anson pup joint in stock

Pup joint is kind of pipe without non-standard length to adjust the length of tubular strings to its exact requirement. API casing and tubing pup joint are produced according to API SPEC 5CT standard. Beyond the standard of oil casing pipe is called pup joint, the main oil casing pup joint material: J55, K55, N80, L80, C90, T95 and P110. Anson steel is a professional pup joint manufacturers in the steel line with good reputation.

Pup joints are non-standard lengths of piping applied to adjust the height of full length casing, tubing, line pipe, drill pipe or casing strings, for instance, in the acidic operating environment in the high pressure discharge line, input line, a temporary flow line, well testing and other high voltage transmission line on oil and natural gas pipelines. Meanwhile API pup joint is also cementing and fracturing equipment delivery high pressure fluid control products.

Pup joint is made of high strength steel, with a special toughening process. It uses Acme threaded connection, making it with the demolition convenient, fast, reliable connection, and reliable. Multiple seal design and high precision, to ensure the sealing performance of Pup joint.

Anson Steel manufactures all range of tubing pup joint and casing pup joint as per API specifications in all groups for casings and tubing. All of our pup joints meet the American Petroleum Institute (API) Specifications 5CT. The tubing and casing pup joints are subjected to be phosphated to prevent rusting and coated on thread by VCI oil. The range of couplings extends from 2 3/8" to 20", under grades H-40, J-55, K-55, L-80, N-80, C90, T95, P-110, Q125 etc.

The high pressure pup joint is forged by high quality structural alloy steel. Terminal union is forged together with pipe, which is able to avoid disassembling and ensure good sealing, small weight, convenient use and fast installation. Except for integral pup joints, Anson steel is also supplying pressure thread sealing pup joint, non-pressure thread sealing pup joint and welding pup joint. Therefore, we have enough stock in different types and sizes to meet customers’ different requirements. Choose a good pup joints supplier, choose a best start for your business! Henan Anson Steel is your trustable supplier and manufacturer in the international trade.

ANSON API.6A ‘Top Entry’ Check Valves are manufactured to a high specification from closed die forged steel bodies with 17/4 ph stainless steel internals.

ANSON API.6A ‘Top Entry’ Check Valves are manufactured to a high specification from closed die forged steel bodies with 17/4 ph stainless steel internals.

Pup Joints are used interconnecting pipe work between major equipment. PYZS offers the industry"s wide range of pup joints including forged integral, welded, threaded and NPST styles. All Anson brand pup joints are available for standard or sour gas service.

Pup joint is kind of pipe without non-standard length to adjust the length of tubular strings to its exact requirement. API casing and tubing pup joint are produced according to API SPEC 5CT standard. Beyond the standard of oil casing pipe is called pup joint, the main oil casing pup joint material: J55, K55, N80, L80, C90, T95 and P110. Anson steel is a professional pup joint manufacturers in the steel line with good reputation.

Grade:J55/K55/N80/L80/P110/C95OD of Tubing Joint:From 2-3/8"(60.3mm) to 4.5"(114.60mm);Pipe end:EUE/NUEOD of Casing Joint:From 4-1/2"(114.3mm) to 20"(508mm);Threads:BTC, LTC, STC.Length:2,3,4,6,8,10 12 ft (with other lengths available upon request)Surface treatment:coatingPacking:according to customer specific requirements, or by wooden case or wooden pallet

Stewart Tubular Products will manufacture Pup Joints to any length – inch or metric. Typical lengths are 2’, 4’, 6’, 8’ and 10’. Either API or proprietary threaded connections may be provided. Pup Joints manufactured by Stewart Tubular Products are available in all API and proprietary grades of steel, stainless steel and CRA steel.

Соединения Integral Pup Joints выкованы из высококачественной легированной стали с использованием передовых технологий плавления металлов и термообработки. Изготовлены и испытаны в соответствии с API 16C, APIQ1 и NACE 0175, доступны как прямые трубы с резьбовым уплотнением под давлением, так и безнапорные резьбовые соединения.

