power tong rentals in stock

Tongs - Power - BJ sucker rod tong adopts advanced sucker rod or tubing technology and has a compact structure, high reliability and is safe and convenient to operate.

Tongs - Power - New Carter Tool Co. Inc., CT93R Hydraulic powered tubing tong. Complete with 2-3/8" to 3-1/2" jaw assemblies, standard motor, torque gauge assembly, pressure relief valve... More Info

Tongs - Power - New Carter Tool Co., Inc. 5-1/2" CTSX Hydraulic Tubing Tong with heavy case and cover; complete with rigid hanger assy., suspension spring assy., front end control assy.,... More Info

Tongs - Power - New Carter Tool Co. Inc. M-Series power sucker rod tongs, complete with spring hanger assy., gate assy., front end control assy., pressure gauge assy., two 90 degree XH s... More Info

Tongs - Power - New Carter Tool Co., Inc. 4-1/2" RSX Hydraulic Tubing Tong with heavy case and cover; complete with rigid hanger assy., suspension spring assy., front end control assy., ... More Info

Tongs - Power - D D 58-93-2-R Power Tubing Tong is smaller, lighter, and faster than the Foster 5893R. The D D 58-93-2-R Tong is capable of gripping tubulars from 1 5/16" to 7" o.d. More Info

Tongs - Power - FARR TONG MODEL KT 14,000 RINEER GA37 MOTOR, LIFT VALVE ASSEMBLY TORQUE CAPACITY: 50,000 FT/LB SIZE RANGE 4 1.2-14 WITH SAFETY DOOR MOST SIZES OF FARR POWER TONGS ARE IN ... More Info

Tongs - Power - FARR TONG MODEL KT20,000 STAFFA 080 MOTOR, LIFT VALVE ASSEMBLY TORQUE CAPACITY: 50,000 FT/LB SIZE RANGE: 7-20 MOST SIZES OF FARR POWER TONGS ARE IN HOUSTON, IN STOCK READ... More Info

Tongs - Power - FARR MODEL KT5500 HYDRAULIC TUBING TONG C/W 2 SPEED RINEER MOTOR, SIZE RANGE: 2-3/8 IN. - 5-1/2 IN. OD, TORQUE RTED: 18,700 FT/LB C/W SAFETY DOOR MOST SIZES OF FARR POWER... More Info

Tongs - Power - FARR TONG MODEL KT5500 TORQUE CAPACITY: 18000 FT/LB SIZE RANGE: 2 1/16-5 1/2 OD WITH SAFETY DOOR MOST SIZES OF FARR POWER TONGS ARE IN HOUSTON, IN STOCK READY FOR IMMEDIA... More Info

Tongs - Power - FARR TONG MODEL KT5500 5 1/2 IN. TONG TORQUE CAPACITY: 18,000 FT/LB SIZE RANGE: 2 1/16-5 1/2 IN. OD, RINEER 15-13 MOTOR, HIGH TORQUE CLINCHER BACKUP TRIPLE VALVE ASSEMBLY... More Info

Tongs - Power - FARR TONG MODEL KT7585 TORQUE CAPACITY: 25000 FT/LB SIZE RANGE: 2 1/16-8 5/8 OD WITH SAFETY DOOR MOST SIZES OF FARR POWER TONGS ARE IN HOUSTON, IN STOCK READY FOR IMMEDIA... More Info

Tongs - Power - FARR TONG MODEL KT7585 8 5/8 IN. TONG TORQUE CAPACITY 25,000 FT/LB SIZE RANGE: 2 1/16-8 5/8 IN. OD, RINEER 15-15 MOTOR CLINCHER BACKUP, TRIPLE VALVE MOST SIZES OF FARR PO... More Info

Tongs - Power - FARR TONG MODEL LW9625 TORQUE CAPACITY 12000 FT/LB SIZE RANGE 2 7/8 -9 5/8 OD WITH SAFETY DOOR MOST SIZES OF FARR POWER TONGS ARE IN HOUSTON, IN STOCK READY FOR IMMEDIATE... More Info

