3 high pressure pup joint rack drawings price

Swivel loop Pup jointis cementing and fracturing equipment delivery High Pressure Fluid Control Products. Widely used in the acidic operating environment (excluding containing CO2, H2S sour gas operating environment) in the high-pressure discharge line, input line, a temporary flow line, well testing, and other high-voltage transmission lines on pipelines.

Pup jointmade of high strength steel, with a special toughening process. It uses Acme threaded connection, making it with the demolition convenient, fast, reliable connection, and reliable. Multiple seal design and high precision, to ensure the sealing performance of Pup joint.

4. Each technical parameters and performances of pup joints conform to standards of API Spec 6A and can be exchanged with like products internationally.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Crossover pup joints are manufactured from seamless mechanical tube. As with all Crossover products, each piece is marked with a distinctive job number and heat number that is fully traceable. A complete range of sizes (1" to 4.5"), weights (standard or heavy wall), and grades (J-55, N-80, L-80, and P-110) are commonly available from stock in 2", 3", 4", 6", 10", and 12" lengths. Lengths up to 20" are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

Crossover, Inc. handles many types of API Couplings. As a rule, we stock enough of your common couplings which enable us to ship the same day if needed. We carry in stock J-55, L-80, N-80, and P-110. As for sizes, we carry 2 3/8”, 2 7/8” 3 ½”, 4 ½” tubing and some of the casing sizes up to 13 3/8”. Stock connections are EU 8 Rd., Nu 10 Rd., LTC, STC, and BTC. Our couplings are primarily of USA manufacture. If origin is not important, we can source other origins and sometimes beat the USA manufactured cost.

Swages are generally Box x Pin with a transition on the outside diameter and the inside diameter of the swage to assure that there are no sharp corners to set up an area of stress risers. When stress risers occur, there is a chance that the part could fail due to the fact that the part would be prone to crack in these areas.

A blast joint is shorter in length than standard tubular joint. Built with a heavy wall pipe it is incorporated in the production string to facilitate production across any perforated interval and zone. Blast Joints are manufactured to the following specs connections, lengths, weights and material grade.

Crossover Blast Joints are heavy wall pin by box connectors used in tubing strings and are designed to minimize the effect of external erosive action caused by production fluids. Blast joints are located opposite the location of perforations in the production casing or just below the tubing hanger in sand frac designs. Crossover blast joints are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2” OD. Any length, grade of material, and threading is available at the customers request. Typical lengths are 10" and 20". Both API and Premium threads are available.

Crossover Flow Couplings are heavy wall box by box connectors used in tubing strings and are designed to minimize the effect of internal erosive action caused by production fluids. Flow couplings are located just above or below Landing Nipples, Safety Valves or Control Devices where turbulent flow problems are likely to occur. Crossover flow couplings are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2” OD. Any length, grade of material, and threading is available at the customers request. Typical lengths are 3" and 6". Both API and Premium threads are available.

Crossover Coarse Thread Tubing Safety Joint provides for emergency recovery of the major portion of the tubing string should it become necessary to abandon the equipment below. Precision left-hand threads facilitate the release of the joint by right-hand tubing rotation. Equipment requiring right-hand rotation should not be used below the Safety joint.

Crossover Straight-Pull/Shear-Out Safety Joint is used between packers in dual and triple completions and in selective completions using Hydrostatic Single-String Packers. It is also used when rotational releasing is not desired. When ran above the upper packer in a single-string completion, however, the shear value should be adjusted to compensate for any hydraulic conditions that exist when the string is landed, or that are created by well treating operations. They are available in keyed and non-keyed configurations.

Crossover Drop Ball Circulating Subs are manufactured from AISI 4140/4145. The standard is pin by box. They are activated by dropping a chrome steel ball, which lands on a sleeve and as pressure increases, the pins in the sleeve are sheared. This causes the sleeve to move down and expose four ports in the side of the sub diverting the fluid flow.

Crossover"s Drop-in Check Valve is a retrievable check valve. It is retrievable by means of a retrievable tool (gravel girdie) run in on wireline. When needed the check valve is pumped down the drill string to the landing sub. The dogs are locked in place with pressure from below the valve. The check valve will open to allow circulation and close when circulation is stopped.

