fmc weco pup joint quotation

Now there’s a new Lightweight Fittings family that is ideal for handling a complete range of well servicing fluids at cold working pressures to 20,000 psi. Available in 1- to 4-inch sizes, FMC fittings feature high-quality forged construction with integral Weco wing union end connections for a high-strength, high-integrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation. Like other FMC flowline products, FMC’s Integral Fittings come with full material traceability and can be supplied with Charpy impact values.

FMC Integral Fittings can be used in combination with FMC Plug Valves to create manifolds for choke-and-kill, well testing, squeeze, flow back, and cementing applications. Unlimited manifold designs using FMC’s advanced ULT and world proven DR Plug Valves can be easily constructed. Because FMC’s new line of integral fittings are lighter and smaller, you save valuable weight and space regardless of manifold design.

FMC Technologies offers the most complete line of fittings for pressure pumping, high-pressure drilling, and production applications, and a full line of forged fittings with Weco® wing union end connections for standard and sour gas service. All fittings are high quality forged construction with full traceability and can be supplied with charpy impact values.

FMC Technologies offers a full line of forged fittings with Weco® wing union end connections. Crosses, tees, ells (block and long radius), wyes, and laterals are available in 1 through 4 inch sizes for services up to 20,000 psi CWP.

FMC Technologies’ new lightweight pup joints with integral Weco® wing union end connections enable faster, easier make-up and break-out of temporary flowlines than ever before. Available in lengths up to 12 feet, these alloy-steel pup joints efficiently handle a complete range of well servicing fluids at cold working pressures up to 15,000 psi. FMC Technologies’ pup joints are also available for sour gas services at working pressures up to 10,000 psi.

TechnipFMC is the world’s leading supplier of flowline products and services to the oilfield industry and has set the standard against which others are measured. From the original Chiksan® and Weco® products to the revolutionary equipment designs and integrated services of today, TechnipFMC’s flowline family of products and services enables clients to achieve maximum equipment life and value in a wide range of applications.

TechnipFMC sets the benchmark for pressure control and flowline products and is the original equipment manufacturer of Chiksan®, Weco® and Coflexip™ products. Whether you are running a frac operation, performing well intervention or testing a well, we provide products and solutions for all pressure and flow control projects while never compromising safety. Safety on the well site is paramount and our flowline equipment has earned our customers’ trust throughout the world. Through our global network of available manufacturing stock and nearby service hubs, TechnipFMC supports our customers’ operations with skilled technicians ready to deliver all service needs. No matter what you need, our people are ready 24/7.

TechnipFMC offers its customers the ability to electronically pull a Certificate of Conformance based on a unique serial number for products manufactured in Stephenville, TX

Swivel Joint(interchangable with FMC Chiksan swivel joint) is a metal pipe adapter installed with roller bearing. There are long radius swivel joints and short radius swivel joints with size from 1" to 3" and working pressure range from 2,000psi - 20,000psi

Integral → The pup joints are one-piece construction made from alloy steel and feature wing union end connections that eliminate welds and threads. The pup joints are capable of handling a variety of fluids and a working pressure of 15,000 psi. Available in lengths up to 15 feet, they are pressure rated to 10,000 psi for sour gas service.

Now there’s a new Lightweight Fittings family that is ideal for handling a complete range of well servicing fluids at cold working pressures to 20,000 psi. Available in 1- to 4-inch sizes, FMC fittings feature high-quality forged construction with integral Weco wing union end connections for a high-strength, high-integrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation. Like other FMC flowline products, FMC’s Integral Fittings come with full material traceability and can be supplied with Charpy impact values.

FMC Integral Fittings can be used in combination with FMC Plug Valves to create manifolds for choke-and-kill, well testing, squeeze, flow back, and cementing applications. Unlimited manifold designs using FMC’s advanced ULT and world proven DR Plug Valves can be easily constructed. Because FMC’s new line of integral fittings are lighter and smaller, you save valuable weight and space regardless of manifold design.

Weco ULT and DR plug valves are premium, quarter-turn valves designed for a wide range of standard and sour gas drilling, production, and well-servicing applications. These rugged valves are offered in single and dual-body designs in pressures to 20,000 psi. They range in size from 1 to 4-inches and come with threaded, Weco wing union, flanged, and clamp hub ends. Consult factory for configurations. Like all pressure containing products, Weco plug valves require special handling.

