filter pup joint screen quotation

Manufacturer of pressure, rig concept, well intervention, drilling, down-hole and tubular products. Pressure products include centering shear and fixed bore pipe rams, blowout preventers, diverter systems, connectors, check and gate valves, chokes, actuators, flow heads, manifolds, catchers, packers, hydrate seals, casing heads, casing and tubing head spools, adapters, and hangers. Rig concept products include rig packages, derricks, masts, and skidding systems. Drilling products include electric and hydraulic top drives, makeup/breakout units, pipe handling units, cabins, operation stations, chairs, automatic drillers, anti-collision systems, and navigators, and draw works. Down-hole products include coiled tubing orienteers, drilling motors and jars, and survey and shock tools. Tabular products include drill pipe connections, collars, Kelly’s, subs and pup joints, and pipes.

All connections to filter use standard 2” slip PVC fittings, including; tees, ells, couplings, male or female threaded adapters, unions etc. This filter system provides you the most flexibility and cost effective means of assembling the filter design that meets your system requirements.

For nearly 30 years Septic Solutions has focused on quality and innovation with our wastewater products. Our septic tank effluent filters are perfect examples where innovation and quality come together. We offer gravity effluent filters that can handle anywhere from 800 GPD to 10,000 GPD and are available in 1/16"" and 1/32"" filtration, ensuring we have a septic filter for nearly every application.

The PL-68 is much more than just an effluent filter. The housing can also be used as an inlet baffle or an outlet baffle. The housing is designed to accept Polylok"s snap in gas deflector to deflect gas bubbles away from the tee and to keep the solids in the tank.

The Sim/Tech bristle filters offer superior filtration for tissue, hair, lint, and most common solids found in wastewater. The STF-110 bristle filter easily installs in any exsting 4"" pipe or baffle and its flexible design allows for easy maintenance!

The PL-122 was the original Polylok filter. It was the first septic tank filter on the market with an automatic shut-off ball installed with every filter. When the filter is removed for regular servicing, the ball will float up and prevent any solids from leaving the tank.

The exterior of the GF10 filter is a single piece case. It has no joints an no glue holding it together which gives it incredible strength. It is made of impact resistant plastic so it can withstand harsh treatment and will not break.

The PL-525 filter is rated for 10,000 GPD making it one of the largest filters in its class. It has 525 linear feet of 1/16"" filtration and includes the same automatic shut-off ball as the smaller PL-122. The PL-625 is ideal for grease trap applications with a filtration rating of 1/32"".

Sprinkler filters are a great way to protect your system from collecting unwanted debris over time. Our water filters are available with either stainless steel or polyester screens, and all filters feature clear covers which allow you to easily check the condition of the filters. Sprinkler Warehouse recommends installing a T-style filter. The Vu-Flow screen filters keep out sand and debris. The body is clear so you can instantly see when the filter needs purging or cleaning.

The type of sprinkler pump you purchase should depend on your irrigation needs. The best way to choose the correct pump size for your irrigation system is to read the pump curve, which is a performance chart provided by the pump manufacturer. A Pump’s curves are measured and shown in “head in feet”. However, since most people don’t know how to convert “head in feet” to PSI, many pump curves also measure by psi, as well. Do I need a filter on my sprinkler system?

Installing a pump filter for your irrigation system is important because the water going to your irrigation system is probably not as clean as you think. It is common for debris to go into your irrigation system and accumulate in valves, sprays, and emitters. This causes decreased performance and a steady increase in maintenance. It also costs you money in ways you might not expect. This is why it is important to install a filter to prevent the problem before it starts.

These units are used to protect submersible pumps in wells, lakes, ponds, tanks, excavations and other locations where sand and other foreign matter may clog pump impellers. Each unit consists of a 4" Sch. 40 slotted PVC well screen with a slip plug glued in one end and a high impact ABS well seal in the opposite end. The standard well seal is a PS4X1SS with stainless steel nuts, bolts and washers. This unit accommodates a 1" drop pipe and has a 1/2" vent tapping and a 3/4" cable hole. Other well seals available

"This is our first experience with an above ground pool, well any pool actually. I am female, 42 years old and I was able to completely assemble it on my own. I took my time and it took me about 6 hours. I have only owned the 18"x52" for about two weeks but this is my experience so far. It took about two weeks for the box to be delivered from the time I ordered it to being delivered. You have to be home when it is delivered and they could not give me a delivery window. They just called me 30 min before they arrived. One large box weighing about 277 lbs was dropped off in my driveway. Because it was so heavy I opened it up from my driveway and used the wheelbarrow to bring the contents around to my backyard. For site preparation I already had a pretty flat yard (level within two inches). I used roundup to kill the grass 19 feet in diameter. I used 2" foam insulation board as the base. I used weatherproof duct tape (in plumbing section of your local hardware store) to tape the seams together. I then used a jigsaw to cut a 18" diameter circle in the foam board. Now it was tie to start assembling the pool. I found I had to use a combination of watching youtube videos and reading the directions. Both on their own are confusing or incomplete but together was just enough info for me. I started putting the frame together. That part was super simple except for attaching the last upper circular supports. I started to panic that I was not strong enough to get the last one connected. Im not going to lie, I had to use me feet to push them apart far enough so they would connect together. This part could definitely use two people. So they pool is assembled and now it was time to assemble the pump/filter. This part I was really nervous about. I was worried about setting it up wrong and there would be leaks, or the motor would sound bad or water would start flooding everywhere. I actually put it together the correct way the first time and it worked perfectly. I bought an extra 2" hose for back washing that would take the water 50 ft away to a ditch on my property. Im glad I did this because my land is pretty flat and I cant just let water come out of the pump for backwashing right next to the pool. I do recommend buying a pool vacuum. I have no trees or anything near the pool but somehow bugs and stuff still gets in it. The pump keeps the water nice and clean but after two weeks I see some stuff that has settled on the bottom that I need to clean out. This is after running the pump daily for 8 hours (5 hours is recommended) and I skim debris off the top about every other day. I thought my electric bill would be really bad running the pump that long, but it isn"t bad at all. We have not been able to swim int he pool yet as the water temperature has only been as high as 70 degrees. So far, the temperature it is outside is the same temp the water is. Im wondering when it gets to be 99 degrees here in south carolina if the water will also be 99 degrees. At any rate, we cant wait to go swimming. I was worried this pool would be too small, but it is plenty big and so far we are very happy with it. "

New, 4-1/2” Standard, Welded, Range 2, RDT-USA Heavy Weight Drill Pipe, 6-1/4” OD x 2-13/16” ID x 24” Min Tool Joints, 18 Degree Taper, NC46 Connections, Boreback Box & Relief Groove Pin, Cold Rolled and Phosphated Threads, Kopr Kote Thread Compound, H…

New 5” 19.50# G105, I.E.U., R2, RDT-USA Drill Pipe 6-5/8” OD x 2-3/4” ID x 2” LTS Tool Joints, NC50 Connections, Kopr Kote Thread Compound, Plastic Thread Protectors, 95% Remaining Body Wall, 100% Inspected & Traceable..

PRODUCT TYPE..OD..INTEGRAL PUP JOINT..6.625 IN..CONNECTION..TOOL JOINT OD..XTMF 67..8.250 IN..TOOL JOINT ID..PUP JOINT LENGTH..5.250 IN..5.00 FT..PIN TONG..PIN TAPER..10.00 IN..35 DEGREE ANGLE..BOX TONG..BOX TAPER..15.00 IN..18 DEGREE ANGLE..HARDBAND L…