pup joint meaning for sale

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

A pup joint is a casing or tubing of length shorter than Range 1 with the same thread connection, used to adjust the length of tubular strings to its exact requirement.

Pup Joints are manufactured from AISI 4145H or 4140H-modified alloy, heat-treated to a Brinell Hardness range of 285-341 with a Charpy “V” notch minimum impact strength of 40 ft/lb at 70° F and one inch below the surface. Pup Joints are heat-treated to 110,000 PSI minimum yield. All connections are phosphate coated to impede galling during initial make-up.

Integral Pup Joints dedicated to Sour Service applications are available. PJ -110 PUP S are Sour Service Pup Joint using ASCOWELL C material providing improved resistance to Sulfide Stress Cracking with high yield strength.

These J55, L80, N80Q & P110 pup joints are manufactured from seamless Grade J-55, L80 N80Q and P110 mechanical tubing. The API 5CT tubing pup joint is mainly used to adjust the height of the tubing strings. It is also used to adjust the depth of down-hole tools.

PUP JOINTS are a joint of pipe of non-standard length used to adjust the length of tubular strings to exact requirement. We provide both tubing (2 3/8” to 4”) and casing (4” to 13 3/8”) in all lengths. With our myriad of licenses (quality page) we are able to cut to length, thread and couple to meet specified needs. API casing and tubing pup joints are manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Premium pup joints are also available with premium connections and in API or exotic alloy grades.

MARKER JOINTS are a joint of tubing used in a workover or completion tubing string that serves as a position or depth indicator. In most cases, a marker joint is significantly shorter than other joints in the string so that it is easily noticeable.

Pup joints are nonstandard pipes used to adjust the length of the tubular string to meet the exact requirements. In addition, the pup joints are used to change the length of the drill string for drilling operations and easy surface handling. The appearance of the pup joints is largely determined by their mechanical properties.

Further, thePup Joint marketis segmented by product type, Technology, End-User, and geography. On the basis of product type, the Pup Joint market is segmented under Crossover Pup Joint, Tubing Pup Joint. Based on the Technology, the market is segmented under the Hot Rolled and Cold Rolled. Based on End-User, the market is segmented into Chemical Industry, Mining, Oil & Gas, Construction, and Others. By geography, the market covers the major countries in North America, i.e., the US, Canada, and Mexico. For each segment, the market sizing and forecasts have been done on the basis of value (in USD Million).

Increasing consumption of natural gas and oil, technological advancements in drilling techniques, and fast-growing industrialization are the major factors contributing to the market growth. The rise in demand for high-grade pup joints from several end-use industries is expected to drive the use of pup joints. Demand for pup joints is expected to rise because of the growing demand for energy and significant investments in exploring onshore and offshore reserves by the oil & gas and mining industries. Increased energy consumption, the economic development of the shipping industry, and increased seaborne trade are the major factors driving the demand for pup joints during the forecast period.

The decline in petroleum production may hinder the market"s growth. Renewable energy will be more affordable than existing oil and gas sources during the forecast period, which will restrain the market for pup joints.

Due to COVID-19, the major end-user industries of pup joints were affected, which will hinder the demand for pup joints since the oil & gas industry is the largest end-user. COVID-19 has had a significant impact on the downstream oil & gas industry due to the significant drop in prices and reduced demand caused by the economic slowdown, which affected production rates in many countries. However, major countries such as the US and Canada implement dynamic and diverse approaches to navigate and deal with what is happening due to COVID-19. As a result, the market will experience moderate growth during the forecast period. The United States is a major revenue generator in the North American pup joint market.

With changes in energy arrangements and expanding political pressures, the market interest in pup joints and comparable items is changing. Government and privately owned businesses are showing a clear interest in finding new oil stores to meet future needs. Ventures by significant oil exploration companies are likely to support the pup joint market.

By Product Type,the Pup Joint Market is segmented into Crossover Pup Joint, Tubing Pup Joint, and Drill Pipe Pup Joint. The Tubing Pup Joint had the highest market share in 2021. Tubing pup joints are likely to have a huge demand because they are also used to handle production tubing accessories. Tubing pup joints are tubing that is short in size and operated for spacing.