The Longlife swivel joint is a long radius journal bearing design that increases the swivel design life and greatly reduces maintenance time. The swivel elbows are a forged one-piece construction, fully heat treated and subject to a full MPI inspection to ASTM E709.

ANSON elbows provide a 45 or 90 degree bend option for customers. For portable flowline, the most common end configuration is male x female hammer union connection. Elbow construction can either be forged or welded. Manifold elbows are also available in long sweep, full flow, and block configurations with butt weld ends.

ANSON steel cementing and circulating hoses incorporate the unique NOV ANSON Longlife swivel joint suitable for use up to 15,000 psi working pressure or code silver threaded swivel joints for use up to 6,000 psi working pressure. Hoses can be supplied in standard service or sour gas trim with fully traceable material certification.

ANSON fittings encompass over 2,500 designs that include union ended tees, laterals, wye’s, goat heads, crowsfoot, union crossovers, hub crossovers, and flange crossovers. Also available are ANSON full flow and block manifold fittings: elbows (long sweep, double back, and block), tees and crosses (long sweep, full flow, and block), laterals, and goosenecks. Most fittings are manufactured from closed die forgings offering high material integrity.

Mission offers the industry’s most extensive range of pup joints, including forged integral, welded, threaded, and NPST styles. All ANSON pup joints are available for standard or sour gas service (NACE MR-01-75/ISO 15156) and are supplied with full material traceability and certification.

ANSON hammer lug unions are available in hydrogen sulphide trim (Sour Gas, H2S) with either threaded or butt weld ends. Sour gas unions are manufactured in accordance with NACE Standard MR-01-75 (Latest Revision). All unions are subjected to rigorous inspection checks throughout manufacture. Sour gas unions have their batch numbers prefixed by letters S G and, for ease of identification, are painted olive green.

ANSON hammer lug unions are available in all Fig. numbers as butt weld unions as an alternative to the Standard API threaded end. The only exception to this being the Fig. 50 which is available as socket weld only. When ordering butt weld unions please state the pipe schedule required.

ANSON lip and ‘O’ ring type seals are available for standard service in nitrile and for sour gas service in fluoroelastomer. Manufacture is closely monitored to guarantee the correct shore hardness and composition.

ANSON flowheads offer compact design resulting in reduced overall size and weight therefore increasing ease of operation. All valve seat pockets can be CRA625 inlaid to offer increased service life. The flowheads can be supplied complete with a string swivel if required. ANSON string swivels allow rotation around the string and eliminate torque transfer. They are complete with locking keys to prevent string thread back-out. Excessive testing including high temperature cyclic and slurry testing is carried out for ANSON swivels.

ANSON flowheads are available with working pressures from 2,000 psi through to 15,000 psi, temperatures from -75 ̊F (-59.4 ̊C) to 400 ̊F (204.4 ̊C) and sizes up to 9” API. All API 6A material classes are available in product specification levels (PSL 1, 2, 3 an 4).

NOV Mission provides a wide range of ANSON Swivel Joints including the patented ‘Longlife’ Long radius, short radius, threaded, Larger Quadrace, and Code Silver Swivel Joints for sizes up to 8″.

NOV Mission offers a large range of ANSON extra high pressure API Plug Valves. Available from 1” to 4” full bore for pressures up to 15,000 psi and in some instances 20,000 psi.

NOV Mission provides a complete range of ANSON cementing and circulating hoses which incorporate the unique ANSON ‘Longlife’ Swivel Joint suitable for use up to 15,000 psi cold working pressure.

The NOV Mission line of ANSON Relief Valve is available in 2” & 3″ sizes, up to 15,000 psi working pressure for Standard Service or 10,000 psi working pressure for Sour Gas Service.

NOV manufactures four types of ANSON Check Valves that suit many applications from valves suitable for temporary flowlines to valves suitable for in-line maintenance in fixed applications.