what is a power tong operator manufacturer
You’re the one with the power – the power tongs, that is. You control the equipment that threads sections of drill casing to form the pipe that is placed hundreds of metres into the ground. When you arrive at site, the rig crew knows it’s time to get to work. Your strength and dexterity serve you well in this occupation.
Power tong operators control the equipment that threads sections of drill casing into the wellbore. As a member of the oilfield well services team, they are responsible for operating power tongs, torque measuring equipment and tube/casing handling equipment at the well site. Casing is required to maintain an oil or gas well’s structural integrity, prevent the cross-contamination of water with other fluids and control well pressure during the drilling, production and maintenance of the well. Power tong operators must be able to transport equipment to and from the well location, safely rig in and operate the equipment, perform day-to-day inspections, servicing and maintenance of equipment, and complete all required paperwork accurately and on time.
Radial Lock Door: A patented door locking system (US Patent 6,279,426) for Eckel tongs that allows for latchless locking of the tong door. The tong door swings easily open and closed and locks when torque is applied to the tong. When safety is important this locking mechanism combined with our safety door interlock provides unparalleled safety while speeding up the turn around time between connections. The Radial Door Lock is patented protected in the following countries: Canada, Germany, Norway, United Kingdom, and the United States.
Sliding Head: A type of head used in specific Eckel tongs that slides out from a pocket within the tong. This head biting system utilizes our wide angle wrap-around type dies and is considered the best choice of power tong biting systems for use on small tubular and drill pipe.
Torque Control System: A method used to monitor the torque turn values when making up tubular connections (Tubing, Casing, & Drill Pipe). Any flaws in the make-up process will be readily shown in a graph.For more information click here.
2018 marks the 60th anniversary for Eckel. We are the oldest continuous leading manufacturer of world-class hydraulic power tongs and trusted for reliability, safety and high performance.
Eckel 9-7/8 HS-55 Tubing / Casing providing high torque and high continuous rotational torque that you can trust within a compact operational footprint featuring SPACE SAVER™ technology.
Providing a maximum torque of 75,000 ft-lbs (101686 Nm) and 50,000 ft-lbs (67790.9 Nm) continuous rotational torque; well suited for today"s high torque premium casing connections.
The Eckel Model 25 Hydra-Shift® HS-85 features a two-speed motor with two-speed gear train, producing 60,000, 80,000 and 125,000 ft-lb of torque respectively in low-low, at 2,500 psi. This tong easily handles ultra-heavy casing strings from 9 5/8 inches to 25 inches.
The Eckel Model 25 Hydra-Shift® HT-200 Tri-Grip®introduced features a two-speed motor with two-speed gear train, producing 200,000 ft-lb of torque respectively in low-low, at 2,500 psi. This tong easily handles ultra-heavy casing strings from 9 5/8 inches to 25 inches - featuring a three head Tri-Grip®biting system design which like the Tri-Grip®New Revised Version Backup encompasses the tubular to apply an evenly distributed gripping force. The additional head in the tong reduces the risk of radial deformation, die penetration, marking, and wear of the tubular by 1/3 at extreme torques...
The new 7.25 HS HT-80 for Drill Pipe and High Torque Casing Tong takes on the toughest job with make-up and break-out of drill pipe, drill collars and high torque casing with a maximum torque of 80,000 ft-lbs. The 7.25 HS HT-80 is available with a two-speed Hydra-Shift® motor coupled with a two-speed gear train providing (4) torque levels and (4) RPM speeds. The variable speeds can slowly or quickly spin tubulars 2-3/8 through 7 1/4 inch as necessary. Having exceptional gripping capabilities with rig dies for drill pipe or wrap-around dies that securely encompass the tubular limit potential for damage. The 7.25 HS HT-80 is also available with either Eckel Pyramid Fine Tooth dies or True-Grit dies. The 7.25 HS HT-80 is another of our tongs models that exceeds the competition in its class.
Extremely popular among the most successful of pipe handlers, the Model 5 1/2 UHT combines high torque (up to 25,000 ft-lbs) with a wide capacity range. Ideal for handling tubing, casing and small drill pipe. Options include manual backup or Tri-Grip®backups.
The WD Tri-Grip®Backup is a high performance no compromise backup that is suitable for make-up and break-out of the most resilient connections. The WD Tri-Grip®Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. A constant radial load is applied when a single wedge drive to actuate the front two pivot heads with a third stationary head providing a reactionary force to provide a superior gripping performance. Wedge Drive Tri-Grip®Backup has exceptional gripping capabilities with Rig Dies when running drill pipe or optional Eckel Wrap-Around True-Grit dies or Pyramid Fine Tooth dies for making up other types of tubulars.
