fmc weco pup joint in stock

Now there’s a new Lightweight Fittings family that is ideal for handling a complete range of well servicing fluids at cold working pressures to 20,000 psi. Available in 1- to 4-inch sizes, FMC fittings feature high-quality forged construction with integral Weco wing union end connections for a high-strength, high-integrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation. Like other FMC flowline products, FMC’s Integral Fittings come with full material traceability and can be supplied with Charpy impact values.

FMC Integral Fittings can be used in combination with FMC Plug Valves to create manifolds for choke-and-kill, well testing, squeeze, flow back, and cementing applications. Unlimited manifold designs using FMC’s advanced ULT and world proven DR Plug Valves can be easily constructed. Because FMC’s new line of integral fittings are lighter and smaller, you save valuable weight and space regardless of manifold design.

Fluid Control is the world"s leading supplier of flowline products to the oilfield industry and is the standard against which all others are measured. From its original Chiksan® and Weco® products to the revolutionary equipment designs and integrated services of today, the Fluid Control family of products and services help customers achieve maximum life and value from their flowline systems throughout a complete range of applications.

The success of FMC’s Fluid Control stems from a strong tradition of anticipating and responding to customer needs in every way possible. By focusing on the delivery of top products and services, Fluid Control is helping its customers face tomorrow’s technical and economic challenges today.

Mid-Continent is authorized by FMC Fluid Control Division to provide after sales testing and certification of mudline and cementing flow control products…

FMC Technologies offers the most complete line of fittings for pressure pumping, high-pressure drilling, and production applications, and a full line of forged fittings with Weco® wing union end connections for standard and sour gas service. All fittings are high quality forged construction with full traceability and can be supplied with charpy impact values.

FMC Technologies offers a full line of forged fittings with Weco® wing union end connections. Crosses, tees, ells (block and long radius), wyes, and laterals are available in 1 through 4 inch sizes for services up to 20,000 psi CWP.

FMC Technologies’ new lightweight pup joints with integral Weco® wing union end connections enable faster, easier make-up and break-out of temporary flowlines than ever before. Available in lengths up to 12 feet, these alloy-steel pup joints efficiently handle a complete range of well servicing fluids at cold working pressures up to 15,000 psi. FMC Technologies’ pup joints are also available for sour gas services at working pressures up to 10,000 psi.

APIIntegral Pup Joints are straight tubes/pipes with hammer union, thread, or flange connections on both ends, which have been widely used for transporting high pressure flow in fracturing manifold, cementing manifold, maintenance manifold and test manifold.

Qihang"s Integral Pup Joints are forged from premium alloy steel, handled by advanced metal melting and heat treatment technology. All of our pup joints are strictly desined, manufactured and tested according to API 16C, APIQ1 and NACE 0175, both pressure thread seal straight pipe and non-pressure thread seal pup joint are available.

PME integral pup joints are forged by treating iron, heat treatment and machines under strict quality control system. PME Industrial supply flowlines irons pup joint as Schlumberger, Chiksan, WECO, FMC for onshore and offshore usage.

Contact PME today for integral pup joint HS Code, pup joint specs in PDF, well thickness for integral pup joint 5" 10K by Email contact@pmeindustrial.com or call directly +86 138 1899 0736

Weco® butterfly valves have been solving fluid control problems in oilfield and general industrial applications for over 20 years. Today FMC Technologies is putting that experience to work for you in more ways than ever before- meeting your changing needs with dependable Weco®butterfly valves,...

FMC Technologies" Longsweep swivel joints have been the industry standard since their introduction in 1954. Now there is a new standard...the Longsweep TripleStep swivel joint. Designed to overcome the limitations of conventional swivel joints, the TripleStep...

Today, FMC Technologies is working harder than ever to make sure you get the exactChiksan®swivel joints you need, when you need them. Chiksan swivel joints are metal pipe fittings with integral ball-bearing swivels. These rugged fittings come in 3/8- to 12-inch sizes and can handle cold working...

FMC Technologies" Temporary Pipeworks Restraint System (TPR System) is designed for use on high pressure temporary well service flowlines. Properly applied, this system will provide an additional level of protection for personnel and physical assets by minimizing the amount of sudden movement...

FMC Technologies offers a full line of forged fittings with Weco® wing union end connections. Crosses, tees, ells (block and long radius), wyes, and laterals are available in one through four inch sizes for services up to 15,000 psi cold working pressure. FMC Technologies" integral fittings are...

FMC Technologies" new lightweight pup joints with integral Weco®wing union end connections enable faster, easier make-up and break-out of temporary flowlines than ever before. Available in lengths up to 12 feet, these alloy-steel pup joints efficiently handle a complete range of well servicing...

The Weco® pressure relief valve is a direct acting, self reseating valve. The relieving mechanism is a spring loaded ball and seat arrangement and will relieve fluid at pressures up to 15,000 psi. An adjustment screw at the top of the valve allows the relieving pressure to be adjusted from 1,000 to...

Weco®ULT and DR plug valves are premium, quarter-turn valves designed for a wide range of standard and sour gas drilling, production and well-servicing applications. These rugged valves are offered in single and dual-body designs in pressures to 20,000 psi. They range in size from one to four...

Weco® check valves are used to isolate well-servicing equipment from high-pressure treating fluids during fracturing applications. Offered in three primary models, these rugged valves seal against a complete range of well-servicing fluids at pressures to 20,000 psi. Valves are available in one and...