FMC offers the most complete line of standard service and sour gas wing unions with sizes ranging from 1- to 12-inches in diameter with working pressures up to 20,000 psi. Unions are available with line pipe or tubing threads, butt-weld, or nonpressure-thread seal end connections.Positive sealing designs

Weco unions are produced using the finest raw materials, tooling procedures, and heat-treating techniques available. Each union is carefully inspected to assure long, dependable service in the most extreme conditions.

Please see the below FMC parts, we can offer Fmc brand OEM. Please note Fmc requires end user and final destiantion for all quotes to insure destiantion of goods

Site: www.pmeindustrial.com; Cell: +8613818990736 PME take great pride in supplying API Standard products & solutions to our professional customers and contractors worldwide, API 7K Vibrator Rotary Hoses, API 16C Choke and Kill Lines, API 16D BOP Control Hoses, Weco Type Hammer Unions, Anti-slip Mat, API 6A Flowline Products, FMC SPM SJ Type Fluid Control, Plug Valves, Swivel Joints, Integral Fittings, Crossover Adapters, Pup Joints, and Cementing & Circulating Lines, etc. As the most reputable and experienced team for drilling, completion and production, PME can do your job faster and more efficiently at a lower cost.

FMC Sour Gas Equipmenthas been supplying reliable, field-proven sour gas equipment since 1970. Today, FMC is pursuing its commitment to you through improved designs, new materials, higher pressure ratings, and a rigorous new product research and development effort.

All Chiksan and Weco sour gas products meet or exceed NACE and API requirementsFMC began providing quality sour gas equipment long before the National Association of Corrosion Engineers (NACE) Standard MR-01-75 was written. Today, all Chiksan and Weco brand products for sour gas service meet or exceed NACE Standard MR-01-75 and the American Petroleum Institutes (API) Standard RP-14E.

Quality assurance second to noneBefore any Chiksan or Weco product for sour gas service reaches you, it goes through FMCs total quality assurance program. This rigid quality program approved by leading independent inspection organizations insures that all FMC sour gas products are manufactured and processed to the highest industry standards. The result: You get quality sour gas equipment that provides long life and dependable service every time.

Simple, positive identificationFor positive identification, all Chiksan and Weco sour gas products are stamped Sour Gas using low-stress dot stamping. FMC sour gas equipment is also painted with an olive green, zinc-chromate primer that is unique to sour gas products.

Widest selection in the oilfieldFMC offers you the most complete line of sour gas swivel joints, wing unions, and plug valves in the world. Other FMC products for sour gas service include Chiksan cementing and circulating hoses, Weco pup joints, fittings and adapters, Weco pressure relief valves, Weco check valves, and manifold assemblies.

Table of ContentsIntroduction ............................................................................................ 1 Weco Wing Unions .................................................................................. 2 Weco Plug Valves .................................................................................... 8 Chiksan Swivel Joints ........................................................................... 10 Weco Pup Joints .................................................................................... 12 Cementing & Circulating Hoses ........................................................... 13 Weco Integral Fittings & Adapters ....................................................... 14 Weco Pressure Relief Valve .................................................................. 16 Weco Check Valves ............................................................................... 16 FMC Manifolds ...................................................................................... 17 Warnings & Cautions ............................................................................ 18 How to Order ......................................................................................... 18 Terms & Conditions ............................................................................ IBC

eco wing unions are the most complete line of sour gas pipe connections available, ranging in size from 2- to 6-inches with cold working pressures to 15,000 psi. All Weco unions are color coded with an olive green, zinc-chromatic primer for quick identification. Materials meet NACE MR-01-75, ASTM and AISI standards.

Features & BenefitsPositive sealing designsWeco wing union seals vary according to pressure and application. All provide positive, pressure-tight sealing.

Weco Plug Valves eco sour gas plug valves are reliable, quarter-turn valves designed for services to 15,000 psi cold working pressure. These rugged valves range in size from 1 to 3 inches and come with integral Weco wing union ends. The union ends add considerable strength to the connection, reduce turbulence, and minimize corrosion and stress concentration sites. Weco sour gas plug valves are available with manual, handwheel, and hydraulic actuators.

Complete in-line maintenanceWeco sour gas plug valves can be rebuilt in-line using standard tools. Repair kits are available. FMC uses special sour gas resistant O-rings and seals in all Weco plug valves and repair kits for sour gas service. Only genuine FMC replacement parts are recommended for use in FMC plug valves.

Two-piece floating plug/stemFMCs proprietary floating plug and stem uniformly distribute load against the downstream seat to improve sealing and reduce operating torque.