The 4 1/2 Hydra-Shift® is packed with all the features you"ve come to expect from Eckel: patented cam biting system, quick-change sliding heads, self-aligning open throat. Options include both torque gauge and manual backup or cam-type hydraulic backup. The unit is also available with front or side controls, standard chain bridle suspension, or with its own built-in suspension arm.
When applications demand the combination of size and high torque output up to 120,000 ft-lb, the Eckel Model 20 Hydra-Shift® UHT handles pipe from 7 inches to 20 inches. By utilizing a two speed mechanical shift transmission in conjunction with the two speed Hydra-Shift® motor, the operator has a more flexible choice of torque/rpm"s to work with during make-up or break-out.
The Eckel Model 14 Hydra-Shift® handles pipe from 4 inches to 14 inches and incoporates the Hydra-Shift® technology which provides smoother operating environment and a wider selection of torque/RPM"s that are available to the operator. The 14 Hydra-Shift® is capable of delivering 35,000 ft-lb of torque in low-speed, low-gear. Also available with hydraulic Tri-Grip®backup.
The Eckel Model 30 Hydra-Shift® features a two-speed motor with a two-speed gear train, producing 130,000 ft-lb of torque in low-low at 2,500 psi. Weight 9,000 pounds, this tong easily handles ultra heavy casing strings from 14 inches to 30 inches.
The Eckel Model 14 Hydra-Shift® handles pipe from 4 inches to 14 inches and incoporates the Hydra-Shift® technology which provides smoother operating environment and a wider selection of torque/RPM"s that are available to the operator. The 14 Hydra-Shift® is capable of delivering 35,000 ft-lb of torque in low-speed, low-gear. Also available with hydraulic Tri-Grip®backup.
Except for added torque (up to 24,000 ft-lb) and expanded pipe capacity (from 4 to 13 3/8 inches), the 13 3/8 Standard tong offers the same basic engineering and design as the smaller, lighter Model 10 3/4. Highly recommended where applications demand the ultimate in size range and torque output.
For casing up to 22 inches, here"s a tong that has strong torqueing ability and will handle pipe sizes down to 7 inch. The tong utilizes a two-speed motor and a two-speed gear train, allowing the operator to correctly adjust the tong for the optimum torque and RPM needed for the current application. Maximum torque for the 22 Hydra-Shift® is 80,000 ft-lb.
For casing up to 20 inches, here"s a tong that combines surprising speed with an ability to handle smaller sizes economically (as small as 7 inches). The 20 Standard reaches peak efficiency at just 38 horse power input, thus requiring no "souped-up" power unit. Available torque: 42,000 ft-lb.
An excellent choice where applications demand the combination of size range and high torque output, the Eckel Model 14 UHT handles pipe from 4 inches to 14 inches. Upgraded in design and performance over the Model 14 HS, this tong is capable of delivering 65,000 ft-lb of torque. Also, available with Wedge Drive Tri-Grip®backup which handles pipe from 4 inches to 15.5 inches.
When application demand a wide range of sizes, this tong handles pipe sizes 2 3/8 inches all the way to 7 5/8. Built around the 7 5/8 Standard, the 7 5/8 HS HD provides a thicker rotary gear for more added strength, an additional idler gear, a larger pinion gear, and stronger bearings for load bearing capacity and durability.
When application demand a wide range of sizes, this tong handles pipe sizes 2 3/8 inches all the way to 7 5/8. Built around the 7 5/8 Standard, the 7 5/8 Heavy Duty provides a thicker rotary gear for more added strength, an additional idler gear, a larger pinion gear, and stronger bearings for load bearing capacity and durability.
The Eckel Model 25 Hydra-Shift® features a two-speed motor with two-speed gear train, producing 60,000 ft-lb of torque in low-low, at 2,500 psi. Weighing 6,290 pounds, this tong easily handles ultra-heavy casing strings from 9 5/8 inches to 25 inches.
A maximum torque up to 25,000 ft-lb and a small foot print design this tong meets your application requirements. A two speed mechanical shift transmission in conjunction with the two speed Hydra-Shift® motor provides the operator a flexible choice of torque and rpm"s to work with during make-up or breakout. The 9 5/8 Hydra-Shift® HD is capable of handling a range of pipe from 2 3/8 inches to 9 5/8 inches.
