octg pup joint suppliers price

Driveshafts are built to transmit power across rotating shafts, even when placed under stress. The driveshaft connects the front and rear axles. It resembles a large metal rod with a circular cross-section to which other components are attached to form a complete assembly. Axle shaft assemblies and drive shafts are used to couple a transmission with either an axle or another component such as a differential on four-wheel-drive vehicles. There are various types of wholesale octg pup joint available for cars, trucks, vans, and more!

Custom driveshafts can be selected and personalized using an assembly that consists of a journal, shaft, bearings, and U-joints all working together. It is important to match the components with the correct specification as per size, type and load applied. Front driveshafts add an aggressive look to vehicles and improve traction under hard acceleration by eliminating the torque reaction. These front driveshafts are made with equal length shafting and universal joints for a great fit without modifications. Rear driveshafts are also important for the vehicle transmission system. They transfer the power produced by the engine to the rear axle assembly with the least amount of friction and heat buildup. Universal driveshafts are used for SUVs, trucks, and other large trucks that have a long wheelbase. These driveshafts are relatively expensive but worth the investment.

Carbon-fiber driveshafts provide a very light yet strong replacement for conventional steel or aluminum shafts. Carbon fiber is a unique material whose strength and stiffness can be tailored to meet specific engineering requirements. That"s not it! We have more wholesale octg pup joint including driveshaft replacement parts, aluminum driveshafts, 2-piece driveshafts, and truck driveshafts.

Whether your business operates in the manufacturing, construction, automobile, engineering, aerospace, or another industry, access to a ready source of timely steel pup joint products is essential to fulfil customer orders. Discover experienced Chinese wholesalers that sell a wide range of pup joint products at Alibaba.com and buy with ease online with us. Alibaba.com makes it easy to find the wholesalers you need, with ready reviews, clear pricing, and fast customer service on hand to give you access to the products your business needs.

When you need a motivated supplier of pup joint products and other steel pipes, tubes, plates, and custom materials for your business operation, Alibaba.com is your first choice for convenience and rapid access to customer-reviewed Chinese wholesale businesses. Search our immediate listings to see which wholesalers have the steel pup joint products you need, and access clear pricing.

See what other customers thought of different Chinese steel wholesalers and find out more about different wholesale companies" markets, product ranges, and lead times. Customer service is made easy with online chat, email, and 24/7 communication via the Alibaba.com website. With steel products often challenging to find in domestic Western markets, it makes sense to find a new and experienced supplier of ready steel materials and pup joint products in China, with quick delivery and streamlined fulfilment processes. Search now to find instant Chinese wholesale suppliers who are keen to serve your business and set up to do so, quickly and efficiently, whatever your business needs and volumes may be.

One is a short Drill Pipe used to adjust the length of the Drill String; The other one OCTG Pup Joint is a pipe of non-standard length, which is used to adjust the length of tubular strings to its exact requirement.

Vigor can manufacture the Tubing Pup Joints by different technology - Upsetting and Machining process. if you have a special requirement on the Pup Joint production process, please just specify.

If you are looking for a competitive, high quality and fast delivery oilfield pup joint in stock, or if you are planning to buy pup joint API from one of the leading casing and tubing pup joint manufacturers, API 5CT pup joint in stock, l8013cr pup joint, nue/nue tubing pup joint manufacturers and suppliers China, please feel free to contact VIGOR.Details  of  API  Spec.  5CT  Oil  Tubing  Pup  Joint

The drill pipe joint is an important connecting part of the oil drill pipe and drilling tool, and is widely used in the oil drilling industry. Our pup joint drilling is finished with high-quality and unique materials for excellent durability and precise dimensional accuracy. The threads on the fittings are cut on a CNC machine, which ensures high precision of the threads and prolongs the service life of the fittings. Considering the specificity in practical applications, we use phosphate coating or copper plating to enhance the wear and chemical resistance of the joint. This pup joint drilling has good mechanical strength and comprehensive performance and meets international standards, it can be widely used in oil, natural gas, sewage treatment and other industries.

