2 fig 1502 pup joint manufacturer

PME Industrial supply Chiksan type flowline piping 2" FIG 1502 Male x Female to oilfield supply companies, drilling companies in United States, India, Indonesia, Mexico, Malaysia, United Arab Emirates, Egypt, Brazil and Russia.

PME integral pup joints are forged by treating iron, heat treatment and machines under strict quality control system. PME Industrial supply flowlines irons pup joint as Schlumberger, Chiksan, WECO, FMC for onshore and offshore usage.

Contact PME today for integral pup joint HS Code, pup joint specs in PDF, well thickness for integral pup joint 5" 10K by Email contact@pmeindustrial.com or call directly +86 138 1899 0736

PME Industrial integral pup joint can be used in oilfield standard service and sour gas (H2S) service. As a part of high pressure manifolds, Shanghai PME high pressure flow iron function well as FMC Chiksan pup joint FIG1502, FIG602, SPM flow control products 2" & 3" 1502, and WECO fittings and pup joints.

Worldwide stockist, distributor, oilfield service contract, trade agent for high pressure flow equipment supply are welcomed to send RFQ.  This email address is being protected from spambots. You need JavaScript enabled to view it. offer you quotation with best price, delivery time and sample necessary test certificateof integral pup joints.

PME Industrial is the great supplier of high pressure Chiksan type pup joints in China. PME pup joint  are forged in quality alloy steel like A105, 35CrMo, AISI 4130 or other quality raw material for high pressure H2S sour gas service.

Besides of using as high pressure piping, PME integral pup joints are main parts ofhose loopfor oil and gas application, which is also namedcirculating and cementing hose line.

Chiksan type pup joints assembled with plug valves, choke valves, integral tee male x male x female,integral crossover can be made aschoke kill manifold assembly in FIG 602, FIG 1002, FIG 1502.

Just tell us the size (1", 2", 3", 4" 5" or 6"), working pressure (6000 psi, 10000 psi, 15000 psi, 20000 psi), length (1m, 2m, 3m, 4m, 5m, 2ft, 3ft, 4ft, 6ft, 8ft, 10ft, 12ft), standard service or H2S sour gas service, you will receive great offer and strong support ofintegral pup joints made in China!

we offers robust integral pipe in sizes 2” through 3” in pressure ratings to 15,000 psi CWP. Integral pipe is recommended for use in applications where strong cyclic loading is possible. Our integral pipe is available in

integral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaintegral pup joint / 1502 union pup joint / flowing pipe made in chinaAPI 6A Flowline Weco FIG1002 Integral pup joint API 6A Flowline Weco FIG1002 Integral pup joint API 6A Flowline Weco FIG1002 Integral pup joint API 6A Flowline Weco FIG1002 Integral pup joint API 6A Flowline Weco FIG1002 Integral pup joint Chiksan pup joint for swivel loopsChiksan pup joint for swivel loopsChiksan pup joint for swivel loopsChiksan pup joint for swivel loopsChiksan pup joint for swivel loopsHigh pressure pup joint with FIG1502 unionHigh pressure pup joint with FIG1502 unionHigh pressure pup joint with FIG1502 unionHigh pressure pup joint with FIG1502 unionHigh pressure pup joint with FIG1502 unionHigh pressure pup joint with FIG1502 unionHigh pressure pup joint with FIG1502 union

Pup joints (flowline pipes) are pipe lines with thread, flange or union connectors on both ends, designed to be compatible with FMC Chiksan pup joints and SPM pup joints.Various pup joints are available for high/low pressure and temperature and H2S environment,such as integral pup joints( 10 feet length to handle fluids at cold working pressure), sour gas pup joints, pressure thread seal straight pipes and non-pressure thread seal pup joints.

Pup joints are forged from superior alloy steel with partial heat treating process, which are widely used for transporting high pressure flow in fracturing line, cementing line and NACE Service. Pup joints have been optimized for minimum weight and size to extend service life, easy to transport and install on site.

- Integral pup joints can be made available with two models, one is plain integral pup joints, another is pup joints with retaining shoulder, integral pup joints with retention shoulder features specially machined shoulder to prevent nut from sliding down pup joints when held vertically.

Integral Pup Joints are used for transporting high-pressure flow in fracturing, cementing, maintenance, and test manifolds. These are made from high-quality alloy steel, integrally constructed, forged-ended features seamless upset construction. Standard integral pup joints are available in different models, pressure, and temperature rating.

PME Integral Pup Joints on wellhead equipment are manufactured from high quality alloy steel, available in 2" and 3" size, working pressure up to 20000 Psi. Our oilfield service companies clients buy pup joint from PME with HS code 8424909090 for oil field equipment purpose onshore and offshore operation.

Like PME other flowline products, PME integral fittings and pup joints are designed and manufactured as API standard, for transporting high pressure fluid with unions connections in choke and kill manifold, well testing, flow line, fluid control, flow back and cementing applications.

Connection of PME Integral Pup Joints are Hammer Weco Unions, enable to make-up and break-out of temporary flow lines more faster and easier. Unions figures 1502, FIG602 and others as operation demand.

As high pressure flow line pipes, PME supply integral pup joints assembly 2 fig 1502 m x f unions end, 2 inch FIG1502 pup joints NPST 10 ft, standard, butt weld pup joints x-overs 1502, 15000 Psi, 1ft, 5ft, 10 ft and 15ft, PME pup joint Ass.hose 3 inch npst alloy steel Fig.

Prefabricated Pup joints & fittings are used for temporary operations and removable piping systems. Each component is fitted with wing union ends for fast and easy installation. Commonly used in upstream oil & gas well sites, it can be useful in all industrial applications.

Six combinations of equal tee fittings are available. When ordering tees, specify your requested position of male and female ends from left to right and perpendicular branch (M for male, F for female) as shown on figure: 1 x 2 x 3.