Crossover rotary shoes are manufactured from specially tempered steel to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore. Each shoe is tailored to fit a particular downhole need and normally is run on the bottom of one or more joints of washover pipe. Shoe design is dictated by whether it cuts on the bottom, on the OD, on the ID, or any combination of these. When hole sizes permit, additional clearances can be cut using side ribs, thus providing greater circulation.

Whether you need multiple parts or are adding to existing equipment, RDI’s pup joints are built to suit your flowback needs in standard and sour service.

With customizable options, our plugcatchers are rated for 10,000 or 15,000 CWP. Depending on your requirements we can use different styles of crossovers and pup joints to get the solution you need. We test every one of our plugcatchers at time and a half CWP before they ship.

Our standard plugcatcher design flows in at 3” Fig 1502 and flows out at 2” Fig 1502 or 3” fig 1502 to handle normal flowback operations. Customizable design options are available upon request.

With custom pipe clamps and an innovative thread design for the crossover and screen; our plugcatchers have zero welding on all of the high pressure iron. This safety feature prevents micro cracking that is often found in welding heat treated metals.

Producing a high performing plugcatcher is easier when you have complete control. Every plugcatcher component has the FlowValve signature, from plug valves, tees, crosses, pup joints and crossovers right down to the skid. When we sign off on something, we always stand behind it.

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Integral → The pup joints are one-piece construction made from alloy steel and feature wing union end connections that eliminate welds and threads. The pup joints are capable of handling a variety of fluids and a working pressure of 15,000 psi. Available in lengths up to 15 feet, they are pressure rated to 10,000 psi for sour gas service.

There are now 3 charts and one formula on this page showing water flow through a pipe. These 3 charts come from 3 different sources, and they all are just general guidelines. and should not be relied on as a

shown using nothing but gravity in a low head pressure situation to power the flow. The 2nd set of columns show what you can expect using an average pump with a pressure from 20 to 100psi. The 3rd set of columns is the maximum flow based

on maximum recommended velocity of the liquid in the pipe. You may exceed this, but you will have to contend with excessive noise and exceedingly high inertial impacts. (I.e. Possible system failure due to hydraulic hammer effects.) This

is a very general guide and is subject to many variables. Pressure, noise allowance, bends, fittings, viscosity, etc. affect how much liquid will flow through a pipe of given size. If you can accept more noise and have higher pressure, you

system will be noiseless. Sometimes experimentation is the only sure way to know if a system will be noisy or not. The flow rates shown are for water, with viscosity of 1. Higher viscosity liquids will flow less, lower viscosity liquids

or yellow range. The green range is safest, most efficient and will produce little to no noise. Flow velocities in the yellow range may be noisy and have additional back pressure. Flow velocities in the red are not recommended because of

Note: Back pressure (restriction) is exponentially dependent on flow velocity. For example in a 1" pipe going from a flow velocity of 2 ft/sect (about 5gpm) to a flow velocity of 3.86 ft/sec (about 10gpm) will increase back pressure by

These figures are for straight pipe only! The effect of putting direction changes in will compound the back pressure even more and could even result in failure of the system or burning up the pump. You will never be hurt by going to a

Note: One of the benefits of using Flexible PVC pipe is being able to make long gradual bends instead of using fittings which will allow more flow with less noise, less back pressure, and less load on the pump. In other words, a more efficient system!

*"High Pressure" is a general and non-specific figure. What might be "high pressure" for 1/2" pipe (600psi) may not be "high pressure" for 2" pipe (280psi). There are just too many variables to consider to

give a real world number. The fact of the matter is, on a pressurized system, the pump will dictate the flow and pressure as much as the pipe used. To achieve the flow figures in the peak column, it"s assuming there are no bends and a

short straight flow path. If your system has bends and T"s, Wyes, etc, you should go to a larger pipe to achieve the flow desired. Also feed pressure effects the system. If the feed pressure is too low, you can get cavitation and you"ll

Flow iron pup joints from Cameron deliver maximum total life cycle cost savings, even in the oil and gas industry’s most demanding applications. For all of your flow iron requirements, from high-stage-count hydraulic fracturing to cementing, well testing, and even abrasive flowback, you can count on Cameron for high reliability and low cost.