Outside Diameter of Tubing Joint: From 2-3/8"(60 3mm) to 4.5"(114.60mm) Pipe End: EUE/NUE Outside Diameter of Casing Joint: From 4-12"(114 3mm) to 20*(508mm)

PUP JOINT DRILLING, PUP JOINT INC, PUP JOINT, PUP JOINT OIL AND GAS, NPST PUP JOINT, API PUP JOINT DIMENSIONS, PUP JOINTS FOR SALE. DRILL, API, API 5CT, CASING, EUE, PIPELINES, TUBING,

Hot Tags: pup joint drilling, China, suppliers, manufacturers, factory, low price, for sale, in stock, made in China, ERW Structural Pipe, Socket Weld Cap, Class150 Blind Flange, Api 5l Line Pipe, Steel Pipe Reducer, Oil Casing and Tubing

ll pump joints are made from modified alloy steel heat-treated to a Brinell Hardness range of 285–341 with a Charpy V-Notch minimum impact strength of 40 ft-lbs at 70°F guaranteed to one inch below the surface Connections can be cold rolled after machining, if requested All connections are phos-coated to prevent galling during initial make-up

API Spec 5CT – This Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H.

All kinds of Casing and Tubing Jfe Nsct Pup Joint for OCTG produced by our company have reached the national standards. We keep on with our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We hope to gain the trust and support of our customers, employees, communities and other stakeholders, and work together to make our company stronger, better and bigger.

ll pump joints are made from modified alloy steel heat-treated to a Brinell Hardness range of 285–341 with a Charpy V-Notch minimum impact strength of 40 ft-lbs at 70°F guaranteed to one inch below the surface Connections can be cold rolled after machining, if requested All connections are phos-coated to prevent galling during initial make-up

API Spec 5CT – This Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H.

We care about your needs, we pay attention to the quality of Steel Pipe Seamless Nipple & Pup Joint; Oil OCTG Casing & Tubing Pup Joint Oilfield Services J55/K55/N80/L80/P110/C95/T95/80s, your satisfaction is our eternal pursuit, quality and integrity is our goal. We strictly and seriously fulfill our contracts, keep our promises and strengthen our network system of after-sales service. We set up a sense of quality service and do our best to do the entrusted project of each contracted customer.

Pursuant to subsection 38(1) of the Special Import Measures Act, the President of the Canada Border Services Agency made preliminary determinations of dumping and subsidizing on December 12, 2011, respecting the alleged injurious dumping and subsidizing of oil country tubular goods pup joints, made of carbon or alloy steel, welded or seamless, heat-treated or not heat-treated, regardless of end finish, having an outside diameter from 2 3/8 inches to 4 1/2 inches (60.3 mm to 114.3 mm), in all grades, in lengths from 2 feet to 12 feet (61 cm to 366 cm) originating in or exported from the People"s Republic of China.

On July 22, 2011, the Canada Border Services Agency (CBSA) received a written complaint from Alberta Oil Tool (AOT), a division of Dover Corporation (Canada) Limited of Edmonton, Alberta, (hereafter, “the Complainant”) alleging that imports of certain pup joints originating in or exported from the People"s Republic of China (China) are being dumped and subsidized and causing injury to the Canadian industry.

The Complainant provided evidence to support the allegations that certain pup joints from China have been dumped and subsidized. The evidence also disclosed a reasonable indication that the dumping and subsidizing had caused injury and are threatening to cause injury to the Canadian industry producing these goods.

On September 12, 2011, pursuant to subsection 31(1) of SIMA, the President of the CBSA (President) initiated investigations respecting the dumping and subsidizing of certain pup joints from China.

On September 13, 2011, the Canadian International Trade Tribunal (Tribunal) commenced a preliminary injury inquiry, pursuant to subsection 34(2) of SIMA, into whether the evidence discloses a reasonable indication that the alleged dumping and subsidizing of certain pup joints from China have caused injury or retardation or are threatening to cause injury to the Canadian industry producing the goods. On November 14, 2011, pursuant to subsection 37.1(1) of SIMA, the Tribunal made a preliminary determination that there is evidence that discloses a reasonable indication that the dumping and subsidizing of certain pup joints from China have caused injury or retardation or are threatening to cause injury.

On December 12, 2011, as a result of the CBSA"s preliminary investigations and pursuant to subsection 38(1) of SIMA, the President made preliminary determinations of dumping and subsidizing with respect to certain pup joints originating in or exported from China.