By Technology, the Pup Joint Market is segmented into Hot Rolled and Cold Rolled. The Hot Rolled segment had the highest market share in 2021. Under high temperature and pressure processing conditions, the steel tube can be completely devoid of air bubbles, cracks, and porosity. It has a good mechanical effect and excellent intensity.

By End-User, the Pup Joint Market is segmented into Chemical Industry, Mining, Oil & Gas, Construction, and Others. The Oil & Gas segment had the highest market share in 2021. The oil & gas business has been positively impacted by the introduction of several drilling technologies. Due to the reliance on petroleum-based products by various emerging economies, oil & gas dependence has increased. Petroleum is used to make a variety of chemical products, such as fertilizers, pharmaceuticals, and solvents. To meet future demand for oil, both private and public companies are seeking to explore new oil reserves.

The objective of the report is to present a comprehensive analysis of theNorth AmericaPup Joint market to the stakeholders in the industry. The report provides trends that are most dominant in the North AmericaPup Joint market and how these trends will influence new business investments and market development throughout the forecast period. The report also aids in the comprehension of theNorth AmericaPup Joint Market dynamics and competitive structure of the market by analyzing market leaders, market followers, and regional players.

The qualitative and quantitative data provided in theNorth AmericaPup Joint market report is to help understand which market segments and regions are expected to grow at higher rates, factors affecting the market, and key opportunity areas, which will drive the industry and market growth through the forecast period. The report also includes the competitive landscape of key players in the industry along with their recent developments in theNorth AmericaPup Joint market. The report studies factors such as company size, market share, market growth, revenue, Product Type, and profits of the key players in theNorth AmericaPup Joint market.

The report provides Porter"s Five Force Model, which helps in designing the business strategies in the market. The report helps in identifying how many rivals exist, who they are, and how their Product Type quality is in theNorth AmericaPup Joint market. The report also analyses if theNorth AmericaPup Joint market is easy for a new player to gain a foothold in the market, do they enter or exit the market regularly, if the market is dominated by a few players, etc.

The report also includes a PESTEL Analysis, which aids in the development of company strategies. Political variables help in figuring out how much a government can influence theNorth AmericaPup Joint market. Economic variables aid in the analysis of economic performance drivers that have an impact on theNorth AmericaPup Joint market. Understanding the impact of the surrounding environment and the influence of environmental concerns on the North AmericaPup Joint market is aided by legal factors.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Crossover pup joints are manufactured from seamless mechanical tube. As with all Crossover products, each piece is marked with a distinctive job number and heat number that is fully traceable. A complete range of sizes (1" to 4.5"), weights (standard or heavy wall), and grades (J-55, N-80, L-80, and P-110) are commonly available from stock in 2", 3", 4", 6", 10", and 12" lengths. Lengths up to 20" are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

A blast joint is shorter in length than standard tubular joint. Built with a heavy wall pipe it is incorporated in the production string to facilitate production across any perforated interval and zone. Blast Joints are manufactured to the following specs connections, lengths, weights and material grade.

Crossover Blast Joints are heavy wall pin by box connectors used in tubing strings and are designed to minimize the effect of external erosive action caused by production fluids. Blast joints are located opposite the location of perforations in the production casing or just below the tubing hanger in sand frac designs. Crossover blast joints are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2” OD. Any length, grade of material, and threading is available at the customers request. Typical lengths are 10" and 20". Both API and Premium threads are available.

Crossover Coarse Thread Tubing Safety Joint provides for emergency recovery of the major portion of the tubing string should it become necessary to abandon the equipment below. Precision left-hand threads facilitate the release of the joint by right-hand tubing rotation. Equipment requiring right-hand rotation should not be used below the Safety joint.