Extremely popular among the most successful of pipe handlers, the Model 5 1/2 UHT combines high torque (up to 25,000 ft-lbs) with a wide capacity range. Ideal for handling tubing, casing and small drill pipe. Options include manual backup or Tri-Grip®backups.
The Eckel 870 DPT combine power tong and Wedg Drive Tri-Grip®Backup, providing a single piece of equipment to replace several...one smooth continuous operation instead of numerous time-wasting steps at each connection...and a quick, safe means of tripping, replacing methods that endanger crew members and pipe string a like. For drill strings up to 8 inch collars, the model 870 offers over 75,000 ft-lb of torque for break-out and make-up operations, plus ample speed for spinning joints.
The Eckel Model 24 UHT features a two-speed motor with single-speed gear train, producing 95,000 ft-lb of torque in low speed, 25,000 ft-lb in high, both at 2,500 psi. Weighing 8,000 pounds, this tong easily handles ultra-heavy casing strings from 13 3/8 inches to 24 inches.
Light, fast and exceptionally rugged, Eckel"s Model 10 3/4 Standard is always in demand where rig floor space is at a minimum. For pipe sizes from 4 to 10 3/4 inches, it delivers a stout 20,000 ft-lb of available torque.
Except for added torque (up to 24,000 ft-lb) and expanded pipe capacity (from 4 to 13 3/8 inches), the 13 3/8 Standard tong offers the same basic engineering and design as the smaller, lighter Model 10 3/4. Highly recommended where applications demand the ultimate in size range and torque output.
An excellent choice where applications demand the combination of size range and high torque output, the Eckel Model 14 UHT handles pipe from 4 inches to 14 inches. Upgraded in design and performance over the Model 14 HS, this tong is capable of delivering 65,000 ft-lb of torque. Also, available with Wedge Drive Tri-Grip®backup which handles pipe from 4 inches to 15.5 inches.
When applications require the combination of size and torque up to 18,000 ft-lbs, the Eckel 9 5/8 Hydra-Shift® (Narrow Body) meets these requirements. The narrow body design allows this tong to easily operate on smaller rig configurations. A two speed mechanical shift transmission in conjunction with the two speed Hydra-Shift® motor provides the operator a flexible choice of torque and RPM"s to work with during make-up or breakout. The 9 5/8 Hydra-Shift® is capable of handling a range of pipe from 2 3/8 inches to 9 5/8 inches.
When applications require the combination of size and torque up to 18,000 ft-lbs, the Eckel 9 5/8 Hydra-Shift® (Narrow Body) meets these requirements. The narrow body design allows this tong to easily operate on smaller rig configurations. A two speed mechanical shift transmission in conjunction with the two speed Hydra-Shift® motor provides the operator a flexible choice of torque and RPM"s to work with during make-up or breakout. The 9 5/8 Hydra-Shift® is capable of handling a range of pipe from 2 3/8 inches to 9 5/8 inches.
The 14 HS HT Tri-Grip®Tong is used for making up and break out casing and risers. Capable of handling tubulars from 4 in. to 14 in. (101.6 - 355.6 mm) in diameter with a maximum torque of 135,000 ft-lbs (183035.4) of torque capacity. A two-speed Hydra-Shift® motor coupled with a two-speed gear train provides (4) torque levels and (4) RPM speeds. The tong features a three head - Tri-Grip®biting system design which like the Tri-Grip®Backup encompasses the tubular to apply an evenly distributed gripping force. The additional head in the tong reduces the risk of radial deformation, die penetration, marking, and wear of the tubular by 1/3 at extreme torques. The tong performs exceptional gripping capabilities with either Eckel True-Grit dies or Pyramid Fine Tooth dies.
Light, fast and exceptionally rugged, Eckel"s Model 10 3/4 Standard is always in demand where rig floor space is at a minimum. For pipe sizes from 4 to 10 3/4 inches, it delivers a stout 20,000 ft-lb of available torque.