Sour Gas Weco Plug Valve Reference ChartModel DR 150 Manual Operator Sizes in. (mm) 1 (25) 1x2 (25x50) 2 (50) ULT 150 Manual Operator ULT 150 Handwheel Operator ULT 150 Hydraulic Actuator DR 200 Manual Operator 3 (80) 3 (80) 3 (80) 2 (50) End Connection* Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 2202 CWP psi (bar) 10,000 (690) 10,000 (690) 10,000 (690) 10,000 (690) 10,000 (690) 10,000 (690) 15,000 (1034) Test psi (bar) 15,000 (1034) 15,000 (1034) 15,000 (1034) 15,000 (1034) 15,000 (1034) 15,000 (1034) 22,500 (1551) Part No. 3252285 3258139 3248705 P501010 3265257 3267427 3234183 Weight lbs (kg) 37 (17) 43 (20) 88 (40) 241 (109) 292 (132) 340 (154) 83 (38) Price CF CF CF CF CF CF CF

Features & BenefitsStreamlined bore minimizes flow restrictionsSmooth, round bore design minimizes turbulence and pressure drop. Longsweep swivel joints have extra-long radius elbows for even better flow characteristics.Primary packing

Patented, Snap-in ball racesBecause sour gas service requires specially heat-treated steel, Chiksan sour gas swivel joints use patented field replaceable snap-in ball races for extra strength, high load-bearing capacity, and low operating torque.

Leak detection portChiksan sour gas swivel joints have a leak-detection port between the primary packing and the secondary O-ring seal. If leakage past the primary packing should occur, it is forced through the port, signaling the need for packing replacement.A D C

Integral Weco wing union endsChiksan sour gas swivel joints come with integral Weco wing union end connections, eliminating welding and minimizing turbulence.B

Field repairableOnly occasional light greasing is required to keep Chiksan swivel joints on the job. If packing, bearings, snap-in races, or ball plugs should need replacing, easy-to-use field repair kits are available.A

Weco Pup Joints s lightweight, one-piece pup joints feature integral Weco wing union end connections. Available in lengths to 10 feet, Weco alloy-steel pup joints efficiently handle sour gas fluids at cold working pressures up to 15,000 psi.

Chiksan swivel jointsFMC all steel hoses feature Chiksan sour gas swivel joints which provide flexibility, absorb shock and vibration, and maximize flow characteristics.

Weco wing union connectionsWeco sour gas wing union end connections insure fast, pressure-tight make-up and break-out without threading, welding, or special connections.LSG-10 Longsweep (2 Style 50) Integral

Weco Adapters & Integral Fittings eco adapters and integral fittings are ideal for handling sour gas fluids at cold working pressures up to 15,000 psi. These proven products feature high-quality forged construction with integral Weco wing union end connections for a high-strength, highintegrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation.

Sour Gas Weco Adapter Assemblies Reference ChartSize, in. (mm) 2 (50mm) 2 (50mm) 2 (50mm) 2x 3 (50mm x 80mm) 2x 3 (50mm x 80mm) 2x 3 (50mm x 80mm) 2x 3 (50mm x 80mm) 3 (80mm) 3" (50mm) Configuration MxM MxF FxF MxM MxF FxM FxF MxM FxF End Connection Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 CWP psi (bar) 10,000 (690) 10,000 (690) 10,000 (690) 10,000 (690) 10,000 (690) 10,000 (690) 10,000 (690) 10,000 (690) 10,000 (690) Part No. 3259883 3265207 3259885 3263208 3257182 3258468 P501843 3259027 3259171 Weight lbs (kg) 17 (7.7) 22 (10) 11 (409) 38 (17) 23 (10.4) 31 (14) 19 (8.6) 41 (18.6) 14 (6.4) Price CF CF CF CF CF CF CF CF CF

End Connection Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 2202 Weco 1502 Weco 1502 Weco 2202 Weco 2202 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 2202 Weco 2202 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 1502 Weco 2202 Weco 1502

Weco Pressure Relief Valves eco Pressure Relief Valves for sour gas service are the automatic way to relieve pressure at preset system limits. These rugged, compact valves are available for cold working pressures up to 10,000 psi. The pressure relief valve comes in a 2-inch size with integral Weco wing union ends.

Weco Swing Check Valves equipment from high pressure fluids. These rugged valves seal against sour gas fluids up to 10,000 psi. They are available with or without a downstream vent (consult factory), and are available with integral Weco wing union ends. Consult factory for dimensions.

