high-efficiency, safety, reliability, labor-saving, and can ensure connection quality. Tong head is designed as open and is fitted with two jaws which can ensure reliable...

Manual Tong Manual tong is an essential tool in oil drilling operation to fasten or remove the screws of drill pipe and casing joint or coupling. The handling size of manual tong I can be adjusted by changing latch lug jaws and latch steps. Details • Manual tong is as per API7K standard • Manual tong is an essential...

Hydraulic Casing Power Tongs TQ series of casing tongs are widely used for making-up or breaking-out of casings or pipes. The casing tong features high-efficiency, safety, reliability, labor-saving, and can ensure connection quality. Tong head is designed as open and is fitted with two jaws which can ensure reliable...

Hydraulic Drill Pipe Power Tong After a quench and temper heat treat, the tool joints are cut into box (female) and pin (male) threads. Tool joints are commonly 120 ksi SMYS, rather than the 135 ksi of the tube. They generally are stiffer than the tube, increasing the likelihood of fatigue failure at the junction. The...

Hydraulic Drill Pipe Tong ZQ drill pipe power tong is ideal tool for oil & gas drilling, widely applied for makeup and breakout in offshore and onshore drilling operations and workover operations. Open head design of the ZQ series allows the tongs to disengage from drill string with high mobility. The tong is a...

It is actually a good way to boost our products and solutions and repair. Our mission should be to produce imaginative products and solutions to clients using a fantastic working experience for Tubing Power Tong , Casing Power Tong , Hydraulic Tubing Power Tongs , fax or telephone.

"Our firm sticks to the basic principle of ""Quality is the life of your company, and status will be the soul of it"" for Tubing Power Tong , Casing Power Tong , Hydraulic Tubing Power Tongs , Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.

Model XQ28/2.6 hydraulic power tong is an improved type of XYQ1.8 which is used to make up and break out sucker rod thread in Well Service. This product has the following features:

A. The structure is compact, concise and light. Master tong is driven by a low-speed large torque hydraulic motor that matches with a manual control valve. The backup tong is just like a spanner. The total weight is approximately equal to XYQ1.8.

B. The operating is briefness and convenience with high efficiency. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong, turning the reset knob incorrect direction then can make up and break out sucker rod by operating manual control valve. Two speed, snapping at low speed, spinning at high speed.

The API 7K wellhead manual Extended Casing Tongs are designed and manufactured according to API Spec 7k Specification. Manual Tongs/Elevator Links/Elevator" which is a useful tool applied ton, make up and break out drill pipes, coupling hoop of the drill pipe, joint, casings, casing hoops etc. When raise drill tool up and fall it down. Changing lug jaws and handling shoulders or hole can adjust the handling size of the tongs. According to the requirements of the usage different torque"s tongs can be chosen.

Hydraulic power tong is a workover tool that utilizes the power of the drilling rig to remove the workover tool. The advantages are obvious and easy to use.

Drilling process in the operation of the largest workers, the most heavy workload is on, unloading pipe fittings and drill thread, in the past has been with a pipe clamp or chain clamp, not only labor-intensive, and dangerous. Hydraulic power clamp is the use of oil rig power operation of the mechanical, unloading deduction tool, can greatly reduce the labor intensity of the workers to avoid or reduce the occurrence of injury accidents. At the same time, hydraulic power tongs to strengthen the pipe, drill wire twist torque, reduce the pipe, drilling tool trip accident occurred. The working principle of the hydraulic power clamp is to pass the power of the drilling rig to the hydraulic power clamp hydraulic motor by the stroke reducer, and then by two or one deceleration, the jaw opening gear rotation, resulting in two high and low speed, Pipe tool (drill) rotation. When the opening gear rotates, the plate frame does not rotate under the braking action of the brake hammer, so that there is a relative movement between the opening gear and the palmar plate. In this way, the two rollers of the palmar plate will climb on the slope plate and force the clamp on the hips board to move toward the center of the pipe (drill) until it is clenched with the tool and then with the opening gear Together drive the pipe (drill) to rotate.

SKT series dual-purpose power tongs is applicable to tripping operation and running-in casing operation in the drilling activities in petroleum and mining. It is a new power tongs dependently developed by ourselves according to the requirements from oilfield customers. The power tong integrates the function of drill pipe power tong and casing power tong. It can meet the requirements under the operation of frequent tripping or connecting single pipe. In addition, it can be used to run in the casing with small diameter. During the conversion between the two operations, it is not necessary to replace the equipment. It can increase the wellhead operation efficiency and reduce the labor intensity.

Low stress hydraulic power tong is applied for unloading 2 3/8"-4 1/2 tubing and 4 1/2"-5 1/2"casing pipe in marine oil filed and well service operation. It"s an open-throat designed power tong. It"s an improvement basing on absorbing the advantaged product skill of the world, with changing the special clamp head, which can improve the wearness of tube and no indentation, widely used in the marine oil filed, the high sulfur content field for unloading 9 Cr, 13 Cr, 22 Cr, 25 Cr and other special pipe.

Product features describe as:1. Master tong with double brake structure, greatly increased the braking force ,which can ensure reliable clamping, preventing from slippage .

The machine is a combination of master and backup tong, by operating the multiple valve lever, which can realize the tongs respectively clamping or loosen .