Tongs - Power - Farrs newest tubular connection tool offers a significantly reduced rig footprint, while continuing to deliver power & uncompromising reliability. The simple design drast... More Info

Tongs - Power - Farr Canada"s newest tubular connection tool offers a significantly reduced rig footprint, while continuing to deliver power and uncompromising reliability. The simple de... More Info

Midland Oil Tools & Services (Latin America) has an inventory that is sure to meet all your Tubular Handling and Down Hole Tool Rental needs, whether your job is on land or offshore. We carry a wide variety of rental tools from hydraulic power tongs & iron roughnecks, elevators and slips to drilling jars, safety valves and I-BOPs, and can custom fit rental packages to meet your specifications. The following is a general listing of rental equipment available.

The 14-100 hydraulic power tong provides 100,000 ft-lb (135,600 N∙m) of torque capacity for running and pulling 7- to 14-in. casing. The tong has a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

Our 14-50 high-torque casing tong provides 50,000 ft-lb (67,790 N∙m) of torque capacity for running and pulling 6 5/8- to 14-in. casing. The tong has a unique gated rotary, a free floating backup, and a hydraulic door interlock.

The 16-25 hydraulic casing tong provides 25,000 ft-lb (33,900 N∙m) of torque capacity for running and pulling 6 5/8- to 16-in. casing. The tong features a unique gated rotary and as many as seven contact points that create a positive grip without damaging the casing.

Rigged up without rig modifications, our 21-300 riser tong is the only tong capable of producing 300,000 ft-lb (406,746 N∙m) of continuous rotational torque in both makeup and breakout mode. The power it achieves in a compact size compares with a conventional 24-in. casing tong.

The 24-50 high-torque casing tong provides 50,000 ft-lb (67,790 N∙m) of torque capacity for running and pulling 10 3/4- to 24-in. casing. The tong features a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

The 30-100 high-torque casing tong provides 100,000 ft-lb (135,600 N∙m) of torque capacity for running and pulling 16- to 30-in. casing. The tong features a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

The 5.5-15 hydraulic tubing tong provides 15,000 ft-lb (20,340 N∙m) of torque capability for makeup and breakout of 1.66- to 5.5-in. tubing and premium or standard connections on corrosion‑resistant alloy tubulars. The tong features an ergonomic, lightweight design with a free-floating hydraulic backup.

The 7.6-30 hydraulic tubing tong provides 30,000 ft-lb (40,670 N∙m) of torque capability for makeup and breakout of 2 3/8- to 7 5/8-in. tubing and premium or standard connections on corrosion‑resistant alloy tubulars. The tong features an ergonomic, lightweight design with a free-floating hydraulic backup.

Our SpeedTork 8.0-70 tong provides torques up to 70,000 ft-lb (94,900 N∙m) and 360° rotation in makeup and breakout operations. It can torque drillpipe connections, drillstring components, drilling tools, packers, couplings, and valves.

We are an authorized Weatherford Distributor, a National Oilwell Varco Distributor, a Clincher Distributor, and Con-Tech Thread Protector Distributor. We also handle reconditioned Power Tongs, Kelly Spinners, Drill Pipe Spinners, Casing Tools and Handling Tools.

We offer practical solutions to these needs and more. Safety, innovation and efficiency are our top priorities. For your convenience, we"ve provided some general information about our equipment and generator rentals.

Power tongs are an essential tool in the drilling industry and are used to make up, break out, apply torque and to grip the tubular components. We are distributors for both Starr Power Tongs and McCoy Global hydraulic power tongs in multiple sizes and torque ranges from high torque to low torque that can be used to run both casing, drill pipe and tubing. When determining which power tong is best for your project, you will want to select the power tong that best fits your tubular size ranges and torque required.

