power tong truck made in china

We"re professional hydraulic sucker rod tong manufacturers in China, providing customized products made in China with competitive price. If you are going to wholesale bulk hydraulic sucker rod tong in stock, welcome to get quotation from our factory.

XQ140 micro-marking and no-marking hydraulic power tongs is a special equipment and open power tongs which is applicable to make up or break out 41/2"-51/2" casing during oil field work over operation.

We"re professional hydraulic low stress power tong manufacturers in China, providing customized products made in China with competitive price. If you are going to wholesale bulk hydraulic low stress power tong in stock, welcome to get quotation from our factory.

XQ140 micro-marking and no-marking hydraulic power tongs is a special equipment and open power tongs which is applicable to make up or break out 41/2"-51/2" casing during oil...

Model XQ29/1.8 Hydraulic power tong is an opening type power tong, which is used to make up and break out sucker rod’s joint casing thread in well service.

KHT5500 hydraulic power tongs is the open power tongs which is applicable to make up or break out 23/8"-31/2"drill pipes, 23/8"-41/2"tubing and 41/2"-51/2" casing during oil...

Model XQB178/8 Closed-Head power tong is same with 58-93R Closed-Head power tong，it is a safe and accurate unit for the makeup and breakout of tubing and casing 1-5/16" O.D....

Zhongtong Bus Holding Co., Ltd. (SZSE: 000957) (Chinese: 中通客车; pinyin: Zhōngtōng Kèchē) is a Chinese bus manufacturing company based in Liaocheng, Shandong Province.Shenzhen Stock Exchange, and is one of China"s major bus makers.

The company was founded in 1958 as Liaocheng Vehicle Manufacturing and Repair Factory, and began building buses in 1971. After a series of name changes adopted its current name, Zhongtong Bus, in 1998.

Zhongtong Bus" products range from 6-meter light buses to 18-meter high-end luxury buses, including road, urban, light,Hybrid electric buses.trolleybuses, and in 2021 provided a prototype model LCK6126E trolleybus to Mexico City"s

The Zhongtong LCK6600BEV Series is a unlicensed clone of Toyota HiAce (H200) van, with similar body styles and overall vehicle dimensions, but only offered 3 trims in LCK6600BEV lineup. All trims uses hybrid powertrain.

This vehicle is powered by a hybrid powertrain, uses asynchronous motor and 35kWh battery that had 175 km (91 mi) range and can charge up to 1 hours, and uses 2.5 L 4J25TC TDi Turbo Diesel I4, 2.8 L 4JB1 TDi Turbo Diesel I4 and 2.0 L 4Di Diesel I4 diesel engines, in order to charge battery by using the engine to generate power.

The trims are BEV5, BEV4, BEV6 and BEV5PV trims. Zhongtong also offered as LCK6600BEV4 as only offered in normal roof, short-wheelbase variant. Zhongtong also released as a higher roof long-wheelbase variant called LCK6600BEV6 and panel van LCK6600BEV5PV for commercial use. The vehicle was released in China and Taiwan in 2014, along with a LCK6600BEV Series lineup.

Other electric vehicles such as Nissan Leaf, Renault Zoe, Mitsubishi Outlander, Citroën Ami, Mitsubishi i-MiEV, Volkswagen ID.3 and Mazda MX-30, Zhongtong"s hybrid van would not fight sales of electric vehicles because of having producing many vans and bring them to many customers. Zhongtong named World HEV Van because it"s a first mass-produced van that is based on Toyota HiAce H200 van but running in hybrid drive powertrain, thanks to the CHAdeMO charging port located at beside the driver"s door, just like HiAce fuel tank relocated did it by Toyota.

Unlike all electric vehicles, the LCK6600BEV-series is all together with Zhongtong LCK Platform lineup and Zhongtong recently released the low entry bus called Fashion. The Zhongtong Fashion was released in May 2021, the diesel engine and hybrid drivetrain and powertrain variants. Released in Philippine market exclusively for Premium Point-to-Point bus services, the Fashion nameplate is based on the heritage exclusive clothing wording. The model code for Fashion is LCK6125G. The hybrid variant model code for Fashion is LCK6101HEV or Fashion Hybrid. Zhongtong also released a new model called Magnate, released in 2019 and revised version of Elegance released on the same year. The new Zhongtong Magnate"s model code is LCK6128H and revised Elegance with blue strobe light on side window is LCK6118H.