The Eckel Top Drive Casing Tong is a tool developed for use on hydraulic top drive rigs to provide a high quality connection while reducing tubular damage and providing a safer enviroment for crews. With an operating capacity of 4 1/2 inch through 10 5/8 inch, is connected to the output stem of the power swivel. After installation the tong becomes an integral part of the swivel, raising and lowering as a unit and transfering the power swivel"s RPM and torque to the pipe/connection. A guide attached beneath the top drive tong simplifies alignment of the collar within the tong. Once the collar of the pipe is enclosed within the top drive tong, the tong will grip the collar by operating the power swivel. Torque and rotational speed are controlled through the operation of the power swivel. Reversal of the power swivel will cause the tong jaws to release. Tong jaws are spring loaded to retract away from the collar. Utilizing three gripping jaws and a patented Eckel Cam Biting System to grip the pipe collar. The same type of proven biting system found in the industry leading Eckel Power Tongs. These jaws are spaced evenly about the circumference of the collar to provide even distribution of the gripping forces
The Oil & Gas Industry has needed a specialized power tong with an integral backup. This tong is sized small enough and has the right amount of controlable torque output. It is designed so as to properly grip small tubulars such as small macaroni type strings of tubing.
This tong incorporates Eckel"s Hydra-Shift® technology for smooth tranfers of power and speed directly to the tubular. Special built in torque control valving allows the operator to pre-set the maximum desired torque for the connection. This tong also incorporates our new Radial Lock Door. If you are looking for a tong for this lighter type of word look no further.
Except for added torque (up to 24,000 ft-lb) and expanded pipe capacity (from 4 to 13 3/8 inches), the 13 3/8 Standard tong offers the same basic engineering and design as the smaller, lighter Model 10 3/4. Highly recommended where applications demand the ultimate in size range and torque output.
An excellent choice where applications demand the combination of size range and high torque output, the Eckel Model 14 UHT handles pipe from 4 inches to 14 inches. Upgraded in design and performance over the Model 14 HS, this tong is capable of delivering 65,000 ft-lb of torque. Also, available with Wedge Drive Tri-Grip®backup which handles pipe from 4 inches to 15.5 inches.
When applications require the combination of size and torque up to 18,000 ft-lbs, the Eckel 9 5/8 Hydra-Shift® (Narrow Body) meets these requirements. The narrow body design allows this tong to easily operate on smaller rig configurations. A two speed mechanical shift transmission in conjunction with the two speed Hydra-Shift® motor provides the operator a flexible choice of torque and RPM"s to work with during make-up or breakout. The 9 5/8 Hydra-Shift® is capable of handling a range of pipe from 2 3/8 inches to 9 5/8 inches.
Extremely popular among the most successful of pipe handlers, the Model 5 1/2 UHT combines high torque (up to 25,000 ft-lbs) with a wide capacity range. Ideal for handling tubing, casing and small drill pipe. Options include manual backup or Tri-Grip®backups.
An excellent choice where applications demand the combination of size range and high torque output, the Eckel Model 14 UHT handles pipe from 4 inches to 14 inches. Upgraded in design and performance over the Model 14 HS, this tong is capable of delivering 65,000 ft-lb of torque. Also, available with Wedge Drive Tri-Grip®backup which handles pipe from 4 inches to 15.5 inches.
When application demand a wide range of sizes, this tong handles pipe sizes 2 3/8 inches all the way to 7 5/8. Built around the 7 5/8 Standard, the 7 5/8 Heavy Duty provides a thicker rotary gear for more added strength, an additional idler gear, a larger pinion gear, and stronger bearings for load bearing capacity and durability.
Compact Size...Big Torque...if this is what you are looking for in a power tong, look no further. Our 5-1/2 Hydra-Shift® is sized smaller in width than our 5-1/2 Standard model. Like all of our newly developed tongs, the 5-1/2 incorporates the Hydra-Shift® technology, allowing the operator to shift from high speed to low speed without having to manually shift the tong. You will see many years of trouble free operation, not to mention the smoother hydraulic shifting. With two models to choose from, Eckel has the right 5-1/2 Hydra-Shift® for your needs. The 5-1/2 Hydra-Shift® LS with a two-speed motor and a single-speed gear train is the original 5-1/2 Hydra-Shift® which has gained wide acceptance in the industry. Slide heads with rig dies are available for handling drill pipe tool joints.
Special applications and tough requirements demanded that we respond with a new tong designed and built with today"s pipe handling challenges in mind, the 8 5/8 Hydra-Shift® HT. By utilizing a two speed mechanical shift transmission in conjunction with the two speed Hydra-Shift® motor, the operator has a more flexible choice of torque/RPM"s to work with during make-up or break-out. At the beginning of the job, the operator will choose a tong gear ratio that is most appropriate for the current tubular connection and shift the variable speed motor handle into high or low as required. This tong also offers sliding heads with wrap-around dies which provides an evenly applied pressure to the pipe and a greater pipe gripping coverage which in return reduce tubular damage. This tong not only offers the operator the speed options down to the slow speed parameter now demanded by the pipe manufactures and oil companies, it also has the option of speeds of 100 RPM"s when required. Available torque: 40,000 ft-lb
When application demand a wide range of sizes, this tong handles pipe sizes 2 3/8 inches all the way to 7 5/8. Built around the 7 5/8 Standard, the 7 5/8 Heavy Duty provides a thicker rotary gear for more added strength, an additional idler gear, a larger pinion gear, and stronger bearings for load bearing capacity and durability.
