octg pup joint suppliers quotation

Driveshafts are built to transmit power across rotating shafts, even when placed under stress. The driveshaft connects the front and rear axles. It resembles a large metal rod with a circular cross-section to which other components are attached to form a complete assembly. Axle shaft assemblies and drive shafts are used to couple a transmission with either an axle or another component such as a differential on four-wheel-drive vehicles. There are various types of wholesale octg pup joint available for cars, trucks, vans, and more!

Custom driveshafts can be selected and personalized using an assembly that consists of a journal, shaft, bearings, and U-joints all working together. It is important to match the components with the correct specification as per size, type and load applied. Front driveshafts add an aggressive look to vehicles and improve traction under hard acceleration by eliminating the torque reaction. These front driveshafts are made with equal length shafting and universal joints for a great fit without modifications. Rear driveshafts are also important for the vehicle transmission system. They transfer the power produced by the engine to the rear axle assembly with the least amount of friction and heat buildup. Universal driveshafts are used for SUVs, trucks, and other large trucks that have a long wheelbase. These driveshafts are relatively expensive but worth the investment.

Carbon-fiber driveshafts provide a very light yet strong replacement for conventional steel or aluminum shafts. Carbon fiber is a unique material whose strength and stiffness can be tailored to meet specific engineering requirements. That"s not it! We have more wholesale octg pup joint including driveshaft replacement parts, aluminum driveshafts, 2-piece driveshafts, and truck driveshafts.

OCTG Pup Joints is one kind of common accessories for connection with casing and tubing. Threaded pup joints are divided into male threaded ends, single male threaded and Female threaded. The size and material is the same as the casing or tubing.

China N80 Pup Joint Manufacturer Derbo Supplies N80 Pup Joint, Hot Rolled, 1.66 Inch, EUE 2.40lb/ft, Oiled, Painting Finish, for Oil & Gas Industries.

Manufacturer of pressure, rig concept, well intervention, drilling, down-hole and tubular products. Pressure products include centering shear and fixed bore pipe rams, blowout preventers, diverter systems, connectors, check and gate valves, chokes, actuators, flow heads, manifolds, catchers, packers, hydrate seals, casing heads, casing and tubing head spools, adapters, and hangers. Rig concept products include rig packages, derricks, masts, and skidding systems. Drilling products include electric and hydraulic top drives, makeup/breakout units, pipe handling units, cabins, operation stations, chairs, automatic drillers, anti-collision systems, and navigators, and draw works. Down-hole products include coiled tubing orienteers, drilling motors and jars, and survey and shock tools. Tabular products include drill pipe connections, collars, Kelly’s, subs and pup joints, and pipes.

ll pump joints are made from modified alloy steel heat-treated to a Brinell Hardness range of 285–341 with a Charpy V-Notch minimum impact strength of 40 ft-lbs at 70°F guaranteed to one inch below the surface Connections can be cold rolled after machining, if requested All connections are phos-coated to prevent galling during initial make-up

API Spec 5CT – This Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H.

We care about your needs, we pay attention to the quality of Steel Pipe Seamless Nipple & Pup Joint; Oil OCTG Casing & Tubing Pup Joint Oilfield Services J55/K55/N80/L80/P110/C95/T95/80s, your satisfaction is our eternal pursuit, quality and integrity is our goal. We strictly and seriously fulfill our contracts, keep our promises and strengthen our network system of after-sales service. We set up a sense of quality service and do our best to do the entrusted project of each contracted customer.

ll pump joints are made from modified alloy steel heat-treated to a Brinell Hardness range of 285–341 with a Charpy V-Notch minimum impact strength of 40 ft-lbs at 70°F guaranteed to one inch below the surface Connections can be cold rolled after machining, if requested All connections are phos-coated to prevent galling during initial make-up

API Spec 5CT – This Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H.

All kinds of Casing and Tubing Jfe Nsct Pup Joint for OCTG produced by our company have reached the national standards. We keep on with our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We hope to gain the trust and support of our customers, employees, communities and other stakeholders, and work together to make our company stronger, better and bigger.

We provide many of the most common tools and accessories used in OCTG. As a single source supplier, we added this capability to complement the full-length threading and ease the supply chain with a one-stop supplier.

PUP JOINTS are a joint of pipe of non-standard length used to adjust the length of tubular strings to exact requirement. We provide both tubing (2 3/8” to 4”) and casing (4” to 13 3/8”) in all lengths. With our myriad of licenses (quality page) we are able to cut to length, thread and couple to meet specified needs. API casing and tubing pup joints are manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Premium pup joints are also available with premium connections and in API or exotic alloy grades.

MARKER JOINTS are a joint of tubing used in a workover or completion tubing string that serves as a position or depth indicator. In most cases, a marker joint is significantly shorter than other joints in the string so that it is easily noticeable.