This was the first Zhongtong hybrid van sold only in the China market. The LCK6600BEV5 continued production due to being popular demand of HiAce H200 van clone. The Jinbei Grand Haise are among the various Chinese vans from domestic brands that chose to replicate the Toyota HiAce H200 vans with only minor styling differences. Other brands include government owned manufacturers including Rely, Jinbei, Golden Dragon, King Long, Joylong and Foton.

The company states the combined floor-space of its facilities total around 300,000 square meters.Xinjiang Zhongtong Bus Co Ltd, is responsible for a production line that became operational in 2007.

Zhongtong Bus" major customers include the city of Jinan, Shandong Province.TransJakarta, a Bus Rapid Transit system in Jakarta, capital city of Indonesia.

K&S Power Tongs committs to providing quality casing services in a safe, reliable, cost efficient and timely manner. Safety is everyone’s full time job and we are committed to the prevention and elimination of all safety nad health hazards. All operators are specially trained and industry safety certified. Safety is never compromised. Unsafe acts are never tolerated and our employees are held accountable to work safe.

K&S Power Tongs offers coventional and integral power tong services, volant casing running tools, computer torque-turn systems, power thread washing, thread inspection, handling equipment rentals and light oilfield hauling.

At 4:00 pm on October 31, 2022, the "Win-win between Sinotruk and the World - The First Chinese Truck Company with Monthly Export of Heavy-duty Truck Exceeding 10,000" departure activity was held in Jinan. Liu Qiang, member of the Standing Committee of the CPC Shandong Provincial Committee and secretary of the CPC Jinan Municipal Committee, issued a "departure" instruction for the 10,000th exported heavy-duty truck of Sinotruk in October, and had video interaction with customers in Saudi Arabia and representatives of dealers in Morocco. Yu Haitian, Deputy Secretary of the CPC Jinan Municipal Committee and Mayor, Tan Xuguang, Secretary of the CPC Committee and Chairman of both Shandong Heavy Industry Group and Sinotruk, attended the event and delivered a speech.

From January to October this year, in the face of a precipitous decline in China"s heavy-duty truck industry, Sinotruk’s market share increased by 4 percent, leaping to the first place in China"s industry for the first time, demonstrating the resilience after restructuring. Among the exports, 76,000 heavy commercial vehicles were exported, a year-on-year increase of 54%, accounting for more than 50% of China"s exports of this industry. Especially in October, Sinotruk created a record of 10,000 vehicles exported in a single month.

Since this year, Shandong Heavy Industry Group"s Sinotruk, Shacman, Weichai Group, Shantui, Weichai Lovol, Zhongtong Bus and other enterprises have all made historic breakthroughs in their product exports.

Tan Xuguang said that the export exceeding 10,000 in a single month is a milestone in the export development history of China"s heavy-duty truck industry. This is a specific action for us to earnestly study, publicize and implement the spirit of the 20th National Congress, and stabilize the overall economy and foreign trade exports. We will seize the opportunity of the last two months of this year to make our due contribution to the stable economic development of Shandong and Jinan.

Below in conjunction with the embodiment of accompanying drawing to the utility model tong security protection door frame device, be described further.

Below in conjunction with the embodiment of accompanying drawing to the utility model tong security protection door frame device, be described further.

1. high-grade air clutch, 2. low-grade air clutch, 3. vent valve, 4. threeway air cock, the 5. normally closed top rod valve of two-bit triplet, 6. shuttle valve, 7. three position three-way change valve, the 8. total air bag of drill pipe tong, 9. air gauge.6 liang of air inlet ports of shuttle valve connect respectively top rod valve 5 gas outlets and three position three-way change valve 7 gas outlets, shuttle valve 6 gas outlet connecting tee air cock 4 air inlet ports, the air inlet port position that can switch shuttle valve 6 while handling three position three-way change valve 7 handle, by top rod valve 5 air inlets, are normal operation position to shuttle valve 6, directly from three position three-way change valve 7 air inlets, belong to the emergency power operating position to shuttle valve 6 when top rod valve 5 damages.