When higher torque performance than 10 3/4 Standard is required, the Eckel 10 3/4 Heavy Duty provides the performance you need. Model 10 3/4 Heavy Duty is always in demand where rig floor space is at a minimum. For pipe sizes from 4 to 10 3/4 inches, it delivers a stout 25,000 ft-lb of available torque.
Eckel Tri-Grip®an industry standard for reliable backup in make-up and break-out of tubular connections and optionally supplied with Eckel tongs. Eckel backups utilize hydraulic cylinders and a head arrangement that insures slip-free operation. The hydraulic backup is suspended at an adjustable level below the power tong by means of three hanger legs and allowing the backup to remain stationary while the power tong moves vertically to compensate for thread travel of the connection. The Tri-Grip®uses two pivoting heads and one stationary while the cam backup uses two head to grip tubulars using a head and cam configuration that is similar to the method the tong grips tubulars.
The Eckel Closed Mouth Tongs uses three sliding heads with each head equipped with a wide angle wrap-around die. This provides a maximum gripping area of 342 degrees; on the pipe. The CMT"s utilizes the Hydra-Shift® shifting technology which allows the operator to shift from high to low speed without stopping the tong. Reversing the pipe rotation is effortless and done simply by pulling the tong control in the opposite direction. There is no need to physically take out the jaws and turn them over as there is with other brands of closed head tongs. The CMT"s also come with an optional backup that utilizes the same heads/dies as the tong.
The Model 4 1/2 UHT-13 is rugged, light weight tong capable of providing 8,500 ft-lb of torque at 2,500 PSI. The tong will handle pipe from 1.050 inches to 4 1/2 inches. A notable feature is the Eckel patented quick-change sliding head biting system that compensates for worn or under gauge pipe. Also available with an optional rod package for sizes 5/8 inch through 1-1/8 inches and your choice of manual type or hydraulic type backups.
For casing up to 17 inches, here"s a tong that combines speed and the ability to handle smaller sizes economically. If you are running 17 inch casing, give this tong a try. The 17 Hydra-Shift® features the two-speed motor and the two-speed gear train which allows for multiple selections of torque or RPM, not to mention the smoother operation of the tong.
The Eckel Model 14 Hydra-Shift® handles pipe from 4 inches to 14 inches and incoporates the Hydra-Shift® technology which provides smoother operating environment and a wider selection of torque/RPM"s that are available to the operator. The 14 Hydra-Shift® is capable of delivering 35,000 ft-lb of torque in low-speed, low-gear. Also available with hydraulic Tri-Grip®backup.
The Eckel 3500 Hydra-Shift® DTT (Dual Tubing Tong) provides fast, easy running on dual strings of 3 1/2 inch or smaller tubing. It grabs from the side, or head-on. Go ahead and torque it up; this tong is Eckel tough. And speed shifts are no problem, thanks to a patented Hydra-Shift® concept that eliminates clutching. The Model 3500 DTT Hydra-Shift® is packed with all the features you"ve come to expect from Eckel: quick-change sliding heads, self-aligning open throat.
Except for added torque (up to 24,000 ft-lb) and expanded pipe capacity (from 4 to 13 3/8 inches), the 13 3/8 Standard tong offers the same basic engineering and design as the smaller, lighter Model 10 3/4. Highly recommended where applications demand the ultimate in size range and torque output.
The big, capable Model 36 UHT easily produces 100,000 ft-lb of torque for makeup or break-out operations involving casing in sizes 16 inches through 36 inches. Weighing approximately 13,000 pounds, this casing tong is 81 inches wide and 135 inches in length. A two-speed motor delivers 16 RPM in high, 3 1/2 RPM in low range, both at 70 GPM.
The Eckel 870 DPT combine power tong and Wedg Drive Tri-Grip®Backup, providing a single piece of equipment to replace several...one smooth continuous operation instead of numerous time-wasting steps at each connection...and a quick, safe means of tripping, replacing methods that endanger crew members and pipe string a like. For drill strings up to 8 inch collars, the model 870 offers over 75,000 ft-lb of torque for break-out and make-up operations, plus ample speed for spinning joints.
