<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

Drill pipe joint is an important connecting component of petroleum drilling pipe drill, which is widely used in oil drilling industry. The market demand is big, has broad prospects for development, Goldenman company with its unique perspective, to create a modern international joint industry as the goal, take on the hard road of entrepreneurship. In the increasingly competitive market economy situation, the courage to struggle and thrive.

<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

Lift Plugs are small easy-to-handle subs that make up to the top of the drill collars. They have a lifting flange that serves as a safety stop when drill collars without elevator recesses are being tripped out of the hole. The center section of the Lift Plugs are bored out to reduce weight for easy handling.

Lift Subs enable the safe, efficient handling of straight OD tubulars such as drill collars, shock tools, jars, directional equipment and other tools by using the drill pipe elevators.

AOS pup joints are machined from integral bars of chromium molybdenum alloy steel heat treated to drill collar specifications. Pup joints with tool joint OD less than 6 7/8” have a minimum yield strength of 110,000 psi. Pup joints with tool joint OD 6 7/8”and larger have a minimum yield strength of 100,000 psi.

Pup joints are available in 5’, 10’, 15’ and 20’ lengths and can be ordered to match standard drill pipe dimensions. The primary use of the pup joints is to adjust the overall length of the drill string to land at a specific depth while staying within the working area of the Kelly.

<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

4” PUP JOINTPUP JOINT 4″ WITH NC40 (4 ” FH) CONNECTION, LENGTH 5 FEET, TOOL JOINT 5-3/8” OD X 2-7/16” ID, WITH TC2000 PLASTIC INTERNAL COATING C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINT 4″ WITH NC40 (4 ” FH) CONNECTION, LENGTH 10 FEET, TOOL JOINT 5-3/8” OD X 2-7/16” ID, WITH TC2000 PLASTIC INTERNAL COATING C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINT 4″ WITH NC40 (4 ” FH) CONNECTION, LENGTH 15 FEET, TOOL JOINT 5-3/8” OD X 2-7/16” ID, WITH TC2000 PLASTIC INTERNAL COATING C/W PRESS STEEL PROTECTORS ON BOTH ENDS

3 1/2″PUP JIONTPUP JOINT 3 1/2″ WITH NC38 ( 3-1/2″ IF) CONNECTION, LENGTH 5 FEET, TOOL JOINT 5” OD X 2-7/16” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

3 1/2″PUP JIONTPUP JOINT 3 1/2″ WITH NC38 ( 3-1/2″ IF) CONNECTION, LENGTH 15 FEET, TOOL JOINT 5” OD X 2-1/8” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

2 7/8″ G-105 PUP JIONTPUP JOINT 2 7/16″ WITH NC31 ( 2-7/8″ IF) CONNECTION, LENGTH 5 FEET, TOOL JOINT 4 1/8” OD X 2” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

2 7/8″ S-135 PUP JIONTS-135 PUP JOINT 2 7/8″ WITH NC31 ( 2-7/8″ IF) CONNECTION, LENGTH 5 FEET, TOOL JOINT 4 3/8” OD X 2” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINTPUP JOINT 3 1/2″ WITH NC38 ( 3-1/2″ IF) CONNECTION, LENGTH 5′,10′ 15’FEET(ONE EACH), TOOL JOINT 5” OD X 2-7/16” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS;

PUP JOINT 2 3/8″ WITH NC26 ( 2-3/8″ IF) CONNECTION, LENGTH 5′,10′ 15’FEET(ONE EACH), TOOL JOINT 3 3/8” OD X 1-3/4” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINTS 3 ½”ODPUP JOINTS 3 ½”OD, 15.5 LB/FT, GRADEG105SS, NEW AND UNUSED,4 1/8”TOOLJOINTS (120 KSI) AND NC31 CONNECTION     5’LONG; FOR ABOVE PIPES

PUP JOINTS 2 7/8 ”ODPUP JOINTS 2 7/8 ”OD, 10.4  LB/FT, GRADEG105SS, NEW AND UNUSED,3 1/8”TOOLJOINTS (120 KSI) AND NC31 CONNECTION     5’   LONG; FOR ABOVE PIPES

<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

It is a short drill pipe used to adjust the overall length of drill string. The surface of Drill Pipe Pup joint looks like a smaller version of joint of drill pipe.

The minimum yield strength of Drill Pipe Pup Joint is 120000 PSI, just like the Tool Joint of the Drill Pipe. We manufacture Drill Pipe Pup Joints of all sizes, grades, and thread profiles to meet any custom requirements.

All our products have passed the ISO certification and API certifications.We have become the reliable exporter of Drill Pipe Pup Joint in India. Our products are tested numerous times under technical guidance and are made from best quality material.