Oil Country Tubular Goods (OCTG) Pipes - are pipes used in wells in oil and gas industries consisting of casing, tubing, drill pipe, conductor pipe, couplings & pup joints, most of them are Seamless Steel Pipes.

Oil Country Tubular Goods (OCTG) Pipes are manufactured according to API (American Petroleum Institute, API SPEC 5CT, API 5DP) Specifications. also available to ISO 9001:2008.

China OCTG Casing Steel Pipemanufacturer Landee supplies API 5CT OCTG Casing Pipe, API SPEC 5CT, J55, K55, L80, N80Q, C90, C95, P110, Thread: BTC, STC, LTC.

OCPL offers a wide range of OCTG Casing Pup Joints, with both API and premium threads, manufactured at our select API spec. 5CT compliant steel mills.

NOTE:OCTG casing to suit Coupled; Semi-Flush and Flush connections, with casing ID to suit your poundage (including clearance couplings & special drift ID).

[69]As mentioned earlier, four parties provided responses to the CBSA’s ERQ: Canadian producers AOT and Tenaris Canada and related importer and exporter WestCan and Weijia. In addition to ERQ responses, AOT, WestCan and Weijia submitted case briefs. All four parties made representations that dumping of pup joints from China is likely to continue or resume should the CITT rescind its finding.

[71]A narrower picture of the steel market, the seamless pipe market - of which pup joints are a small subset - offers a similar view. According to data from China’s National Bureau of Statistics, the country’s seamless pipe output increased to a record yearly high of 29.63 million metric tons in 2013 due in part to newly commissioned capacity. CISA affiliated China Metallurgical News (CMN) predicted that, due to oversupply and lukewarm domestic demand, the seamless pipe industry would likely remain under downward pressure in 2014. CMN also warned that the ramp-up in China’s seamless pipe production was likely to continue and that the overcapacity could cause the surplus to worsen in the coming years.

[72]At the same time as producers of seamless pipe in China were significantly increasing production levels and breaking production records, PetroChina and Sinopec, the country’s two largest oil and gas producers, were reducing capital spending. The reduced spending at the country’s largest energy companies was predicted to result in lower demand for OCTG in China.

[73]The CSPA official concluded that the fierce competition resulted from oversupply and low industry concentration and accused mills of selling OCTG at a loss.

[74]Specific information on production volumes and production capacities of pup joint producers in China is difficult to obtain. The reason for this is that pup joints are a very small subset of a much larger group of products called OCTG, comprised primarily of casing, tubing and drill pipes. Due to the small quantities of pup joints produced and the correspondingly small revenues generated from their sales, many companies do not track their production independently. OCTG producers, who are primarily concerned with producing and selling full length casing and tubing products, may simply merge pup joint production data with that of either casing or tubing since pup joints are often considered smaller pieces of casing and tubing. Despite the difficulties encountered in finding accurate production data on pup joints, either from producers themselves or from trade publications, there is sufficient information on the CBSA’s record pertaining to the broader category of OCTG products as well as information pertaining to a limited number of pup joint producers in China.

[76]OCTG producers in China who also produce pup joints include such companies as: Shandong Molong Petroleum Machinery, which boasts production capacity of 650,000 mt/y;

[78]With strong competition in their domestic market due to weaker sales and significant overcapacity, OCTG producers in China will have to continue to rely on export markets if they wish to survive given the challenging conditions they are confronted with, both in their home market and in the global energy market. Information on the record shows that one company has “lifted its export target” while another company “will have to . . . focus on exports.”

[80]In Canada, there are currently 11 different steel products from China that are subject to anti dumping duty, not including pup joints. Of note are many tubular products such as carbon steel welded pipe and piling pipe and, more specifically, line pipe, OCTG and seamless casing.

[81]As stated above, pup joints from China are not only subject to a finding in Canada but are also subject to an anti-dumping duty order in the U.S. by virtue of being included under the product definition of ‘oil country tubular goods from China’. In May 2015, the U.S. International Trade Commission extended anti-dumping duty orders on OCTG from China for a further five years. Based on the fact that the North American market is one of the largest OCTG markets in the world, and the fact that the Canadian and American markets are highly integrated with many of the same players, there is a distinct possibility that pup joints from China will be diverted from the U.S. market to Canada to be sold at unrestricted prices should the finding be rescinded.

[82]In the CBSA’s original dumping investigation of pup joints from China, which was initiated in 2011, Weijia was the only exporter to participate. Similarly, Weijia was the only exporter of pup joints to participate in the CBSA’s re-investigation of these goods in 2015. In both instances Weijia received a ruling letter from the CBSA outlining how the company would receive normal values on a monthly basis. The normal values would be based in part on the selling prices of tubing product sold in the U.S. and tracked by the trade publication Pipe Logix. It is noteworthy that Weijia has been able to sell to WestCan, its related importer in Canada, during the POR while imports of subject pup joints from other exporters in China have ceased. The lack of cooperation of other exporters in the re-investigation and the fact that all other exporters have vacated the Canadian market while Weijia has remained is a telling indication of the inability of other exporters in China to compete in Canada at non dumped prices.