Eckel has been at the forefront of this developing technology with the development of larger wrap-around type dies for many of its tong models. Wrap-Around Dies are symmetrically spaced from each other at all times insuring an equally distributed load on the tubular.
The 4 1/2 Hydra-Shift® is packed with all the features you"ve come to expect from Eckel: patented cam biting system, quick-change sliding heads, self-aligning open throat. Options include both torque gauge and manual backup or cam-type hydraulic backup. The unit is also available with front or side controls, standard chain bridle suspension, or with its own built-in suspension arm.
An excellent choice where applications demand the combination of size range and high torque output, the Eckel Model 14 UHT handles pipe from 4 inches to 14 inches. Upgraded in design and performance over the Model 14 HS, this tong is capable of delivering 65,000 ft-lb of torque. Also, available with Wedge Drive Tri-Grip®backup which handles pipe from 4 inches to 15.5 inches.
The Model 5 1/2 Standard is the first open-throat design in its size range to generate 12,000 ft-lb of available torque. Versatility is the name of the game here as this tong works well whether powered by a workover rig or a portable casing tong power unit. Options include manual backup or cam-type hydraulic backups.
Extremely popular among the most successful of pipe handlers, the Model 5 1/2 UHT combines high torque (up to 25,000 ft-lbs) with a wide capacity range. Ideal for handling tubing, casing and small drill pipe. Options include manual backup or Tri-Grip®backups.
Light, fast and exceptionally rugged, Eckel"s Model 10 3/4 Standard is always in demand where rig floor space is at a minimum. For pipe sizes from 4 to 10 3/4 inches, it delivers a stout 20,000 ft-lb of available torque.
When applications demand a wide range of sizes, the 7-5/8 Standard tong handles pipe sizes 2-1/16 inches all the way to 7-5/8. Its rugged design is based upon knowledge gained from the 5-1/2 model...combining an extremely compact, high torque concept with added versatility. Options include either manual backup or Tri-Grip®backup. Available torque: 15,000 ft-lb
For casing up to 20 inches, here"s a tong that combines surprising speed with an ability to handle smaller sizes economically (as small as 7 inches). The 20 Standard reaches peak efficiency at just 38 horse power input, thus requiring no "souped-up" power unit. Available torque: 42,000 ft-lb.
The Eckel Model 24 UHT features a two-speed motor with single-speed gear train, producing 95,000 ft-lb of torque in low speed, 25,000 ft-lb in high, both at 2,500 psi. Weighing 8,000 pounds, this tong easily handles ultra-heavy casing strings from 13 3/8 inches to 24 inches.
Straight Tong Die Driver: Used for die slot redressing, the straight tong die driver is the simplest of type of rig tong. Though it is also the simplest type of rig tong to use, it is also the least safe of the three. Its handle and handguard protect hammer blows from falling onto the grip. Straight tong die drivers are lightweight—under eight pounds—and measure in at around 1”.
Angled Tong Die Driver: The angled tong die driver has a grip that’s angled away from the perpendicular tong as well as brass guards for the tong tip and handle, making this rig tong safer than the straight tong die driver. While this tong is safer, however, it’s actually harder to keep the angle tong die driver in place. This driver is similar in length to the straight tong die driver, but is about two pounds heavier, weighing in at over nine pounds.
Hammerless Tong Die Driver: This variety of tong die driver is made up of a hand pipe that can be used to apply pressure to the tong’s tip without using a hammer at all. This option is the safest of the three driver types because there’s no hammer required, it’s also the slowest driver for this same reason. The hammerless tong die driver is about as long and weighs as much as the straight tong die driver.
What oilfield tools does your operation need? Keystone Energy Tools has atool to fit your bill.Contact us today to learn more about how rig tongs can make your work environment safer, and to learn more our other oil and gas industry products.
K&S Power Tongs is a well-known power tong company operating for 24 years. We are hiring a seasoned full-time Power Tong operator immediately. We take care of our employees with competitive pay, health/dental benefits as well as health and wellness spending accounts.