In the schematic diagram of Fig. 2, three position three-way change valve 7 is pushed to trouble free service position (being the I position in Fig. 1), shut the drill pipe tong safety protective door, door frame afterbody cam compression top rod valve 5, handle threeway air cock 4 and can connect the gas circuit of the high-grade air clutch 1 of tong or low-grade air clutch 2, realize Power Tong high and low shift handover operation.Pull open doorframe (or doorframe forget shut), top rod valve 5 is obstructed, the total air bag 8 of drill pipe tong is also obstructed to threeway air cock 4 gas circuits, threeway air cock 4 is directly connected top rod valve 5 steam vents, now high-grade or gas low-grade air clutch is directly drained by rapid-release valve, drill pipe tong can"t engage a gear, and binding clip does not turn round, and has realized the out-of-operation requirement of not closing the door.When top rod valve damages, three position three-way change valve 7 can be pushed to emergency position (being the II position in Fig. 1), now the total air bag 8 of tong is switched to the gas circuit of threeway air cock 4 by three position three-way change valve 7 another gas outlets and shuttle valve 6 another air inlet ports, opening and closing of doorframe do not play control action to gas path on-off, this position should not be used for a long time, should repair in time or change top rod valve 5.When drill pipe tong is not worked three position three-way change valve 7 being pushed to fastening position (in Fig. 1 0).

This power tong is used for quick make-up/break-out sucker rod in well service operations. The tong is equipped with hydraulic backup tong and use planetary claws to clamp, which is an product with new technology. It"s an ideal choice in well service operation.

The series of hydraulic tubing power tongs adopt inner cam rolling-up clamping mechanism, with a hydraulic backup tong. It is an ideal tool for makeup or breakout of various of tubings, and small sizes of casings and drill pipes in workover operation. The power tong with extra long rod is available for backup tong to grip tubing body. The power tong also can be equipped with automatic torque control system.

We attempt for excellence and hope to be the top cooperation team and dominator company for personnel, suppliers and customers, realizes price share and continual marketing for Tubing Power Tong Xq140-12A. The company has a good reputation and ensure that industry standards, adhering to the "customer first, service first" business purpose. We stand ready to sincerely cooperate with friends at home and abroad with excellent product quality, friendly service and good reputation, to create a bright future together.

SINOTAI 9 5/8" HYDRAULIC CASING POWER TONG Product Description The casing tong is used to make-up and break-out for casing operation in well service. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation. The power tong has the...

Product Description DSL135 power swivel (hereinafter referred to as “this Product”), of which central pipe rotates under driving force of hydraulic variable motor through gear reduction system, is featured by compact structure and designed weight of 1,200 kg, making it applicable to drilling derrick or work-over...

SINOTAI KHT5500 HYDRAULIC CASING POWER TONG The casing tong is used to make-up and break-out for casing operation in well service. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation. The power tong has the following features as...

SINOTAI Power Swivel Product Description Highlights 1.Power Swivel is the device installing on the derrick of servicing rig, to provide rotating power. 2.Except the use for such workover jobs as casing milling, milling, drilling cement plug and bridge plug and fishing, it is also used for sidetracking drilling,...

Product Description 1.Air operated elevator is conventional elevator to shich power actuation has been added.this feature permits remote opening and closing of the elevator .

SINOTAI 45T Flushby Unit / Rapid Service Rig The flushby unit is a multifunctional equipment mainly used for well flushing and sand washing in thick oil well, and performing quick workover service of shallow/thick oil well. It is the next generation of service machine that outperforms service unit, pump truck and...

Flushby Unit (Rapid Service Unit) The flushby unit is a multifunctional equipment mainly used for well flushing and sand washing in thick oil well, and performing quick workover service of shallow/thick oil well. It is the next generation of service machine that outperforms service unit, pump truck and crane truck...

Product Description Swabbing & Service Rig is the up to date multifunctional oil field equipment that integrates the functions of well servicing rig, swabbing unit and derrick transportation truck. This is another innovation of TS-Sinotai’s multi-function oil field machineries that can handle different operations...

Gaining customer satisfaction is our company"s aim forever. We will make great efforts to develop new and top-quality products, meet your special requirements and provide you with pre-sale, on-sale and after-sale services for Api Casing Tong , API Casing Tong , Hydraulic Casing Tong , high quality and productive support to meet your requirements.

