anson pup joint brands

Pup joint is kind of pipe without non-standard length to adjust the length of tubular strings to its exact requirement. API casing and tubing pup joint are produced according to API SPEC 5CT standard. Beyond the standard of oil casing pipe is called pup joint, the main oil casing pup joint material: J55, K55, N80, L80, C90, T95 and P110. Anson steel is a professional pup joint manufacturers in the steel line with good reputation.

ANSON API.6A ‘Top Entry’ Check Valves are manufactured to a high specification from closed die forged steel bodies with 17/4 ph stainless steel internals.

ANSON API.6A ‘Top Entry’ Check Valves are manufactured to a high specification from closed die forged steel bodies with 17/4 ph stainless steel internals.

Pup Joints are used interconnecting pipe work between major equipment. PYZS offers the industry"s wide range of pup joints including forged integral, welded, threaded and NPST styles. All Anson brand pup joints are available for standard or sour gas service.

Pup joint is kind of pipe without non-standard length to adjust the length of tubular strings to its exact requirement. API casing and tubing pup joint are produced according to API SPEC 5CT standard. Beyond the standard of oil casing pipe is called pup joint, the main oil casing pup joint material: J55, K55, N80, L80, C90, T95 and P110. Anson steel is a professional pup joint manufacturers in the steel line with good reputation.

FMC Technologies’ new lightweight pup joints with integral Weco® wing union end connections enable faster, easier make-up and break-out of temporary flowlines than ever before. Available in lengths up to 12 feet, these alloy-steel pup joints efficiently handle a complete range of well servicing fluids at cold working pressures up to 15,000 psi. FMC Technologies’ pup joints are also available for sour gas services at working pressures up to 10,000 psi.

The Longlife swivel joint is a long radius journal bearing design that increases the swivel design life and greatly reduces maintenance time. The swivel elbows are a forged one-piece construction, fully heat treated and subject to a full MPI inspection to ASTM E709.

ANSON elbows provide a 45 or 90 degree bend option for customers. For portable flowline, the most common end configuration is male x female hammer union connection. Elbow construction can either be forged or welded. Manifold elbows are also available in long sweep, full flow, and block configurations with butt weld ends.

ANSON steel cementing and circulating hoses incorporate the unique NOV ANSON Longlife swivel joint suitable for use up to 15,000 psi working pressure or code silver threaded swivel joints for use up to 6,000 psi working pressure. Hoses can be supplied in standard service or sour gas trim with fully traceable material certification.

ANSON fittings encompass over 2,500 designs that include union ended tees, laterals, wye’s, goat heads, crowsfoot, union crossovers, hub crossovers, and flange crossovers. Also available are ANSON full flow and block manifold fittings: elbows (long sweep, double back, and block), tees and crosses (long sweep, full flow, and block), laterals, and goosenecks. Most fittings are manufactured from closed die forgings offering high material integrity.

Mission offers the industry’s most extensive range of pup joints, including forged integral, welded, threaded, and NPST styles. All ANSON pup joints are available for standard or sour gas service (NACE MR-01-75/ISO 15156) and are supplied with full material traceability and certification.

ANSON hammer lug unions are available in hydrogen sulphide trim (Sour Gas, H2S) with either threaded or butt weld ends. Sour gas unions are manufactured in accordance with NACE Standard MR-01-75 (Latest Revision). All unions are subjected to rigorous inspection checks throughout manufacture. Sour gas unions have their batch numbers prefixed by letters S G and, for ease of identification, are painted olive green.

ANSON hammer lug unions are available in all Fig. numbers as butt weld unions as an alternative to the Standard API threaded end. The only exception to this being the Fig. 50 which is available as socket weld only. When ordering butt weld unions please state the pipe schedule required.

ANSON lip and ‘O’ ring type seals are available for standard service in nitrile and for sour gas service in fluoroelastomer. Manufacture is closely monitored to guarantee the correct shore hardness and composition.

ANSON flowheads offer compact design resulting in reduced overall size and weight therefore increasing ease of operation. All valve seat pockets can be CRA625 inlaid to offer increased service life. The flowheads can be supplied complete with a string swivel if required. ANSON string swivels allow rotation around the string and eliminate torque transfer. They are complete with locking keys to prevent string thread back-out. Excessive testing including high temperature cyclic and slurry testing is carried out for ANSON swivels.

ANSON flowheads are available with working pressures from 2,000 psi through to 15,000 psi, temperatures from -75 ̊F (-59.4 ̊C) to 400 ̊F (204.4 ̊C) and sizes up to 9” API. All API 6A material classes are available in product specification levels (PSL 1, 2, 3 an 4).

Pup joint is kind of pipe without non-standard length to adjust the length of tubular strings to its exact requirement. API casing and tubing pup joint are produced according to API SPEC 5CT standard. Beyond the standard of oil casing pipe is called pup joint, the main oil casing pup joint material: J55, K55, N80, L80, C90, T95 and P110. Anson steel is a professional pup joint manufacturers in the steel line with good reputation.

Grade:J55/K55/N80/L80/P110/C95OD of Tubing Joint:From 2-3/8"(60.3mm) to 4.5"(114.60mm);Pipe end:EUE/NUEOD of Casing Joint:From 4-1/2"(114.3mm) to 20"(508mm);Threads:BTC, LTC, STC.Length:2,3,4,6,8,10 12 ft (with other lengths available upon request)Surface treatment:coatingPacking:according to customer specific requirements, or by wooden case or wooden pallet

Manufacturer of pressure, rig concept, well intervention, drilling, down-hole and tubular products. Pressure products include centering shear and fixed bore pipe rams, blowout preventers, diverter systems, connectors, check and gate valves, chokes, actuators, flow heads, manifolds, catchers, packers, hydrate seals, casing heads, casing and tubing head spools, adapters, and hangers. Rig concept products include rig packages, derricks, masts, and skidding systems. Drilling products include electric and hydraulic top drives, makeup/breakout units, pipe handling units, cabins, operation stations, chairs, automatic drillers, anti-collision systems, and navigators, and draw works. Down-hole products include coiled tubing orienteers, drilling motors and jars, and survey and shock tools. Tabular products include drill pipe connections, collars, Kelly’s, subs and pup joints, and pipes.