FMC Manifoldsoffers manifolds in materials, sizes, pressures, and temperature ratings for a complete range of sour gas oilfield applications. These rugged manifolds feature proven Chiksan and Weco fluid control sour gas components for unsurpassed reliability, fast make-up and break-out, and improved safety. Unlimited manifold designs using FMCs advanced ULT and DR Plug Valves are available. Manifold assemblies are available with various configurations and pressure ratings. Consult factory for prices.

Warnings & Safety Instructionscan not anticipate all of the situations a user may encounter while installing and using FMC products. Therefore, the user of FMC products MUST know and follow all applicable industry specifications on the safe installation and use of these products. Refer to FMC product catalogs, product brochures and installation, operating and maintenance manuals for additional product safety information or contact FMC at 800/772-8582.

WarningsFAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH! 1. Do not mix or assemble components, parts or end connections with different pressure ratings. Mismatched parts may fail under pressure. 2. Do not use or substitute non FMC components or parts in FMC products and assemblies. 3. Do not strike, tighten or loosen pressurized components or connections. 4. Do not exceed the rated working pressure of the product. 5. Complete and proper make-up of components and connections is required to attain rated working pressure. 6. Do not use severely worn, eroded or corroded products. Contact FMC for more information on how to identify the limits of erosion and corrosion. 7. Follow safe practices when using products in overhead applications. Products not properly secured could fall. 8. Select only appropriate product and

materials for the intended service: Do not expose standard service products to sour gas fluids. (Refer to NACE MR0175.) Do not interchange sour gas components with standard service components. Use appropriate safety precautions when working with ferrous products in below freezing temperatures. Freezing temperatures lower the impact strength of ferrous materials. 9. Follow manufacturers instructions and Material Safety Data Sheet directions when using solvents. 10. Make certain that personnel and facilities are protected from residual hazardous fluids before disassembly of any product. 11. If any leakage is detected from FMC products, take them from service immediately to prevent potential damage and personal injury. SAFETY INSTRUCTIONS The applications of FMC products are in working environments where general personnel safety procedures and policies MUST be followed. Always use appropriate protective equipment in high pressure, extreme temperature or severe service applications.

FMC Corporation Fluid Control Division Web: www.fmcenergysystems.com Email: fluid_control@fmc.com Fluid Control Headquarters FMC Fluid Control 6677 North Gessner Road Houston, TX 77040 Phone: (1) 713/510-6800 Fax: (1) 713/510-6803 Manufacturing Facility FMC Fluid Control 2825 West Washington P.O. Box 1377 Stephenville, TX 76401 Toll Free: 800/772-8582 (U.S.) Phone: (1) 254/968-2181 Fax: (1) 254/968-5709 Eastern FMC Fluid Control 130 St. Nazaire Road Broussard, LA 70518 P.O. Box 3091 Lafayette, LA 70505 Phone: (1) 318/837-9263 Fax: (1) 318/837-5844 Western FMC Fluid Control 1675 Broadway, Suite 1800 Denver, CO 80202 Phone: (1) 303/623-4622 Fax: (1) 303/623-7347 West Texas FMC Fluid Control 3500 West County Road North Odessa, TX 79764 Phone: (1) 915/550-2084 FAX: (1) 915/366-8538

Scotland FMC Corporation (U.K.) Ltd. Fluid Control Wellington Road Industrial Park Wellington Circle Aberdeen AB12 3JG, Scotland Phone: 011 + 44 + 1224/898-555 Fax: 011 + 44 + 1224/249-460 Singapore FMC South East Asia Pte. Ltd. 149 Gul Circle Singapore 629605 Phone: 011 + 65/ 862-3659 Fax: 011 + 65/ 861-8251 United Arab Emirates FMC International S.A. Al Moosa Tower, 17th Floor Box 3228 Dubai, United Arab Emirates Phone: 011 + 971 + 4/310-948 Fax: 011 + 971 + 4/310-950 Mexico FMC Equipo Petrolero S.A. de C.V. Carretera a Buena Vista km. 2.8 Ranchera Miguel Hidalgo Villahermosa, Tabasco, Mexico Phone: 011 + 52 + 93/50-0123 Fax: 011 + 52 + 93/50-1661 Venezuela FMC Services and Supplies Occidente, S.A. Fluid Control Division Avenida Intercomunal Diagonal Carretera "L" Sector Los Morochas, #202 Cludad Ojeda Edo Zulia, Venezuela Phone: 011 + 58 + 65-26901 Fax: 011 + 58 + 65-23406