Position Summary: The Tong Operator is to safely operate casing and tubing tongs, power units, and handle tools used in tubular make-upPosition Duties: • Employee will be required to communicate with the drillers and floorhands for the proper placement and operation of conventional casing tools and equipment. • This employee is expected to maintain equipment and provide field support. • Should be able to understand information that has been gathered to run a job in the field. • Transport crews and equipment to job site if assigned. • Supervise and help with rigging up and down of power tongs, power units and tubular handling equipment. • Visually inspect equipment before, during, and after jobs to ensure field readiness and safe operation of equipment. • Conduct safety meetings with crew. • Perform all duties of casing installation. • Work assignments carried out to the highest quality level. • Perform various other duties and activities as assigned by supervisor within the physical constraints of the job. • Perform other duties as assigned including other equipment operations. • Able to be on call 24-7 unless scheduled and approved for time-off/PTO. Competencies required for effective performance: • Valid Driver License. • One year experience. Will train the right candiadates
• Common knowledge of sizes and weights of casing. • Strong communication and interpersonal skills. • Ability to work with minimal supervision. • Safety and service oriented. • Team player. • Positive attitude. • Good problem solving skills. • Ability to read and write at high school level. • Ability to add, subtract, multiply, divide at high school level. • Ability to communicate verbally with customer(s) and co-workers(s) • May be asked to operate a company vehicle. Work Environment: • Typically works in a moderately noisy environment. • Routine exposure to the elements, including working outdoors and in a non-climate controlled building. • Repetitive motions
Texas International Oilfield Tools (TIOT) offers a free standing test stand for testing of hydraulic casing and tubing power tongs. The test stand is designed to resist torque applied by a power tong through a test mandrel.
The test stand is an air operated device that utilizes a hydraulic active dual spring disc brake chamber in order to apply friction force (“brake” action) to the rotating (or stationary) test mandrel mechanism. The power tong is tested by applying torque to the test stand’s mandrel. The test stand’s brake is activated by pushing and twisting clockwise the red control box button on the control box. A brake foot pedal is supplied as backup for the mini power unit. Using the control box mounted on the test stand, the black knob regulates pressure.
The terms VARCO, VARCO-BJ, and BJ are trademarks of Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Texas International Oilfield Tools is not an authorized distributor of any Varco I/P or NATIONAL OILWELL VARCO product. Texas International Oilfield Tools is not affiliated with Varco I/P, Inc., National Oilwell Varco, L.P., or their affiliates. Varco I/P, Inc., National Oilwell Varco, L.P., and their affiliates do not endorse any Texas International Oilfield Tools’ products or replacement parts.
Magnum Manufacturing. has successfully mastered the design and manufacturing processes of creating a better hydraulic tong. By decreasing the weight of the tong and increasing the power, Magnum Power Tongs out perform the torque to weight ratio of any competitor. Constructed of premium quality materials, Magnum"s unique system delivers safe, efficient, and reliable performance on every job. Find out more..
Premiere, Inc. CRT / PRT Casing Equipment includes patent pending efficient equipment as Single and Dual Stage Diesel Power Units (DPU), the Magnum Manufacturing exclusive Multi-Grip Bowl and more. Technology at the Intersection of Obsession & Innovation. Find out more..
The Magnum Manufacturing Rotating Cement Head (RCH) executes the customer’s reciprocating and rotating cementing process while conditioning the well during the cement job. Designed for longevity, the RCH features a no-leak swivel design that allows for continuous rotation over extended periods of time, resulting in a better cement job. Find out more..
Magnum Manufacturing has released its latest invention in cutting edge tubular running technology. The Magnum Alignment Tool connects to any top drive and allows the operator to remotelyadjust the position of each joint of casing or tubing directly over the well bore.... Find out more..
Designed with safety in mind, Premiere’s casing running tool (PRT™) is the result of cutting edge engineering and field tested standards. The PRT™ features a compact design, rugged construction, and the versatility to run various pipe sizes and weights without compromising performance. Find out more..
Premiere Torque Rings (PTR™) are an innovative, patented technologythat providepremium connection performance at a significantly reduced cost. By creating a positive shouldered makeup identical to a premium connection, API certified pipe can be run, rotated, and reciprocated at a significantly greater torque value without the risk of thread damage. Find out more from Magnum Manufacturing
Magnum Manufacturing stocks the Premiere’s re-drill casing reamer shoe (washed, rotated and reamed to the planned total depth) completing full string handling capabilities for casing running operations, thereby decreasing a number of problematic well-bore ... Find out more..
The Magnum Tubular Flow Tool allows the operator to fill or circulate casing while it is being run into the well. Due to the large flow area it is designed to flow back conditions when float equipment is not being utilized. Our oilfield equipment is designed with safety in mind. Find out more..
Minimum 4-5+ years related experience High School diploma, skilled labour certificate or equivalent. Strong operational and maintenance knowledge of equipment Valid Commercial Driver"s License or the ...