Crossover Straight-Pull/Shear-Out Safety Joint is used between packers in dual and triple completions and in selective completions using Hydrostatic Single-String Packers. It is also used when rotational releasing is not desired. When ran above the upper packer in a single-string completion, however, the shear value should be adjusted to compensate for any hydraulic conditions that exist when the string is landed, or that are created by well treating operations. They are available in keyed and non-keyed configurations.

Crossover rotary shoes are manufactured from specially tempered steel to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore. Each shoe is tailored to fit a particular downhole need and normally is run on the bottom of one or more joints of washover pipe. Shoe design is dictated by whether it cuts on the bottom, on the OD, on the ID, or any combination of these. When hole sizes permit, additional clearances can be cut using side ribs, thus providing greater circulation.

Osteoarthritis, also referred to as Degenerative Joint Disease (DJD), is a progressively worsening inflammation of the joint caused by the deterioration of cartilage. In a healthy joint, cartilage acts as a cushion to allow the joint to move smoothly through its full range of motion. In cases of osteoarthritis, this cartilage cushion begins to break down because of factors such as age, injury, repetitive stress, or disease. The loss of this protective cushion results in pain, inflammation, decreased range of motion, and the development of bone spurs. While any joint in the body can develop osteoarthritis, the condition most commonly affects the limbs and lower spine.

Osteoarthritis can be difficult to detect in its early stages, and often the symptoms do not become apparent until the affected joint is badly damaged. Some dogs can also be very stoic and will hide their pain until it becomes severe. Thus, it is important to monitor middle-aged to senior dogs and those predisposed to osteoarthritis for early signs of joint disease. These signs include:

If you suspect your dog may be exhibiting signs of osteoarthritis, it is important to have your dog evaluated by a veterinarian, who will perform a full physical examination, including palpating your dog’s joints and assessing their range of motion. Your veterinarian may also recommend X-rays of the affected joints, which will help rule out other conditions that can cause similar symptoms. X-rays can also help your veterinarian evaluate the degree of damage to the joint.

Unfortunately, osteoarthritis is a progressive disease and there is no known cure. Preventing the development of osteoarthritis through diet, exercise, and the use of protective joint supplements is the best way to keep your dog’s joints healthy. When osteoarthritis develops, treatment is typically focused on controlling pain, decreasing inflammation, improving quality of life, and slowing the development of the disease. Treatment of osteoarthritis is usually multimodal, meaning that several different therapies are used simultaneously in order to achieve the best outcome.

These are often prescribed to improve function, reduce inflammation, and slow the progression of joint damage. Glucosamine and chondroitin are two common joint supplement ingredients that are used in both humans and dogs. These supplements work by reducing inflammation, promoting healing, and increasing water retention in the cartilage, which provides more cushioning for the joint. Green-lipped mussel (GLM) is another proven joint supplement ingredient for both humans and dogs and contains beneficial nutrients such as omega-3 fatty acids, glycosaminoglycans, and antioxidants. GLM is a powerful anti-inflammatory that can help decrease pain and preserve joint function. Joint supplements are often used as an early intervention and throughout the progression of osteoarthritis because they are safe for long-term use in most patients.

In addition to the use of joint supplements, pain control is a mainstay of osteoarthritis treatment. The most commonly used pain control medications for more severe osteoarthritis are Non-Steroidal Anti-Inflammatory Drugs (NSAIDs). NSAIDs can not only reduce pain, but also decrease inflammation in the joints. However, NSAIDs have significant side effects with continued use, particularly in patients with poor liver or kidney function. Your veterinarian will discuss the risks and benefits of NSAID therapy for your dog, and may recommend regular blood work in order to monitor your dog’s health during NSAID therapy.

Your veterinarian may also recommend other treatment modalities such as physiotherapy, acupuncture, cold laser, and changes in diet. In severe cases, they may recommend surgery to remove damaged tissue from the joint, or even to replace the joint entirely.

No matter what your dog’s joint health looks like, it is important to maintain a healthy weight and active lifestyle. In dogs with osteoarthritis, carrying excess weight on damaged joints is not only painful but can also speed up the process of cartilage breakdown. In healthy dogs, obesity can predispose them to earlier development of osteoarthritis, as well as many other diseases. If your dog is overweight or obese, your veterinarian is your best resource to help you begin a diet and exercise plan to improve your dog’s health.