Of the other producers certified to produce the like goods in Canada, only Tenaris Canada (Tenaris), of Sault Ste. Marie, Ontario, confirmed that they are manufacturing them. Tenaris produces like goods which are premium pup joints in relatively small quantities and provided a letter supporting the complaint.

As part of the section 20 inquiry, RFIs were sent to all known producers of pup joints in other countries (excluding China). This list of certified producers was obtained directly from the American Petroleum Institute (API). A total of 139 RFIs were sent to these producers requesting domestic selling price and costing information for pup joints produced at their facilities.

Oil country tubular goods pup joints, made of carbon or alloy steel, welded or seamless, heat-treated or not heat-treated, regardless of end finish, having an outside diameter from 2 3/8 inches to 4 1/2 inches (60.3 mm to 114.3 mm), in all grades, in lengths from 2 feet to 12 feet (61 cm to 366 cm) originating in or exported from the People"s Republic of China.

Pup joints are oil country tubular goods (OCTG) made from carbon or alloy steel pipes used for the exploration and exploitation of oil and natural gas. These pipes may be made by the electric resistance welded (ERW) or seamless production method, and are supplied to meet American Petroleum Institute (API) specifications 5CT or equivalent standard. 5

Pup joints are primarily used for the purpose of adjusting the depth of strings or down hole tools, particularly where exact depth readings in a well are required for any given purpose, such as setting valves, packers, nipples or circulating sleeves. Pup joints are also used with down hole pumps. The number and lengths of pup joints may vary widely from well to well, depending on the various equipment and performance requirements established by engineers of the purchasing end users.

Pup joints may range from 2 feet to 12 feet in length with a permitted tolerance of plus or minus three inches. The sizes are generally 2, 4, 6, 8, 10 and 12 feet in length.

The input pipe is produced in accordance with API 5CT, and may be produced using either seamless or ERW material. While pup joints may be made with ERW pipe, the Canadian market employs predominantly seamless OCTG. All pup joints produced by the Complainant are seamless products. 6

The pup joints subject to these investigations are, by virtue of the characteristics such as the outside diameter range, essentially short lengths of OCTG tubing.

Theoretically, subject pup joints may be supplied to meet any grade including and not limited to, H40, J55, K55, M65, N80, L80, L80 HC, L80 Chrome 13, L80 LT, L80 SS, C90, C95, C110, P110, P110 HC, P110 LT, T95, T95 HC, and Q125, or proprietary grades manufactured as substitutes for these specifications. The most common demand in the Canadian market is for J55 or L80 grades.

The grade numbers define the minimum yield strength required of the grade in kilo-pounds [force] per square inch (“ksi” or 1,000 pounds per square inch). Pup joints may also be made to proprietary specifications. The Complainant makes or has the capability to produce pup joints in any of these specifications/grades.

As with all OCTG, a standard pup joint must be able to withstand outside pressure and internal yield pressures within the well. Also, it must have sufficient joint strength to hold its own weight and must be equipped with threads sufficiently tight to contain the well pressure where lengths are joined.

There is a small market segment for perforated pup joints. These are pup joints with holes in the body of the pup joint (usually 3/8 inch although they may have holes or slots of various sizes in the body). The product is produced with API 5CT tubing, though once perforated the product no longer conforms to an API 5CT specification, since it no longer meets the yield strength requirements. Perforated pup joints are employed to allow fluids to enter the production tubing. They can also be used to create a mud anchor. Perforated pup joints are included as goods subject to these investigations.

On March 23, 2010, the Tribunal excluded ‘pup joints’ as part of its finding in Inquiry No. NQ-2009-004 on Certain Oil Country Tubular Goods (OCTG). In that finding, the Tribunal stated:

“The Tribunal hereby excludes pup joints, seamless or welded, heat-treated or not heat-treated, in lengths of up to 3.66 m (12 feet), from its injury finding.” 7

Pup joints are manufactured in Canada by the Complainant using plain end tube as an input. For J55 grade pup joints, a length of J55 OCTG tubing is employed. For L80 grade pup joints, the input is an A-519 mechanical tube with the appropriate steel chemistry for L80 OCTG. The L80 input tube does not qualify for the API 5CT designation until it has been tested in accordance with API requirements. The Complainant performs the testing required.