Equipped with extend leading bar and gantry back-up bar, can realize the tongs clamping concurrently,facilitate for the sensor installation, to ensure no twisting while processing .Ensure the torque device performs accurately.

The casing power tong is used to make up and break out for casing operation in oilfields. It has greatly reduced the labor of worker, enhanced connection qualityof thread and diminished accidents. in inappropriate casing operation. Thepower tong has the following features :

Shanghai Hengmao Petroleum Equipment Co., LTD. is a professional international corporation with business line of manufacturing and marketing drilling rig packages components. that also has its own production base. market covers North America, South America Middle-East Asia, Russian, ...

Jiangsu Shenlida Machinery Manufacturing Co., Ltd is one of the material suppliers for CNPC, a Level-One network member unit SINOPEC Equipment Corporation, and an appointed company to provide oil drilling tools production CNPC. professional enterprise engaged in scientific research, ...

he company is a first-class oil drilling & production accessory supply network member unit of CNPC and resource market SINOPEC. The owns powerful research development capability, advanced equipment scientific testing means, besides ISO9001 Certificate, API Certificate Authority to Use ...

Sichuan LD Petroleum Machinery Engineering Co., Ltd., LDP as shortened, is a new enterprise of supplying petroleum equipments and project service , such oil/gas drilling, equipment assembly. Taking high-tech, high-quality, high efficiency, standards returns its basic business ...

Jiangsu Shenlida Machinery Manufacturing Co., Ltd is one of the material suppliers for CNPC, a Level-One network member unit SINOPEC Equipment Corporation, and an appointed company to provide oil drilling tools production CNPC. professional enterprise engaged in scientific research, ...

The owns powerful research development capability, advanced equipment scientific testing means, besides ISO9001 Certificate, API Certificate Authority to ...

SEF Drilling Supplies Co., Ltd. is a reliable supplier for oil drilling equipments with good after-sales services. Our supply range mainly as follows: Solid control equipments(mud pump, sand desilter), Hydraulic power tongs, Downhole/Fishing tools, Wellhead tools(casing head, tubing ...

The products we manufactured include drill pipe tongs, casing tongs, tubing tongs, casing elevators/spiders, swivels, spinners, kelly bushings, air winches, catheads, etc.

Qingdao Leader Int\\\"l Trade & Inustry Co.,Ltd which is the sales office of Laizhou Toppower Petroleum Machinery and Qingdao Green Chemicals Co.,Ltd. Focusing on producing petroleum machinery, chemicals for oil gas, tools, tube, casing tube coupling 15 years, most our products are ...

Jiangsu Shenlida Machinery Manufacturing Co., Ltd is one of the material suppliers for CNPC, a Level-One network member unit SINOPEC Equipment Corporation, and an appointed company to provide oil drilling tools production CNPC. professional enterprise engaged in scientific research, ...

Shandong Laizhou Toppower Petroleum Machinery Co., Ltd specializes in the design, manufacture, sales and according services of hydraulic power tongs. It is a first??lass member supplying network for China Material & Equipment Corporation (CPMEC) Chemical Corporation, director unit ...

Our company is specialized in SL3NB 1300A, 3NB 1300C, F-500, F-800, F-1000, F-1300, F-1600, F-2200 oil drilling mud pump accessories, XQ89 3YC, XQ114 6B, 12YA type hydraulic power tongs, high pressure gate valves, unions, elbows, and other field accessories. We have passed ISO9001:2008 ...

Lai Zhou City Toppower Petroleum Machinery Co., Ltd was built in 1998 and specializes the design, manufacture, sales according services of hydraulic power tongs. It is a ...

Banda Industrial Co., Ltd. Is a Company who is manufacturing oil drilling equipments and one of the net member applied for supplying different Petrol-China, Sinopec CNOOCS. It biggest manufacturers making Power Tong in China. We have developed many kinds Drill Pipe, Casing Oil Tubing. are also ...

Puyang Bao LiTong Petroleum Machinery Co., Ltd. is a limited liability company, manufacturing petroleum machinery accessories. Our company was founded in 2004. Since the establishment, we have developed into strong with fixed assets of 15 million yuan and current more than 800 yuan. We 126 ...

MOT"s Hydraulic Power Tongs are used for running or pulling tubular strings during well repair, workover, snubbing, drilling and casing operations to extract oil and gas from wells. MOT’s

Our TEDA Style power tongs apply correct, uniform torque, reducing costly rod and tubing failures, delivering ample power to make up and break out rods and tubulars from 5/8” rod to 5-1/2” casing. Our series of XQ power tongs come with Bi-Directional jaw systems that save time and enhance safety, and go from make to break with the flip of a knob.

Tongs offer a variety of upgrades from our standard XQ series of TEDA Style models featuring Eaton hydraulic motors for extra torque and reliability, two or three spool directional control valves for more efficient hydraulic operations, and modified structures for higher strength, durability and adaptability to specific job requirements.

Are available from 5-1/2” to 20” pipe and are able to handle both API Standard and PREMIUM (Proprietary Steel Grade) casing connections which require higher torque. Available in a variety of models with hydraulic back-up tongs optional: “KMA", “KHT”, “TQ", “KJD”, “KD” and SE 16-25 with torques ranging from 15,000 ft-lbs up to 55,000 ft-lbs.