Osteoarthritis is a painful condition, but fortunately, it can be managed. Maintaining your dog at a healthy weight and identifying signs of joint pain early are the first steps to maintaining your dog’s mobility. Joint supplements may also help manage inflammation and pain, as well as slow the progression of the disease.

"Oil country tubular goods pup joints, made of carbon or alloy steel, welded or seamless, heat-treated or not heat-treated, regardless of end finish, having an outside diameter from 2 3/8 inches to 4 1/2 inches (60.3 mm to 114.3 mm), in all grades, in lengths from 2 feet to 12 feet (61 cm to 366 cm) originating in/or exported from the People"s Republic of China."

Whether it’s catching frisbees mid-air or running up the stairs to sleep in your bed, dogs are usually quite active and happy-go-lucky pets. When you notice your canine not moving like they used to, you might need to start looking into dog joint health issues.

Joint problems are sadly common in canines. Learn what joint issues can impact your dog, how to spot them, and even how to help your dog feel better with natural treatments. This is an important issue that you need to keep on top of if you want your dog to have a healthy, active, and happy life.

Joints are a very important part of your dog’s legs. A joint has a few different components that all have their own critical functions. Here’s a quick overview to help you better understand the joints in your dog’s body.

Connecting bones determine the joint’s stability, making up its structure. Cartilage is a firm connective tissue between the connecting bones that lessens the effects of movement. Damaged cartilage causes the connecting bones to collide, which leads to pain and inflammation. Synovium is a lubricant that allows the bones to glide freely. Ligaments are the connective fibers along the side of the joint, preventing the bones from moving out of place.

Joints allow your dog to move freely, including standing up, laying down, walking, running, sitting, and playing. The joints provide padding that lets them jump and run freely without the bones getting damaged.

Elderly dogs and dogs with certain illnesses and injuries will have less synovium in their joints, causing bone degradation and joint pain, as well as arthritis. A lot of dog breeds are also prone to having joint issues, like German Shepherds.

Dogs can also inherit certain joint diseases. Developmental joint issues mean that your dog has over or underdeveloped bones in their joints. An example is an oversized hip bone in the hip socket will often pop out, making the bones rub together. Degenerative joint diseases, like osteoarthritis, cause arthritis when the cartilage around the bones deteriorates. Joints are difficult to repair once cartilage is damaged, so it’s important to maintain your dog’s joint health in various ways even when they seem healthy.

While dogs often keep an upbeat demeanor and will always appear positive and happy to an extent, you will definitely be able to notice signs and symptoms of joint issues your pup is facing. Joint conditions and arthritis are just too painful for your dog to hide at all times. Here’s what to watch out for.

Lethargic behavior:If your dog usually runs around, plays, and explores, you’ll immediately notice a change in behavior if they are experiencing joint discomfort. A dog that suddenly lays around and seems depressed is most likely experiencing some serious pain that’s not allowing them to enjoy their usual activities. Your pet may also hide, or seek shelter, in an area they deem peaceful to deal with the pain.

Licking the affected joint:Dogs lick things to heal them. When they sense something is wrong, you’ll notice your dog will start licking that area a lot more frequently. They are attempting to relieve some of the pain.

HolistaPet has CBD dog treats specifically made for joint and mobility! Vegan, organic, all-natural, and non-GMO, these treats provide comfort for your pup thanks to the addition of CBD. This is a non-psychoactive phytocannabinoid found in hemp that provides a lot of health benefits to your dog without getting them high.

Your dog has an endocannabinoid system (ECS). This helps them maintain balance or homeostasis. CBD interacts with the receptors in your dog’s ECS. The receptors are in all of their body’s systems, meaning you’ll see CBD’s effects in your dog’s skin, coat, joints, and mood.