All of our power tongs are available with either the McCoy\\\\\\\\\\\\\\\"s patented WinCatt data acquisition software recently updated to the MTT systems or AllTorque\\\\\\\\\\\\\\\"s computer monitoring system for all the torque and turn control system needed in today\\\\\\\\\\\\\\\"s market for the making of tubular connections. Discover our wide selection of McCoy and Starr casing tongs, tubing tongs and power tongs for sale below!

Here at TIOT, we pride ourselves in only selling high-quality, new and refurbished oilfield tools and equipment. We carry a wide range of oilfield tools for sale and rent, including: elevators, power tongs, power units, tong test stands, casing running tools, casing tools and rotary tools. We repair, recertify and test all of our drill pipe and casing handling equipment in house including inspecting, welding, machining, MPI and load tests. We’re API and ISO Certified from the American Petroleum Institute. Texas International Oilfield Tools stocks and distributes for several manufactures including Alltorque, ConTech, Tesco, McCoy, Starr, and Volant. Explore our wide range of tubular running equipment and pipe handling tools today!

K&S Power Tongs committs to providing quality casing services in a safe, reliable, cost efficient and timely manner. Safety is everyone’s full time job and we are committed to the prevention and elimination of all safety nad health hazards. All operators are specially trained and industry safety certified. Safety is never compromised. Unsafe acts are never tolerated and our employees are held accountable to work safe.

K&S Power Tongs offers coventional and integral power tong services, volant casing running tools, computer torque-turn systems, power thread washing, thread inspection, handling equipment rentals and light oilfield hauling.

torque-turn monitoring was not well adapted for premium connections, since shoulder could occur in a much smaller portion of a turn than the intervals, usually tenths, into which one revolution of a pipe was divided for monitoring turns. There have been indications that reducing the size of turn interval might help in shoulder contact detection, but this would require a substantial increase in the number of lugs or projections formed for turn interval division purposes on the rotary jaw member of the power tongs used in makeup of petroleum tubular goods.

The district court concluded that it could not "substitute Dr. Weiner as the sole inventor on the patent" because "Larry and Darrel [sic] Vincent as named inventors engaged in inequitable conduct before the PTO...." Frank"s Casing, No. 98-0254, slip op. at 50. Nothing in the statute governing a court"s power to correct inventorship, 35 U.S.C. § 256, however, prevents a court from correcting the inventorship of an unenforceable patent. On this record, we agree with the district court that Shaunfield was properly named as an inventor on the patent. However, it is unclear whether the district court held that the Vincents should or should not be named as inventors. Therefore, we remand to the district court for the limited purpose of determining the correct inventorship of the "063 patent if Frank"s wishes to pursue its claim for correction of inventorship.

Cross Appellants, Gulfstream Rental Tools, Inc. and Offshore Energy Services, Inc. (collectively, "Gulfstream") and Connection Technology, Ltd. and Tong Specialty, Inc. (collectively, "Connection") urge that the district court erred in failing to declare this an exceptional case and award attorney fees, as permitted by 35 U.S.C. § 285. Gulfstream and Connection allege that the district court applied the wrong legal standard when determining that this was not an exceptional case by not considering the Vincents" inequitable conduct before the PTO when making its determination. Section 285 is unique to patent law and we have held, as Connection points out, that "inequitable conduct is a substantive patent issue that must be taken into consideration in determinations under 35 U.S.C. § 285." Pharmacia & Upjohn Co. v. Mylan Pharms., Inc., 182 F.3d 1356, 1359, 51 USPQ2d 1466, 1468 (Fed. Cir. 1999). Connection alleges that the district court did not follow the Pharmacia & Upjohn standard. But the district court cited and quoted this exact holding from Pharmacia & Upjohn in its ruling denying the motion for attorney fees. Frank"s Casing, No. 98-0254, slip op. at 4. Thus, the district court did not apply an improper standard or fail to consider the Vincents" inequitable conduct.