The production process of the input pipe itself is virtually identical to that employed for OCTG tubing and casing. There are, however, significant subsequent costs associated with transforming the input tubing into pup joints including: cutting to length, end finishing, threading, and testing to meet the certification required.

For J55 grade pup joints, the Complainant produces an upset end by heating (upset forging) and butting to thicken the end of the pipe diameter for threading. J55 tubing is cut 8 inches longer than the required pup joint length to accommodate this process. In the case of L80 grade pup joints, the production process uses profiling rather than upset ends, and accordingly only 1/4 inch of additional length is needed to accommodate finishing. Profiling refers to machining the pipe towards the ends of the pipe so it is thicker at the far ends. This process is used instead of upsetting because upsetting a pipe with steel chemistry for an L80 grade would require the producer to heat-treat the pipe again.

Testing includes drift testing which is an assessment of the straightness within the hollow part of the tube, to ensure no bends or kinks exist after the pup joint was forged, and hydrostatic testing which assesses the pup joint"s ability to withstand internal pressure.

The Complainant, Alberta Oil Tool (AOT) of Dover Corporation, accounts for the major proportion of domestic production of like goods in Canada. The Complainant manufactures pup joints in Canada at its facilities in Edmonton, Alberta.

Dover Corporation (Canada) Limited (Dover) produces and markets a wide range of production service equipment solutions for the oil and gas industry. AOT is a division of Dover, and operates as part of the Norris Production Solutions business unit along with Norris Rods (USA). Norris was founded in 1882. AOT produces and sells its products under the Norris brand, including pup joints.

Among the products produced and sold by the AOT division of Dover are pup joints, sucker rods, drive rods, tubing and casing fittings, butterfly valves and controls.

Regarding the dumping investigation, information was requested from known and potential exporters, vendors and importers, concerning shipments of subject pup joints released into Canada during the Dumping POI of July 1, 2010 to June 30, 2011.

Regarding the subsidy investigation, information related to potential actionable subsidies was requested from known and potential exporters and the GOC concerning financial contributions made to exporters or producers of subject pup joints released into Canada during the Subsidy POI of January 1, 2010 to June 30, 2011.

In the current case, the Complainant requested that section 20 be applied in the determination of normal values due to the alleged existence of the conditions set forth in paragraph 20(1)(a) of SIMA. The Complainant provided information to support these allegations concerning the Chinese OCTG sector, which includes pup joints.

At the initiation of the investigation, the CBSA had sufficient evidence, supplied by the Complainant and from its own research and past investigation findings, to support the initiation of a section 20 inquiry to examine the extent of GOC involvement in pricing in the OCTG sector, which includes pup joints. The information indicated that Chinese prices in this sector have been influenced by various GOC industrial policies. Consequently, the CBSA sent section 20 RFIs to the GOC and all known Chinese OCTG producers and exporters to obtain information on the matter.

The OCTG sector, which includes pup joints, is the same sector that was examined in the CBSA"s investigations of certain Seamless Steel Casing (2008) and certain OCTG (2010). Each of those section 20 inquiries concluded that domestic prices in the OCTG sector in China are substantially determined by the GOC and that there is sufficient reason to believe that the domestic prices are not substantially the same as they would be in a competitive market.

The following is the CBSA"s analysis of the relevant factors that are present in the Chinese steel industry and which affect the OCTG sector, which includes pup joints.

The 2009 Steel Revitalization/Rescue Plan also applies to the OCTG sector in China, which includes pup joints. The GOC specifically directed one of the cooperating exporters in the OCTG(2010) investigation, which was one of the largest state-owned enterprise (SOE) producers, and possibly the largest seamless OCTG manufacturer, to reorganize with another company.14

The 12th Five-Year Plan also includes restrictions on steel capacity expansion. This plan further supports the initiatives in the NSP and the 2009 Steel Revitalization/Rescue Plan. The CBSA"s section 20 inquiry in the Seamless Steel Casing (2008) investigation confirmed that the GOC"s control of new or additional steel production capacity extended to the OCTG sector, which includes pup joints.22

In respect of the OCTG sector, to further expand the development of high collapse and anti-corrosion pipes, such as grade P110 in addition to premium connection pipes;

As stated above, one GOC directive under the China Steel Pipe Industry 12th Five-Year Plan is to expand the development of OCTG products such as high collapse, anti-corrosion pipe.25 Chinese OCTG producers are not motivated solely by commercial interests, but must operate and be attentive to the GOC"s objectives, which may conflict with commercial interests. Based on the information on the record, the scope of the GOC"s macro-economic policies and measures have resulted in significant influences on pricing within the Chinese steel industry including the OCTG sector, which includes pup joints.

