pin pup joint free sample

These J55, L80, N80Q & P110 pup joints are manufactured from seamless Grade J-55, L80 N80Q and P110 mechanical tubing. The API 5CT tubing pup joint is mainly used to adjust the height of the tubing strings. It is also used to adjust the depth of down-hole tools.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Crossover pup joints are manufactured from seamless mechanical tube. As with all Crossover products, each piece is marked with a distinctive job number and heat number that is fully traceable. A complete range of sizes (1" to 4.5"), weights (standard or heavy wall), and grades (J-55, N-80, L-80, and P-110) are commonly available from stock in 2", 3", 4", 6", 10", and 12" lengths. Lengths up to 20" are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

Swages are generally Box x Pin with a transition on the outside diameter and the inside diameter of the swage to assure that there are no sharp corners to set up an area of stress risers. When stress risers occur, there is a chance that the part could fail due to the fact that the part would be prone to crack in these areas.

A blast joint is shorter in length than standard tubular joint. Built with a heavy wall pipe it is incorporated in the production string to facilitate production across any perforated interval and zone. Blast Joints are manufactured to the following specs connections, lengths, weights and material grade.

Crossover Blast Joints are heavy wall pin by box connectors used in tubing strings and are designed to minimize the effect of external erosive action caused by production fluids. Blast joints are located opposite the location of perforations in the production casing or just below the tubing hanger in sand frac designs. Crossover blast joints are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2” OD. Any length, grade of material, and threading is available at the customers request. Typical lengths are 10" and 20". Both API and Premium threads are available.

Crossover Coarse Thread Tubing Safety Joint provides for emergency recovery of the major portion of the tubing string should it become necessary to abandon the equipment below. Precision left-hand threads facilitate the release of the joint by right-hand tubing rotation. Equipment requiring right-hand rotation should not be used below the Safety joint.

Crossover Straight-Pull/Shear-Out Safety Joint is used between packers in dual and triple completions and in selective completions using Hydrostatic Single-String Packers. It is also used when rotational releasing is not desired. When ran above the upper packer in a single-string completion, however, the shear value should be adjusted to compensate for any hydraulic conditions that exist when the string is landed, or that are created by well treating operations. They are available in keyed and non-keyed configurations.

Crossover Circulating Sub/Swages are manufactured from AISI 4140/4145. They typically are female hammer union on the top end and an IF pin on the bottom end, but can be manufactured with any size and style connection.

Crossover Drop Ball Circulating Subs are manufactured from AISI 4140/4145. The standard is pin by box. They are activated by dropping a chrome steel ball, which lands on a sleeve and as pressure increases, the pins in the sleeve are sheared. This causes the sleeve to move down and expose four ports in the side of the sub diverting the fluid flow.

Crossover Side Entry Subs are manufactured from AISI 4140/4145. They are manufactured from one piece. They are typically rotary shouldered pin by box with 2” 1502 female hammer union, but can be manufactured with any size and style connection.

These can be made Rotary Shoulder Box Up x Pin Down with the ½ union on the side, we can build with any combination of the connections placed anywhere on the sub. All of Crossover’s Side Entry Subs are Integral manufactured which means that the sub is one piece and has no heat affected zone from welding the ½ union onto the body.

Some customers request Lift Caps with Pad Eye for lifting. These are also made out 4145M and can be manufactured to fit any of several shackles. They can be built with either the pin or the box facing down.

Crossover rotary shoes are manufactured from specially tempered steel to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore. Each shoe is tailored to fit a particular downhole need and normally is run on the bottom of one or more joints of washover pipe. Shoe design is dictated by whether it cuts on the bottom, on the OD, on the ID, or any combination of these. When hole sizes permit, additional clearances can be cut using side ribs, thus providing greater circulation.

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

VIVUS’ delicious plant based chews are made from all natural superfoodingredients and naturally support dogs of all ages, especially senior dogs! These yummy chews contain green grown glucosamine, green grown chondroitin and omega-3 fatty acids for joint cartilage support and anti-inflammatory effect. Tasty ingredients include sweet potato, antioxidants and coconut oil.

Vivus Joint Support with Green Mobility Formula is entirely plant-based and contains none of the most common canine allergens, making it appropriate as an anti-inflammatory joint health supplement for some dogs with allergic dermatologic or gastrointestinal disease. The active ingredients are natural and botanical, providing functional support without the risk of adverse side effects.

This Free Sample Pack of SlabGasket™ will allow you to test fit the various sizes of SlabGasket™ to insure a correct snug fit for your expansion joint replacements. This Free Sample Pack includes both Gray and Almond color samples, as well as standard height and shorty height samples. A small (fully refundable) shipping charge will apply during checkout.

After receiving your Free Sample Pack, if you return and purchase 30 feet (or greater) of SlabGasket, we will fully refund the Sample Pack shipping charge!

Rapidly installed, blending beautifully with the existing concrete, SlabGasket™ Expansion Joint Replacement also provides a simple and effective weed-growth deterrent and a cure for trip and fall hazards associated with empty expansion joints.

Use the width to select the proper fitting SlabGasket size. The height (tall) of each size is provided below only so that you can insure you have sufficient depth. Properly fitted SlabGasket will stay in place as set; SlabGasket does not need to extend the full depth of the expansion joint.

The following are SlabGasket videos that have been submitted by our Customers. If we can share your video, please post your video to YouTube and Send us the Link! Watch the videos to see how SlabGasket™ Expansion Joint Replacement is successfully used for simple, easy, and permanent expansion joint replacement and repair.

Rapidly installed, blending beautifully with the existing concrete, SlabGasket™ Expansion Joint Replacement also provides a simple and effective weed-growth deterrent and a cure for trip and fall hazards associated with empty expansion joints.

Do you have unsightly weeds in those cracks and crevices? Are the expansion joints in your parking lot, sidewalk, driveway, patio or pool now rotten or missing? Why not replace them permanently? SlabGasket™ Expansion Joint Replacement is the perfect and cost effective solution to replace that rotten wood for life.

Integral → The pup joints are one-piece construction made from alloy steel and feature wing union end connections that eliminate welds and threads. The pup joints are capable of handling a variety of fluids and a working pressure of 15,000 psi. Available in lengths up to 15 feet, they are pressure rated to 10,000 psi for sour gas service.