Our commission would be to serve our customers and clientele with very best excellent and aggressive portable digital products for Api Casing Tong , API Casing Tong , Hydraulic Casing Tong , We always adhere to follow the honesty mutual benefit common development after years of development and the tireless efforts of all staff now has perfect export system diversified logistics solutions extensive meet customer shipping air transport international express and logistics services. Elaborate one-stop sourcing platform for our customers!

Some readers may recall that a few months ago I bought a cheap electric mini-truck on Alibaba. I know this because I’ve gotten emails almost daily ever since, asking if my Chinese electric pickup truck has arrived (with some humorously calling it my F-50). Well, now I can finally answer, “Yes!” and share with you exactly what I received.

I originally found the truck while perusing Alibaba in search of a weekly nugget of gold for my Awesomely Weird Alibaba Electric Vehicle of the Weekcolumn.

I found a $2,000 electric truck that looked perfect, except that it was about 2:3 scale. And it only went 25 mph. And only had a 3 kW motor. And you had to pay extra for batteries, shipping, etc.

But glossing over all those hiccups, the truck looked as silly as it did awesome. It was a bit small, but had a lot of charm. So I started talking with the trading company (a little outfit known as ChangLi that also supplies a few importers in the US).

Those upgrades cost me around $1,500 on top of the base price, plus I had to pay an outrageous $2,200 sea shipping rate, but at least my truck was on its way to me now.

The shipping process seemed to take forever. At first all went well, and a couple weeks after paying, my truck was headed to the port. It sat around for another couple weeks until it made it into a container and onto a boat, then six weeks later, the boat arrived in Miami. The only problem was that my truck was no longer on it. No one knew where it went and I spent several days calling the forwarding company, the logistics company, my customs broker, and the Chinese trading company. No one could explain it.

Long story short, the truck finally arrived in Miami, but then got held up in customs for a few more weeks. Once it finally popped out the other end of customs, I paid an additional $500 to some dude I found on Craigslist and he hauled the crated-up truck on a bigger flatbed truck to my parents’ property in Florida that would become the truck’s new home.

The cage it was shipped in was beaten to hell and back, but the truck was miraculously fine. There I unboxed the truck, a process for which I was glad to have charged up my angle grinder in advance. Ultimately the un-crating went decently well with only a few hiccups that I caught on videoalong with my first test rides (of course my dad and wife who were both on hand to watch the show unfold were quick to volunteer to test it out).

I was actually surprised by the fact that the truck was in such good condition after the long journey around the world. I guess preparing myself for a banged up truck helped keep my expectations low, and so I was shocked when the truck arrived nearly dent-free.

It’s not particularly powerful, though the 3 kW motor and 5.4 kW peak controller give it plenty of low-speed oomph for hauling around on my parents’ property. The top speed is just 25 mph (40 km/h) but I rarely hit that speed on uneven ground around the fields anyways – more on that shortly.

The truck itself is surprisingly well-made in some regards. It features full metal body panels, electric windows and doors with key fob for locking, and a full light package with blinkers, head lights, spot lights, tail lights, reverse lights, etc. There’s a backup camera, steel cargo rack and bed rack, high power charger, windshield wiper with washer fluid, and the air conditioning is even quite powerful (as tested in hot, humid Florida).

Unfortunately, these ChangLi cars and trucks are not street legal, nor are pretty much any Chinese-made neighborhood electric vehicles (NEVs) or low speed vehicles (LSVs).

While some people might call the final price a rip-off, consider the alternative. A crappy golf cart with flooded lead acid batteries starts at around $6,000 today. A halfway decent one is $8k. The really nice ones land in the $10-12k range. And even then, all you have is a golf cart. It’s not enclosed, meaning you get rained on. There’s no air conditioning. No wipers. No locking doors. No windows (electric or otherwise). No adjustable bucket seats. No infotainment system. No sun roof. No truck bed with hydraulic dump, etc.

Even though the truck isn’t street legal, that’s fine with me. I didn’t get it for that purpose, and it certainly doesn’t have the safety equipment that would make me comfortable using it in traffic anyway.

Instead, it’s a work truck. I’ll use it (or more likely my parents will use it more than me) as a farm truck on their property. It’s already proven great for that task in the first couple of days I’ve had it. We’ve used it around the land for collecting fallen limbs and debris, for lugging moving boxes and gear around the property, and just for having fun riding around to visit the neighbors!