With the sole cooperating exporter/producer of pup joints being export-oriented, there is no information on the record for domestic selling prices of pup joints. In the absence of Chinese domestic prices for pup joints, the CBSA considers it reasonable to examine other goods in the OCTG sector such as casing and tubing, as pup joints are simply shorter lengths of OCTG casing and tubing.

The Chinese domestic prices of J55 seamless casing as reported by Metal Bulletin Research (MBR) were compared to prices of J55 welded casing as reported by Pipe Logix. Pipe Logix does not report J55 seamless casing. Since there is usually a price premium for seamless products this is a conservative price comparison.26 A downward adjustment to the Pipe Logix price as was done for the OCTG investigation was incorporated as well to account for differences in levels of trade.27

The wide range and material nature of the GOC measures have resulted in significant influence on the Chinese steel industry including the OCTG sector, which includes pup joints. Based on the preceding, the President is of the opinion that:

During the final stage of the dumping investigation, the CBSA will continue the section 20 inquiry and further verify and analyze relevant information. The President may reaffirm his opinion that the conditions of section 20 exist in the OCTG sector, which includes pup joints, as part of the final phase of the investigation, or conclude that the determination of normal values may be made using domestic selling prices and costs in China.

For purposes of this preliminary determination, normal values could not be estimated on the basis of domestic selling prices in China or on the full cost of goods plus profit, because the President formed the opinion that the conditions of paragraph 20(1)(a) of SIMA exist in the OCTG sector, which includes pup joints, in China.

In calculating the weighted average estimated margin of dumping for the country, the overall estimated margins of dumping found in respect of each exporter are weighted according to each exporter"s volume of subject pup joints exported to Canada during the Dumping POI.

Based on the preceding, 100% of pup joints from China were dumped by an estimated weighted average margin of dumping of 125.7%, expressed as a percentage of the export price.

The estimated weighted average margin of dumping of certain pup joints from China is above 2% and is, therefore, not insignificant. As well, the volume of dumped goods from China is above 3%, and is, therefore, not negligible.

Hengshui Weijia is a producer and exporter of certain pup joints to Canada. The company was incorporated in August 2009 as a Sino-foreign joint venture.30 Hengshui Weijia is a limited liability company, which is privately held by a Chinese limited liability company, and a Canadian limited liability company, WestCan Oilfield Supply Ltd., which owns 49% of Hengshui Weijia.31

As previously explained, given the current absence of surrogate pricing or cost information, import pricing from other countries or any other pup joint pricing that would be usable for the purposes of a preliminary determination, normal values were estimated by advancing the export price of the goods by the estimated margin of dumping determined for the initiation of the investigation, which was calculated at 32.4%. The estimated margin of dumping for Hengshui Weijia is 32.4 %, expressed as a percentage of the export price.

In conducting its investigation, the CBSA sent a subsidy RFI to the GOC, as well as to the potential exporters located in China that had been identified through internal CBSA documentation. Information was requested in order to establish whether there had been financial contributions made by any level of government, including SOEs possessing, exercising or vested with government authority, and, if so, to establish if a benefit has been conferred on persons engaged in the production, manufacture, growth, processing, purchase, distribution, transportation, sale, export or import of certain pup joints; and whether any resulting subsidy was specific in nature. The GOC was also requested to forward the RFIs to all subordinate levels of government that had jurisdiction over the exporters. The exporters were requested to forward a portion of the RFI to their input suppliers, who were asked to respond to questions pertaining to their legal characterization as SOEs.

In summary, the GOC provided information concerning the amounts received by the identified exporters of pup joints to Canada for four subsidy programs. These programs are:

The GOC identified 18 subsidy programs that were not used by the exporters of pup joints during the POI and for the remainder of the 80 listed subsidy programs identified by the CBSA, the GOC either indicated that there was no such program, it had no information on the program or that the GOC disagreed with the CBSA on the nature of the subsidy.

