anson pup joint pricelist

ANSON API.6A ‘Top Entry’ Check Valves are manufactured to a high specification from closed die forged steel bodies with 17/4 ph stainless steel internals.

ANSON API.6A ‘Top Entry’ Check Valves are manufactured to a high specification from closed die forged steel bodies with 17/4 ph stainless steel internals.

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Pup joint is kind of pipe without non-standard length to adjust the length of tubular strings to its exact requirement. API casing and tubing pup joint are produced according to API SPEC 5CT standard. Beyond the standard of oil casing pipe is called pup joint, the main oil casing pup joint material: J55, K55, N80, L80, C90, T95 and P110. Anson steel is a professional pup joint manufacturers in the steel line with good reputation.

A pup joint is a casing or tubing of length shorter than Range 1 with the same thread connection, used to adjust the length of tubular strings to its exact requirement.

Pup Joints are manufactured from AISI 4145H or 4140H-modified alloy, heat-treated to a Brinell Hardness range of 285-341 with a Charpy “V” notch minimum impact strength of 40 ft/lb at 70° F and one inch below the surface. Pup Joints are heat-treated to 110,000 PSI minimum yield. All connections are phosphate coated to impede galling during initial make-up.

Integral Pup Joints dedicated to Sour Service applications are available. PJ -110 PUP S are Sour Service Pup Joint using ASCOWELL C material providing improved resistance to Sulfide Stress Cracking with high yield strength.

Pup Joint Inc. is a machine shop that sells down hole tubular and casing accessories and equipment. We are a leading supplier of pup joints & accessories with API5CT & premium threads at very competitive prices. Our machine shop is a threading facility for all your threading & precision machining needs. PJI commenced operations in Houma, LA in July of 1997. Our staff has over 65 years of combined experience supplying quality products & services to the oil & gas industry.

NOV Mission provides a wide range of ANSON Swivel Joints including the patented ‘Longlife’ Long radius, short radius, threaded, Larger Quadrace, and Code Silver Swivel Joints for sizes up to 8″.

NOV Mission offers a large range of ANSON extra high pressure API Plug Valves. Available from 1” to 4” full bore for pressures up to 15,000 psi and in some instances 20,000 psi.

NOV Mission provides a complete range of ANSON cementing and circulating hoses which incorporate the unique ANSON ‘Longlife’ Swivel Joint suitable for use up to 15,000 psi cold working pressure.

The NOV Mission line of ANSON Relief Valve is available in 2” & 3″ sizes, up to 15,000 psi working pressure for Standard Service or 10,000 psi working pressure for Sour Gas Service.

NOV manufactures four types of ANSON Check Valves that suit many applications from valves suitable for temporary flowlines to valves suitable for in-line maintenance in fixed applications.

Following a visit to the Great Exhibition in London with his father in 1851, Knowles enrolled at the newly opened School of Design in York. He continued there as a pupil until 1854, winning prizes for his stained glass work in 1852 and 1854. In around 1858, Knowles moved to London for a year to work for Heaton and Butler, where he developed an interest in photography and architecture.