Minimum 4-5+ years related experience High School diploma, skilled labour certificate or equivalent. Strong operational and maintenance knowledge of equipment Valid Commercial Driver"s License or the ...
include but are not limited to: Safely and efficiently performing all tasks on the rig floor and B.O.P. area under the direction and supervision of the Driller. Operating the tongs, slips, and spinners ...
are prominent in every aspect of drilling the well, manual handling of tubular and tools, making up or breaking out during making connections or tripping pipe. The position is responsible for the processes ...
Desarrollar todas las actividades de Tubular Running Services cumpliendo con los procedimientos Operativos de la compania en cuanto a corridas de revestimientos, completamiento, produccion (Tubing), todo ...
2 or more years related field experience in the of the following disciplines Torque Turn Systems Power Tong Systems Handling Tool Systems High School diploma (or Secondary School Diploma or equivalent) ...
are prominent in every aspect of drilling the well, manual handling of tubular and tools, making up or breaking out during making connections or tripping pipe. The position is responsible for the processes ...
are prominent in every aspect of drilling the well, manual handling of tubular and tools, making up or breaking out during making connections or tripping pipe. The position is responsible for the processes ...
are prominent in every aspect of drilling the well, manual handling of tubular and tools, making up or breaking out during making connections or tripping pipe. The position is responsible for the processes ...
are prominent in every aspect of drilling the well, manual handling of tubular and tools, making up or breaking out during making connections or tripping pipe. The position is responsible for the processes ...
The Field Specialist IV will rig up, rig down and run TRS (Tubular Running Services) equipment at location with no supervision, lead and train less experienced Operators. Prepare accurate tickets, job ...
of the Floorhand include: Assisting the Derrickhand, Motorhand and Driller on the drill floor while making trips; Operating manual tongs and slips to connect and disconnect drilling pipe and drilling ...
of the Floorhand include: Assisting the Derrickhand, Motorhand and Driller on the drill floor while making trips; Operating manual tongs and slips to connect and disconnect drilling pipe and drilling ...
4 Star USA is currently seeking experienced oilfield personnel to support our rapidly expanding casing running company. 4 Star USA is a family-owned Casing Service company operating in the Permian Basin based out of Odessa, TX. 4 Star USA offers a full-time position with competitive wages.We are committed to establishing long-term, mutually satisfying relationships with both our team members and our clients.
We base our relationships with team members and clients on openness and integrity. You can expect us to provide you with the training, knowledge, and business platform to experience significant personal growth.We expect aggressive growth to realize our vision.
What’s in it for you?Growth— our approach makes it possible for talented and hard-working team members to make a difference and have their successes based solely on their effort. At the same time, as we grow, we will always have opportunities for those who deliver results on a consistent basis.
Great work environment— we believe in a balanced, team-oriented environment. We understand that running casing is a difficult job, so we offer new equipment and an unmatched safety record, not only for our clients but for our team.
Accountability and autonomy— with the support of our team, you will drive your own success and determine the most effective ways to reach your personal goals.
Exceeding expectations is not only the key to our company’s success but also the key to your success within this role. At a fundamental level, your performance will depend on your ability to manage personnel to work the rig floor while running casing. You do not need extensive experience if you are friendly, hardworking, and follow our procedures. We will give you the training you need to succeed. Additional keys to your success include:Ability to “rise to a challenge”— as in any business, challenges often arise and we will look to you to remain flexible, communicate openly regarding obstacles you encounter, and to develop creative strategies to overcome those obstacles.
Excellent communication, negotiation, and interpersonal skills— you will need to build solid relationships with a wide range of personalities and skill levels to successfully deliver our services.
Self-motivation — in an environment with little micro-management, we will depend on you to be highly driven, efficient, and organized as you manage competing priorities and work independently to accomplish your goals.
“Team player” attitude — we employ an exceptional group of professionals, each with his/her own specialty that is essential to the success of the team. We’ll expect you to not only work with those around you in a respectful fashion, but to also be willing to step in and support the team when your skills are in demand.
4 Star USA is a family-owned oilfield service company providing casing running services and equipment rental in the Permian Basin with headquarters in Odessa, TX, USA.
This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.
* Please note that all salary figures are approximations based upon third party submissions to SimplyHired or its affiliates. These figures are given to SimplyHired users for the purpose of generalized comparison only. Minimum wage may differ by jurisdiction and you should consult the employer for actual salary figures.