Based on the information available to the President, on December 12, 2011, the President made preliminary determinations of dumping and subsidizing respecting certain pup joints originating in or exported from the People"s Republic of China, pursuant to subsection 38(1) of SIMA.

the majority of the subsidy programs under investigation have been examined by the CBSA in previous subsidy investigations in respect of China (including OCTG in 2010) and, consequently, the GOC would have much of the information already on hand.40

Pursuant to subsection 8(1) of SIMA, provisional duties, payable by the importer in Canada, will be applied to dumped and subsidized subject pup joints that are released during the provisional period commencing on the day the preliminary determinations are made, and ending on the earlier of the day on which the President causes the investigations to be terminated pursuant to subsection 41(1) or the day on which the Tribunal makes an order or finding. The imposition of provisional duties is needed to prevent the injury which, as per the Tribunal"s preliminary determination, was caused by the dumping and subsidizing of subject pup joints.

If the Tribunal makes a finding that the dumping has caused injury, retardation or is threatening to cause injury, anti-dumping duties in an amount equal to the margin of dumping will be levied, collected and paid on imports of subject pup joints.

If the Tribunal makes a finding that the subsidizing has caused injury, retardation or is threatening to cause injury, countervailing duties in the amount equal to the amount of subsidy on the imported goods will be levied, collected and paid on imports of subject pup joints.

Trading:ONE IMT DRILL RIG MODEL AF 125 MOUNTED ON CAT 323D WITH EXTENDIBLE CRAWLER TRACK VARYING F ROM 2.5M TO 3.64M INCLUDING A 4 38 INTERLOCK ING KELLY BAR SQUARE JOINT 130 X 130MM. . CIF ANY USA PORT P.O. NO. 08 AL060 ENGINE S ERIAL NUMBER 2724739 HORSEPOWER 115KW DAT E OF MANUFACTURE MAY 21ST. 2008 IRREVOCABL E DOCUMENTARY CREDIT NO. LM730543 FREIGHT PR EPAID OCEAN BILL OF LADING

Trading:FROZEN GENERAL FOODSTUFFS FROZEN FISH CAKE HS CODE 1604 20 0000 G W 3 300 00 KGS FROZEN THAI DESSERT TODDY PALM CAKE BAKED HS DOCE 2006 00 9000 G W 1 400 00 KGS FROZEN THAI DESSERT WITH BANANA BAKED HS CODE 2106 90 0000 G W 2 072 00 KGS FROZEN BLACK GLUTINOUS FLOUR IN BAMBOO JOINT HS CODE 2106 90 0000 G W 2 100 00 KGS FROZEN WHITE GLUTINOUS FLOUR IN BAMBOO JOINT HS CODE 2106 90 0000 G W 2 800 00 KGS FROZEN THAI DESSERT WITH BANANA BAKED HS CODE 2106 90 0000 G W 2 072 00 KGS FROZEN THAI DESSERT KANOM CHUN PANDAN FLAVOR BAKED HS CODE 2106 90 0000 G W 950 00 KGS FROZEN CHA OM WITHOUT STEM VEGETABLE HS CODE 0709 90 9000 G W 1 668 00 KGS FROZEN LAO OLIVE VEGETABLE HS CODE 0710 80 0000 G W 438 60 KGS FROZEN RHIZOME STRIP KRACHAI VEGETABLE HS CODE 0709 90 0000 G W 216 00 KGS FROZEN STEAM MACKEREL FISH FRESH WATER FISHCLEAN GUTTED OUT HS CODE 1604 19 3000 G W 1 800 00 KGS FROZEN BANANA LEAVE VEGETABLE HS CODE 1404 90 0000 G W 796 59

Trading:METAL JOINT WRENCH BOLT T NUT WIDE SCREW CASTER STRAPMETAL JOINT WRENCH BOLT T NUT WIDE SCREW CASTER STRAP INVOICE NO SEHA 211001 213 H S CODE 7308 90 9000 7318 15 2000 7318 15 1000 7308 90 9000 FREIGHT COLLECTMETAL JOINT WRENCH BOLT T NUT WIDE SCREW CASTER STRAP

