eue pup joint for sale

These J55, L80, N80Q & P110 pup joints are manufactured from seamless Grade J-55, L80 N80Q and P110 mechanical tubing. The API 5CT tubing pup joint is mainly used to adjust the height of the tubing strings. It is also used to adjust the depth of down-hole tools.

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Pipe system involves various components, including eue pup joint and are made from different materials. We offer wholesale eue pup joint to create a smooth channel for the pipe systems in both commercial and residential areas.

Pipe system involves various components, including 2 7 8 eue pup joint and are made from different materials. We offer wholesale 2 7 8 eue pup joint to create a smooth channel for the pipe systems in both commercial and residential areas.

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

8. Our tubing pup joint conform to API 5 CT standards, Length: 2FT/3FT/4FT/5FT/6FT/8FT/10FT/12FT and we can make different lengths and sizes according to the customer"s requests.

Now, Our Pup Joints have exported to USA, Egypt, India and UEA , etc with high quality and short supply and good service. Ourcouplings has got good reputation home and abroad Here we got some prise as follows.

Our TUBING PUP JOINT cover all API Standard scope from 2-3/8" - 4-1/2" with strickly inspection, which all the goods should be checked one by one before packing. Euipped withthe world-class facilities and professional laboratory technicians, we pay more attention the quality of every products.

We are the largest manufacturer of API pup joints in North America. All of our pup joints are manufactured from the highest quality API seamless tubing, and per API 5CT requirements. We have dedicated heat treat, NDT, and automated threading lines to provide you with best quality pup joints with quicker turnaround times.

Pup joints can be ordered individually or in sets. Having sets on location gives the operator the flexibility of adjusting location depths of downhole assemblies, such as spacing out tubing hanger when landing productions seals.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Crossover pup joints are manufactured from seamless mechanical tube. As with all Crossover products, each piece is marked with a distinctive job number and heat number that is fully traceable. A complete range of sizes (1" to 4.5"), weights (standard or heavy wall), and grades (J-55, N-80, L-80, and P-110) are commonly available from stock in 2", 3", 4", 6", 10", and 12" lengths. Lengths up to 20" are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

A blast joint is shorter in length than standard tubular joint. Built with a heavy wall pipe it is incorporated in the production string to facilitate production across any perforated interval and zone. Blast Joints are manufactured to the following specs connections, lengths, weights and material grade.

Crossover Blast Joints are heavy wall pin by box connectors used in tubing strings and are designed to minimize the effect of external erosive action caused by production fluids. Blast joints are located opposite the location of perforations in the production casing or just below the tubing hanger in sand frac designs. Crossover blast joints are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2” OD. Any length, grade of material, and threading is available at the customers request. Typical lengths are 10" and 20". Both API and Premium threads are available.

Crossover Coarse Thread Tubing Safety Joint provides for emergency recovery of the major portion of the tubing string should it become necessary to abandon the equipment below. Precision left-hand threads facilitate the release of the joint by right-hand tubing rotation. Equipment requiring right-hand rotation should not be used below the Safety joint.

Crossover Straight-Pull/Shear-Out Safety Joint is used between packers in dual and triple completions and in selective completions using Hydrostatic Single-String Packers. It is also used when rotational releasing is not desired. When ran above the upper packer in a single-string completion, however, the shear value should be adjusted to compensate for any hydraulic conditions that exist when the string is landed, or that are created by well treating operations. They are available in keyed and non-keyed configurations.

Crossover rotary shoes are manufactured from specially tempered steel to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore. Each shoe is tailored to fit a particular downhole need and normally is run on the bottom of one or more joints of washover pipe. Shoe design is dictated by whether it cuts on the bottom, on the OD, on the ID, or any combination of these. When hole sizes permit, additional clearances can be cut using side ribs, thus providing greater circulation.

AnEUE Tubing Pup Joint For sale with galvanized galvanized, including oil suction pipe, short pipe and downhole pipe, an on-off valve is rotatably connected to the middle position of the short pipe, and an outer ring is fixedly connected to the internal measurement of the on-off valve, The upper end of the outer ring is fixedly connected with a fixing plate, the lower end of the outer ring is provided with an opening and closing rod, the outer end of the opening and closing rod is rotatably connected between the rotating shaft and the outer ring, and the inner end of the opening and closing rod is connected with the outer ring. A closing blade is provided, a connecting frame is fixedly connected to the inside of the short tube, the fixing plate and the connecting frame are slidably connected, the lower end of the connecting frame is fixedly connected with an inner ring, and the closing blade and the inner ring are fixedly connected with each other. Turn the connection.

We provide pup joints in several sizes, grades, and thread profiles. These pup joints are used as interconnecting pipework between equipment and adjust the length of tubular strings to its exact requirement. They are used to reach an exact reservoir depth, for setting packers at an exact location within the borehole, to space out your string prior to hanging it and more.

At W74 Oil Tools, our pup joints meet all certifications and specifications. Due to their shorter length, they are easier to handle and to use while out on in the field. In addition to their durability and quality, our oilfield pup joints also provide the same performance as the tubing, casing, or drill pipe that they’re attached to. To learn more about our selection of pup joints or to discuss your project needs, please feel free to contact our team today! We proudly serve and support oilfield sites across the Odessa, Midland, and Houston, TX area.

Tianjin Dalipu Oil Country Tubular Goods Co., Ltd Main products： Tubing\Casing\Pup Joint\Coupling\Crossover\Thread processing Material:J55/K55/N80-1/N80Q/L80/P110/C90/T95/Q125/80S/80SS/90S/90SS/L80-3Cr/L80-9Cr/L80-13Cr Thread Type:EUE,NUE,LTC,STC,BTC,IF,REG,High gas seal processing. Certificate：API 5CT,ISO9001 Contact:harry E-mail:harry@dlpoctg.com