It sure beats a gas-powered UTV since I never have to fill it up or choke on exhaust. And the same goes for just getting some old beater gas truck – I prefer my fun little EV that can do everything I need around this place.

At this point I’m excited to start modifying the truck. It’s already a great base, though it could use some work. The suspension isn’t great and I’m not sure how much I’ll be able to do there. Some softer springs could be a decent start.

I’m also thinking of putting a small solar panel on the top of the cab. Even a relatively low-power one, such as a 50W panel, could be fairly effective. Assuming 100 wh/mi efficiency for the truck, even just a few miles of use around the property per day could be completely offset by passive solar charging.

There are some other fun mods on my list as well. A bike ramp, a ham radio, maybe an AC inverter so I can charge devices like power tools directly from the truck’s 6 kWh battery. I’m open to suggestions too, if you have any ideas. Meet me in the comments section!

The XQ28/1.8Y Hydraulic Power Tongs feature an open-throat design that provides fast, convenient make-up and break out of threaded sucker-rod connections in well-servicing process.

The master tongs are driven by a slow-spinning hydraulic motor that delivers high torque. Hand-operated directional valves are directly matched up with the motor for motion control. The whole installation is light weight, compact and easy to carry.

The hydraulic backup tongs come together with the master tongs to confirm combination tongs. Via operating the said directional control value, the back up tongs would synchronize with master tongs in tightening up or loosening the sucker rod.

Both the master tongs and backup tongs are of negative camber roll climbing two-way clamping mechanism. To reverse the rotation of these tongs, users only need to turn around the knobs on them.

Tongs dies are also available in different specifications to fit diverse sucker-rods or oil pipes. Additionally, our hydraulic tubing tongs can operate at either one of two speeds for jerking and rotating movements. This allows for improved working efficiency.

Shenzhen Tong"er Le Culture Technology Co Ltd is the leading China children audio books manufacturer that Produces Kids Sound books which contains content planning, editing, des...

Find parts you need to repair or maintain your machines. At Alibaba.com, you can shop for power tong at affordable rates to tackle new obstacles and challenges. In the ever-changing industry, you can find what you need and speak to the supplier directly. Thanks to Alibaba’s collection of wholesale power tong you also get to buy these parts at lower prices, which means you can explore new levels every day more comfortably. From bulldozers to dragline excavators, wheel tractor scrapers to shotcrete machines, any part you need for a heavy-duty mining machinery; you can find it at Alibaba.com.

Looking for purpose-built machine parts? Find them at Alibaba.com. From new components to used parts straight from the manufacturers. Plus, if you need custom-made pieces, you can chat with the supplier, give specifications and wait on delivery. From stone crushers to excavator undercarriage parts, buckets, and even drill bits to get you through the rocks, the power tong from Alibaba offers you the chance to continue operating without a hitch. Whether you are looking to introduce concrete into the rock walls for more consistency and safety during mining, then power tong that goes at wholesale prices at Alibaba will be an excellent addition to your machinery.

Before buying a component, you’d want the equipment to suit your application and offer value. The list of power tong at Alibaba.com lets you dig into earth deposits, and the compare tool checks out other similar parts to give you the information you need to make a purchasing decision. You’ll get wholesale power tong that specializes in mining, with reinforced chassis, and run on more powerful engines. Whether you want to transport minerals or the workers to the mining site, introduce explosives or arms to help you remove materials from your mine pits, Alibaba.com has it all.

3. Raymond Wu was appointed by the board to be the Vice Chairman of Tong Yang Group and Crispin Wu was appointed by the board as the CEO of Tong Yang Group.

1. After strict verification process carried out by IAOB(International Automotive Oversight Bureau), Tong Yang Industrial Co., Ltd. successfully obtained the ISO/TS 16949 certificate and became the very first OEM supplier in Taiwan that passed the IAOB verification.

Taiwan"s R&D Center has moved to a new building, in which arranges as a whole the group"s R&D capabilities in three major areas- new materials, advanced technologies, and superior products, Tong Yang Goup will continue to grasp the global markets in automotive interior and exterior parts with our new technologies and engineering methods.