pup joint hs code free sample

Seair Exim Solutions is providing Pup Joints import data of HS code 73042990. HS code 73042990 Import data and product(s) under 73042990 HS code is collected from Indian customs, ports, and other reliable authorities in India. This customs import shipment data report helps traders to analyse up and down in the Indian market, price of products under Hs code 73042990, demand for products, and top importers in India.

The items to be imported are referred to as pup joints and C&C hoses. A pup joint is a seamless cold-drawn alloy steel pipe that is threaded on one end and fitted on the other end with a wing union nut. The function of the pup joint is to connect two pieces of high-pressure equipment. A C&C hose is comprised of two pieces of seamless cold-drawn alloy steel piping connected by a wing union nut and swivel joints. Though in the form of a loop when in the closed position, the nut can be undone and the pipe can be rotated to the desired direction. Like the pup joint, the C&C hose is used for connecting high-pressure equipment. In addition, this loop can be used as a means of connecting either two pieces of pipe or two valves together in high-pressure applications.

The applicable subheading for the pup joints will be 7304.51.5060, Harmonized Tariff Schedule of the United States (HTSUS), which provides for tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel, other, of circular cross-section, of other alloy steel, cold-drawn or cold-rolled (cold-reduced), other, other, other. The rate of duty will be free.

In your letter, you suggest classifiying the C&C (cementing and circulating) hose as a pipe/tube under subheading 7304.51.5060. This hose is not merely lengths of pipe with fittings attached. Rather, this fabrication is made up into a specific identifiable article which can be folded up for transportation and storage. As such, it would be excluded from classification under any of the pipe/tube headings in Chapter 73.

Our import export data searching platform will be a vital tool for every step in international trading to inform the decision making. You can find potential worldwide buyers and suppliers based on hs code or product name and monitor your competitor to see their trade price and trade partners.

netco energy products inc. is a United States Buyer, the following trade report data is derived from its trade data; the company"s import data up to 2022-03-07 total 14 transactions. Based on these trade data, we have aggregated the data in terms of trading partners, import and export ports, countries of supply, HS codes, contact details and other dimensions, which will help you to improve the efficiency of using your foreign trade data.

Besides, We Are Trying Our Best To Provide Accurate Target Customers Recommend. Through Big Data, Recommend The Company That Buying Or Supplying The Same Product (Or HS Code) From The United States"s Buyer Company Database. That Including Email And Have Transaction Recently Will Be Pushed. So Suggest You Follow netco energy products inc., At The Same Time, Mark This Company"s Industry And Products, It Will Help You Receive More Accurate Data Push.

[117]As mentioned earlier in this summary, three parties provided responses to the CBSA’s ERQ: Canadian producer AOT; and related importer and exporter WestCan and Weijia. In addition to ERQ responses, AOT, WestCan and Weijia submitted case briefs. All three parties made representations that dumping of pup joints from China is likely to continue or resume should the CITT rescind its order.

[125]The market for pup joints in Canada will inevitably be impacted by the price of oil, as a higher price of oil will lead to more drilling, which will lead to a greater demand for drilling supplies, including OCTG and thus, pup joints.

[128]Global oil prices began to recover beginning in the late spring of 2020. The price of WCS rebounded throughout the year, and the improvement in oil prices led to the resumption of drilling, increasing demand for OCTG and pup joints in the second half of 2020. By the end of 2020, drilling activity in Canada had also recovered considerably, though it remained well below the pre-pandemic weekly peak of 257 rigs in February 2020.

[133]As such, global events are still rather volatile and the ultimate impact on the Canadian market for oil and gas remains in flux as does the trickle down impact on the demand for OCTG, including pup joints.

[134]Given the nature of pup joints as essentially short lengths of OCTG, the market trends seen in pup joints track closely with the trends seen in standard length OCTG.

“There are no industry publications or metrics that measure demand for pup joints specifically. However, since pup joints are produced from OCTG and are used to adjust lengths of OCTG tubing, the state of the Canadian OCTG market provides an accurate picture of the market for pup joints.”

[138]In terms of the impact on pup joints during the POR, the information on the record indicates that the Canadian market experienced its own series of shocks, similar to those of the oil and gas industry at large.

[139]Imports of pup joints also followed this trend as noted previously in Table 2 of this document where imports rebounded from roughly 209 MT in 2020 to just under 300 MT in 2021.

[140]The net effect of the global shocks from the increase in the price of oil and the impact of Russian sanctions are projected to result in a heightened demand for drilling in Canada and thus pup joints by Q3 2022,

[141]The large production capabilities of pup joint producers in China coupled with a flattening domestic market for these goods in China necessitates an export imperative for Chinese pup joint producers.

[144]Information on the administrative record also indicates that Chinese producers exported substantial volumes of seamless OCTG in 2021, of which pup joints would form a segment.

[149]By comparison, the CBSA’s estimate of the Canadian pup joints market in 2021 from Table 2 in this document is about 800 MT. Consequently, even with the current anti-dumping measures in place, confidential information on the record indicates that Weijia accounted for a significant part of the Canadian market in 2021 and has substantial capacity.

“it is expected that we could increase our production capacity three-fold to take advantage of the expansion of our business in the Canadian market. Needless to say, we expect that we would have to compete head on with the hundreds of other Chinese exporters of pup joints, even if those prices are at dumped and subsidized levels.”

[157]In Canada, there are currently 16 different steel products from China that are subject to anti-dumping measures, in addition to pup joints. At the last pup joints expiry review, there were 11 such measures.

[158]Of note are many tubular products such as carbon steel welded pipe and piling pipe and, more closely related to pup joints, line pipe, OCTG and seamless casing. These latter three products, like pup joints, are all goods specifically designed for the oil and gas industry. Sucker rods, although not a tubular product, are used in conjunction with OCTG in the extraction of oil and anti dumping (and countervailing) measures against Chinese sucker rods have come into effect since the last expiry review.

“In such circumstances, Hengshui Weijia will have no option but to lower its selling prices to Canada to compete with the dumped prices of the other Chinese exporters of pup joints; in order to do so, it will have to sell at prices significantly lower than their current prices (normal values) and resume shipping to Canada at dumped prices as it did prior to the initiation of the original investigation.”

[163]In the CBSA’s original dumping investigation of pup joints from China, which was initiated in 2011, Weijia was the only exporter to participate. Weijia was one of four cooperative exporters to receive normal values in the 2015 re-investigation.

[167]This was corroborated by WestCan’s market intelligence where they stated on the record that “WestCan is very active in the Canadian market where it resells the Hengshui Weijia pup joints and has not seen any evidence of other Chinese pup joints.”