<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

PUP JOINTS are a joint of pipe of non-standard length used to adjust the length of tubular strings to exact requirement. We provide both tubing (2 3/8” to 4”) and casing (4” to 13 3/8”) in all lengths. With our myriad of licenses (quality page) we are able to cut to length, thread and couple to meet specified needs. API casing and tubing pup joints are manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Premium pup joints are also available with premium connections and in API or exotic alloy grades.

MARKER JOINTS are a joint of tubing used in a workover or completion tubing string that serves as a position or depth indicator. In most cases, a marker joint is significantly shorter than other joints in the string so that it is easily noticeable.

<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

If you are looking for the macaroni tubing, we can help. We can provide you pipe products and services anywhere in the United States and Canada. All our pipe products, including macaroni tubing, undergo testing and inspection, ensuring they meet or exceed the performance expectations.

We are strategically located all across the United States and Canada. We can deliver your specific pipe product requirements or you can arrange for pick-up. Our complete range of pipe products is compliant with the API standards. Our products pass through stringent inspection of third parties before being delivered to you. Contact us today to get a competitive quote for any of your pipe product or macaroni specifications.

<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

The primary use of the pup joint is to adjust the overall length of the drill string to land at a specific depth while staying within the working area of the Kelly.

Command Tubular pup joints are manufactured from the highest quality API seamless tubing, per API specifications 5CT latest edition and are machined from integral bars of chromium molybdenum alloy steel. Pup joints with tool joint OD less than

6 7/8” have minimum yield strength of 110,000 psi. Pup joints with tool joint OD less than 6 7/8” or larger have minimum yield strength of 100,000 psi. Our pup joints are available from 2 feet to 25 feet in lengths however, standard lengths are 5, 10, 15 and 20 feet. Additional sizes are available upon request and can be ordered to match standard drill pipe dimensions.

<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

Besides casing and tubing, it also includes pup joints, coupling stock, coupling material, and accessory materials, and establishes requirements for three product specification levels (PSL-1, PSL-2, and PSL-3). The requirements for PSL-1 are the basis of this standard.

According to API 5CT standard, steel material used for making the pipe billet supplied shall be grain refining treatment. This steel shall contain one or more grain refining elements, such as a certain amount of aluminum, niobium, vanadium or titanium, so that the austenite grains of the steel Grain refinement.

A separately heat treated coupling blank is acceptable. If the finishing temperature is higher than the upper critical temperature of the treated steel and the pipe is air cooled, it shall be considered to be normalized.

C90 and T95 products can be cold-rotated straightened, but the pipe must be heated to a minimum temperature of 480 ℃(1000°F) degrees for stress relief after straightening. If necessary, light gag straightening for steel grade C90 and T95 products are allowed.

The product shall meet the tensile performance requirements specified in this standard. The tensile properties of the upset casing and tubing (except for elongation) shall be consistent with the requirements of the pipe body. In case of dispute, the properties of the upset area (except for the elongation) shall be determined by cutting the specimen from the upset.

In the dimensional table of this standard, the pipe is named with the labels and sizes (outer diameter). The outer diameter of external upset pipe refers to the outer diameter of the pipe body, not the outer diameter of upset portion.

The pipe shall be supplied in accordance with the sizes, wall thickness and tolerance masses specified on the order. Other plain end pipe sizes and wall thicknesses are available upon purchase and manufacturer agreement. Coupling stock, coupling materials and accessory materials shall be supplied in the required size of the order, or the size of the coupling material shall be as specified in the manufacturer’s internal requirements.

Following tolerances apply to the outside diameter of the pipe body immediately behind the upset for a distance of approximately 127 mm (5.0 in) for sizes Label 1: 5-1/2 and smaller, and a distance approximately equal to the outside diameter for sizes larger than Label 1: 5-1/2. Measurements shall be made with callipers or snap gauges.

Flat end pipe is a pipe supplied with unmachined threads, and It may upset or not , but it shall comply with all requirements of a specific steel grade in this standard.

The “round” or “bullet-nose” type of pipe end may be provided by the manufacturer or specified by the purchaser to replace the conventional corner breaks on the threaded ends of external upset tubing. The improved end should be rounded so that the coating is applied and the inner and outer surfaces are rounded and smooth, without sharp corners, burrs.

<a href='https://www.ruidapetroleum.com/product/category/Drill-Pipe'>drill pipe</a> pup joint dimensions quotation

Pup joints are manufactured from AISI 4145H or 4140H-modified alloy, heat-treated to a Brinell Hardness range of 285-341 with a Charpy “V” notch minimum impact strength of 40 ft/lb at 70° F and one inch below the surface. Pup joints are heat-treated to 110,000 psi minimum yield. All connections are phos-coated to impede galling during initial make-up. They are available in standard lengths of 5′, 10′, 15′ and 20′ with other configurations upon request.

Pup joints are commonly used to adjust the length of the drill string to the elevation of rotary table for easy surface handling and drilling practices. They undergo the same stresses as drill pipe and their performance depends primarily on their superior mechanical properties.