api 5ct manual pup joint manufacturer

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

PUP JOINTS are a joint of pipe of non-standard length used to adjust the length of tubular strings to exact requirement. We provide both tubing (2 3/8” to 4”) and casing (4” to 13 3/8”) in all lengths. With our myriad of licenses (quality page) we are able to cut to length, thread and couple to meet specified needs. API casing and tubing pup joints are manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Premium pup joints are also available with premium connections and in API or exotic alloy grades.

MARKER JOINTS are a joint of tubing used in a workover or completion tubing string that serves as a position or depth indicator. In most cases, a marker joint is significantly shorter than other joints in the string so that it is easily noticeable.

or BTC, length of tubing pup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length of pup joint for special purpose can be available as per order.

Pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of tubing pup joint is the same as tubing, and casing pup joint is the same as casing.

and phosphated and dye-penetrant inspected. and finally painted by machine to ensure excellenct appearance. Finished tubing pup joints are often packed by steel belts in bundles, and then fixed in steel rack for easy transportation.

or BTC, length of tubing pup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length of pup joint for special purpose can be available as per order. Casing pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of casing pup joint is the same as casing. Casing pup joints are

We are the largest manufacturer of API pup joints in North America. All of our pup joints are manufactured from the highest quality API seamless tubing, and per API 5CT requirements. We have dedicated heat treat, NDT, and automated threading lines to provide you with best quality pup joints with quicker turnaround times.

Tejas Tubular de Mexio is committed to maintaining high quality products. In order to honor this commitment we have developed a quality assurance manual that describes our quality management system and how it conforms to the requirements of the American Petroleum Institute (API) Spec Q1. The API Specification Q1 outlines the requirements for the consistent and reliable production of parts manufactured in accordance with API specifications. An API license and authorization to monogram is issued only after a quality assurance manual has been submitted and approved and an onsite audit by an API representative has confirmed that the applicant adheres to the requirements of both Q1 and the appropriate API product specifications. Specification Q1 is consistent with the requirements of ISO 9000. While it is necessary to have a valid API license certificate to apply the API monogram, a manufacturer can produce products which meet API requirements without the license and mark the product only with the specification designation, for example �5CT� for casing or tubing. However many users require the use of the API monogram to insure that API is auditing the manufacturer on a regular basis.

The American Petroleum Institute has granted Tejas Tubular de Mexico the right to use the Official API Monogram� on manufactured products under the conditions in the official publications of the America Petroleum Institute entitled API Q1� and API Spec 5CT, API Spec 5L, API Spec 5DP and API Spec 7-1.

Pup joint is kind of pipe without non-standard length to adjust the length of tubular strings to its exact requirement. API casing and tubing pup joint are produced according to API SPEC 5CT standard. Beyond the standard of oil casing pipe is called pup joint, the main oil casing pup joint material: J55, K55, N80, L80, C90, T95 and P110. Anson steel is a professional pup joint manufacturers in the steel line with good reputation.

  Casing or Tubing Pup Joints at Group 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1;  Manufacture Accessories at Group 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1;  Threader.

  Casing or Tubing Pup Joints at Group 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1;  Manufacture Accessories at Group 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1;  Threader.

API Spec 5CT Licensing Information Form, Product Removal, Changes and Additions under the API Monogram ProgramPlease be advised that the API Spec 5CT Licensing Information Form has been updated with changes that include product removal, product gradechanges, and product naming changes.Changes to the API Spec 5CT Licensing Information Form include:• • Group selections 1, 2, 3 and 4 have been removed

• • Product “Threader” is now product “Pipe Threader” 1-1. Licensees can transition to a registration under API Spec Q1. Facilities interested in the transition to API Spec Q1 certification shall apply prior to July 1, 2019. Applications can be submitted through the myCerts system (mycerts.api.org).

Alibaba.com offers 206 api casing tool joints products. About 49% % of these are mining machine parts, 1%% are other oil field equipments, and 1%% are seamless steel pipes.

A wide variety of api casing tool joints options are available to you, such as energy & mining, construction works  and manufacturing plant.You can also choose from unavailable, 1.5 years and 4 years api casing tool joints,As well as from provided, {2}, and {3}. and whether api casing tool joints is kazakhstan, russia, or egypt.