Trading:003349260000037214LB||003851640000042796LB||ENT CONTAINS NO SOLI D WOOD PAC KING MATERIALS||HEAD PLATE TAIL PLATE CONNE CTING PLATE RECESSED FILTER P LATE RECESSED FILTER PLATE S QUEEZE PIPE WATER NOZZLE SQU EEZE HOSE PLATE CHAIN FILTER PLATE CLOTH RETAINER SWIVEL JOINT MEMBRANE FILTER PLATE

Trading:PINE OF KILN DRIED BRAZILIAN PINE FINGER JOINT MOULDINGS PO 1012975 00 1012976 00 1012977 00 1012979 00 1012986 00 PINE OF KILN DRIED BRAZILIAN PINE FINGER JOINT MOULDINGS PO 1012975 00 1012976 00 1012977 00 1012979 00 1012986 00 PINE OF KILN DRIED BRAZILIAN PINE FINGER JOINT MOULDINGS PO 1012975 00 1012976 00 1012977 00 1012979 00 1012986 00 PINE OF KILN DRIED BRAZILIAN PINE FINGER JOINT MOULDINGS PO 1012975 00 1012976 00 1012977 00 1012979 00 1012986 00 PINE OF KILN DRIED BRAZILIAN PINE FINGER JOINT MOULDINGS PO 1012975 00 1012976 00 1012977 00 1012979 00 1012986 00 EPAID FREIGHT AS PER AGREEMENT WOODEN PAC KAGE TREATED AND CERTIFIED HT DUE 20BR0 00590546 8 RUC 0BR10 5560182000000000000000003 88673 NCM 4409 1

Trading:01 CONTAINER 40HC CONTAINING 16 BUNDLES WITH 8286 PIECES FINGER JOINT PINE MOULDING ``A`` GRADE, KD, FREE OF DEFECTS PRODUCTS FROM WELL MANAGED FORESTS -

Trading:1. ПЕРЕХОДНИКИ ИЗ НЕРЖАВЕЮЩЕЙ УГЛЕРОДИСТОЙ СТАЛИ / CORBON AND STAINLESS STEEL TRANSITION JOINTS TRANSITION JOINT / ПЕРЕХОДНИК -26ШТ - ВЕС: 2121,17 КГ 2. МЕСТ 1, 1 ДЕРЕВ.ЯЩИК. 8. 102 11. 01 ОБЩЕЕ КОЛ. МЕСТ: 1

We provide many of the most common tools and accessories used in OCTG. As a single source supplier, we added this capability to complement the full-length threading and ease the supply chain with a one-stop supplier.

PUP JOINTS are a joint of pipe of non-standard length used to adjust the length of tubular strings to exact requirement. We provide both tubing (2 3/8” to 4”) and casing (4” to 13 3/8”) in all lengths. With our myriad of licenses (quality page) we are able to cut to length, thread and couple to meet specified needs. API casing and tubing pup joints are manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Premium pup joints are also available with premium connections and in API or exotic alloy grades.

MARKER JOINTS are a joint of tubing used in a workover or completion tubing string that serves as a position or depth indicator. In most cases, a marker joint is significantly shorter than other joints in the string so that it is easily noticeable.

A pup joint is a pipe without standard length. API SPEC 5CT pup joints are used to adjust the height of full length tubing or casing strings to exact requirement. They are also applied to adjust the depth of downhole tools. In order to cater to the needs of customers, JST is offering a broad range of API SPEC 5CT OCTG pup joints.

2.With our sophisticated manufacturing facility, we produce these joints by using high grade raw materials (which are sourced from vendors of high repute) and cutting edge technology to ensure their sturdy design and longer functionality.

Jiangyin Changjiang Steel Tube Making Factory is a leading manufacturer and supplier of seamless steel pipes and various special pipes in China. We mainly manufacture structure pipe, fluid pipe, high pressure boiler pipe, API pipe, marine pipe, alloy pipe, tubing, casing, line pipe, OCTG pup joint (such as API SPEC 5CT pup joint), etc. Our company sets up a steel tube technology R & D center with advanced pipe testing equipment. Through strict testing process, we are able to produce high quality steel pipes for customers. Our products have been exported to the Middle East, CIS, Southeast Asia, Africa, South America, North America, Europe, Australia and many other countries and regions.

Our supplier partners include producing mills in every continent of the globe, and we proudly represent them to distribute OCTG tubing, casing, couplings, pup joints, and line pipe in the demanding US and Canadian oil and gas markets, as well as in all Latin America region.