filter pup joint screen manufacturer

The Hunting Downhole Filter is a simple tool that is run above any debris intolerant tool to ensure full operability. This is particularly useful when cleanliness of circulating fluid is poor, unknown or whilst recirculating the same fluid.

Available in a variety of sizes, Drilling Tools" filter subs range from the retrievable and non-retrievable mud screens to the Diffuser™ blade technology sub assembly. See detailed information on

Pup joints are key components in special drilling operations when specific spacing considerations are required. Our pup joints can be ordered with an 18-degree taper or square shoulder and with pressed

Mer-made is a significant provider of standard & custom-made commercial pool filtration products. The company is headquartered in Denmark, South Carolina. With manufacturing facilities located throughout the United States. The company produced “the most cost-effective improvement in commercial sand filter systems, fiberglass pool & industrial pump strainers, vacuum diatomaceous earth (D.E) filters, float (modulating) valves and many more products available today.”

Mermade is the world leader in the design and development of commercial pool filtration systems and a major supplier of commercial sand filter systems, fiberglass pool and industrial pump strainers, level control (positive valves), reducers, segmented surge/balance tank, and custom fabrications. Mermade is noted for its innovative designs and the quality of its products.

Since 1985, Chemtrac Inc. has been a leading manufacturer of process monitoring and control instruments used in water, wastewater, and other industrial processes. However, the company’s reputation and growth have been built around one mission – “RESULTS for the customer”. This will never change. We understand that our success depends on meeting and exceeding our customer"s expectations. With defined objectives and joint commitments, we will achieve the results you want.

Manufacturer of pressure, rig concept, well intervention, drilling, down-hole and tubular products. Pressure products include centering shear and fixed bore pipe rams, blowout preventers, diverter systems, connectors, check and gate valves, chokes, actuators, flow heads, manifolds, catchers, packers, hydrate seals, casing heads, casing and tubing head spools, adapters, and hangers. Rig concept products include rig packages, derricks, masts, and skidding systems. Drilling products include electric and hydraulic top drives, makeup/breakout units, pipe handling units, cabins, operation stations, chairs, automatic drillers, anti-collision systems, and navigators, and draw works. Down-hole products include coiled tubing orienteers, drilling motors and jars, and survey and shock tools. Tabular products include drill pipe connections, collars, Kelly’s, subs and pup joints, and pipes.

Flow iron pup joints from Cameron deliver maximum total life cycle cost savings, even in the oil and gas industry’s most demanding applications. For all of your flow iron requirements, from high-stage-count hydraulic fracturing to cementing, well testing, and even abrasive flowback, you can count on Cameron for high reliability and low cost.

Filter screens are open yet protective barriers that are simple in design, but very effective in removing dirt, dust and other particles from any liquid. These screens take the idea of strainers or window screens and apply it to filtration systems of all kinds. The food and beverage manufacturing, petro-chemical, agricultural, water purifying, mining, pharmaceutical and oil industries use filter screens to purify and clean many different types of liquids, including irrigation water, potable water, oil, alcoholic beverages and juices.

One of the most common places to find a filter screen is in faucets. They are small, round pieces of woven wire mesh situated at the faucet opening to catch any debris and dirt that made it through the drinking water system. Filter screens are reusable, long lasting, and very resistant to a variety of temperatures and moisture. They won"t rust, unravel or wear out easily. If that does happen, filter screens are very inexpensive and easy to replace.

Filter screens are made of very fine metal wires, usually made of aluminum because of its light weight and high durability, or stainless steel because of its smooth, highly resistant finish. The wires themselves are manufactured through the drawing process, which forces a wire through a smaller die, thus decreasing its diameter. This may be done several times to achieve the ultra-thin measurements of filter screen wires. Sets of perpendicular wires are then woven together by interlacing with each other over and under in an even pattern. The result is a fine gauge, tight, durable wire cloth that lets water and liquid through but stops even the tiniest of particles.

After the weaving process, which produces the wire cloth in large sheets or rolls, it is galvanized to increase durability and rust resistance. During this process, the wire cloth is hot dipped in molten zinc, which causes the metal"s strength and resistance properties to enhance and strengthen. Once dry, the wire cloth will not oxidize if exposed to water for long periods of time. All filter screens must be routinely cleaned out. They are continuously used, and the particles and contaminants they stop tend to build up behind them.

The new Metraflex LPD Y-Strainer/Filter provides significant energy savings over the old Y-strainer. Metraflex has re-engineered the 100-year-old strainer and given it a leaner interior with fewer obstructions. The result is significantly lower pressure drops resulting in energy-savings so significant the LPD Y-strainer can pay for itself in months. View Utah Water Research Laboratory study.

Metraflex has removed the bridge wall/body casting structure that has traditionally diverted flow into the screen as it enters the strainer. Now flow takes a much straighter line from intake to discharge. Other internal structural improvements also help create a more open internal geometry, allowing for smoother flow throughout the strainer. The result is significantly lower pressure drops.

The new LPD Y-strainer internal design also accommodates a significantly larger screen, up to 30% larger. This larger screen has more holes allowing smoother fluid flow. In addition, as debris collects, the same amount of debris trapped by both the new LPD Y-strainer screen and a traditional, old Y-strainer screen covers a significantly smaller percentage of the new LPD Y-strainer screen. This contributes to lower pressure loss. It also takes longer for debris to collect and significantly impact strainer performance.

As an example, we compared a 6-inch LPD Y-strainer, with 50% of the screen clogged with debris, to a competitors completely clean 6-inch Y-strainer. The partially clogged LPD Y-strainer still has a lower pressure loss than the completely clean traditional Y strainer! View the pressure loss charts.