[83]Also telling are the comments made by certain pup joint producers in China and obtained by AOT in response to its request for price quotations. The comments indicate that Canadian customers stopped purchasing pup joints once anti-dumping and countervailing duties were put in place in December 2011.

[84]In order to determine at what price levels pup joints from China might re enter the Canadian market absent the finding, WestCan procured a number of quotes from potential suppliers in that country.

[85]The likelihood of continued or resumed dumping of pup joints from China must be examined in context of what is happening in Canada’s oil and gas industry, in which OCTG products play an integral role. In 2014 oil prices peaked at around $US115/barrel, fell to $US27/barrel in January 2016 and have remained under $US50/barrel ever since. The rapid declines in oil prices in 2015 and 2016, along with continued weakness in gas, caused a dramatic decline in drilling activity in Canada. In 2013 and 2014, 11,000 wells were drilled in North America but drilling declined to 5,300 wells in 2015 and it is anticipated that only 3,400 wells will be drilled in 2016.

[86]Based on information on the record demonstrating the significant production capabilities of OCTG and pup joint producers in China and a slowing demand for these products in that country; anti-dumping measures being imposed by Canada and other countries on the same or closely-related tubular products from China; and the inability of exporters, save one, to sell pup joints in Canada at non-dumped prices, the CBSA determined that the expiry of the finding is likely to result in the continuation or resumption of dumping into Canada of certain pup joints originating in or exported from China.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Crossover pup joints are manufactured from seamless mechanical tube. As with all Crossover products, each piece is marked with a distinctive job number and heat number that is fully traceable. A complete range of sizes (1" to 4.5"), weights (standard or heavy wall), and grades (J-55, N-80, L-80, and P-110) are commonly available from stock in 2", 3", 4", 6", 10", and 12" lengths. Lengths up to 20" are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

A blast joint is shorter in length than standard tubular joint. Built with a heavy wall pipe it is incorporated in the production string to facilitate production across any perforated interval and zone. Blast Joints are manufactured to the following specs connections, lengths, weights and material grade.

Crossover Blast Joints are heavy wall pin by box connectors used in tubing strings and are designed to minimize the effect of external erosive action caused by production fluids. Blast joints are located opposite the location of perforations in the production casing or just below the tubing hanger in sand frac designs. Crossover blast joints are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2” OD. Any length, grade of material, and threading is available at the customers request. Typical lengths are 10" and 20". Both API and Premium threads are available.

Crossover Coarse Thread Tubing Safety Joint provides for emergency recovery of the major portion of the tubing string should it become necessary to abandon the equipment below. Precision left-hand threads facilitate the release of the joint by right-hand tubing rotation. Equipment requiring right-hand rotation should not be used below the Safety joint.

Crossover Straight-Pull/Shear-Out Safety Joint is used between packers in dual and triple completions and in selective completions using Hydrostatic Single-String Packers. It is also used when rotational releasing is not desired. When ran above the upper packer in a single-string completion, however, the shear value should be adjusted to compensate for any hydraulic conditions that exist when the string is landed, or that are created by well treating operations. They are available in keyed and non-keyed configurations.

Crossover rotary shoes are manufactured from specially tempered steel to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore. Each shoe is tailored to fit a particular downhole need and normally is run on the bottom of one or more joints of washover pipe. Shoe design is dictated by whether it cuts on the bottom, on the OD, on the ID, or any combination of these. When hole sizes permit, additional clearances can be cut using side ribs, thus providing greater circulation.

BRC INTERNATIONAL LLC is as a supply of high quality OCTG and Line Pipe in North America, South America, Europe and Middle East. Based in Houston Texas, BRC International LLC represents both domestic and foreign pipe manufacturers allowing us to offer entire range of OCTG and Line Pipe products. As a leading distributor of ERW and Seamless pipe, BRC International sets the goal to set competitive price and sets the industry standards in service and availability of Tubing and Casing products ranging from 2 -3/8” to 20” API5CT Grades J through Q125, Line Pipe ranging from ¼” to 110” API 5L and Drill Pipes ranging from 2-3/8” to 6-5/8” API 5DP, Grades E, X, G, S. BRC International built a reputation for expert knowledge in steel tubular products , strong support from world class manufacturers , Globally competitive pricing, 24/7 services by experienced professional for inquiries, order processing , monitoring of mill production and shipping status to meet scheduled deliveries of products. BRC Group of Companies is a supply home for high quality Tubular ranging from LSAW, Spiral, ERW and Seamless with size range covering from 1/8” to 110”. The company is placed uniquely in North American market with access to domestic & International Mills.