Feeding your dog food with glucosamine is helpful for joint health. It’s a natural compound found in cartilage that regulates the synthesis of collagen. Glucosamine is also said to have mild anti-inflammatory effects. Shellfish is a great natural source of this compound, but you can also find it in many treats. Bone gristle or meat cartilage can also do the trick.

You might have this in your spice cabinet at home! This is an orange-colored spice related to ginger. Its primary active ingredient is curcumin, which provides a lot of benefits, including relieving your pup of osteoarthritis symptoms. Dogs don’t have an easy time consuming this spice so feed it to them in paste form by mixing it with water and organic coconut oil.

This is another component of cartilage. Some say it reduces oxidative stress on your dog’s joints. That’s because Vitamin C has been found to accelerate bone healing and increase collagen formation. Feed your dog papaya if you want them to get a good amount of healthy Vitamin C. Blueberries are another great option.

Just like with humans, dogs can stress their joints more when they are overweight or obese. No matter their weight, dogs will have the same cartilage, meaning the bones are being squeezed closer together and the friction is increased when your dog is fatter. Making sure your dog is lean will ensure there’s less pressure on their joints.

Healthy ingredients and dietary supplements will keep your dog’s joints strong. A healthy gut biome is also great for their overall health, including their heart and joints.

Even if your dog is feeling the struggle of joint paint, they should still be stimulated with exercise. Try casual walks and swimming. Dogs with joint problems will have a lot of fun doggy paddling in lakes and ponds.

If your dog is having trouble navigating stairs or jumping, try installing some ramps whenever possible. This will make take some pressure off of their joints. Think ramps to help them get onto the couch without jumping or a ramp that helps them get up to the porch and into the front door.

We went over a few symptoms of joint pain earlier. This includes your dog limping, refusing to put weight on their limb, feeling lethargic, avoiding certain movements and activities, and even being a bit aggressive.

If you notice symptoms of joint pain, you should immediately take your dog to the vet. Joint pain should be checked out by a veterinarian right away so they can offer you helpful stretches, a treatment plan, and any medications to help your dog deal with the condition.

About 25% of dogs will get arthritis, which will affect your joint health and cause them a lot of pain and discomfort. It’s important to catch signs early and make sure to give your dog the proper care to help them maintain their joint health.

If you notice your dog limping or refusing to jump, you should immediately bring your pup to the vet. This will help you get them on a proper treatment plan. Meanwhile, you can also help your dog maintain joint health by giving them natural supplements and CBD.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Tubing pup joints are desiged and manufactured as per API 5CT to be used be adjust height of tubings, and tubing pup joints are made of seamless steel tubings. Material grade of tubing pup joint can be avalialbe in J55, K55, N80, L80 or P110, sizes of tubing pup joint range from 2⅜¡± to 4½¡±, thread of pup joint can be 8RD, 10RD or BTC, and end connection types can be NUE and EUE. length of tubing pup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length of pup joint for special purpose can be available as per order. Tubing pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of tubing pup joint is the same as tubing. Tubing pup joints are internally and externally hydrostatic tested with tension and compression loads, and torque tested, electromagnetically inspected, pup joint is full-body drift and straightness visual inspected, and phosphated and dye-penetrant inspected. and finally painted by machine to ensure excellenct appearance. Finished tubing pup joints are often packed by steel belts in bundles, and then fixed in steel rack for easy transportation.

Casing pup joints are desiged and manufactured as per API 5CT to be used be adjust height of casings, and casing pup joints are made of seamless steel casings. Material grade of casing pup joint can be avalialbe in J55, K55, N80, L80 or P110, sizes of casing pup joint range from 4½¡± to 13⅜¡±, thread of pup joint can be 8RD, 10RD or BTC, length of tubing pup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length of pup joint for special purpose can be available as per order. Casing pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of casing pup joint is the same as casing. Casing pup joints are internally and externally hydrostatic tested with tension and compression loads, and torque tested, electromagnetically inspected, pup joint is full-body drift and straightness visual inspected, and phosphated and dye-penetrant inspected. and finally painted by machine to ensure excellenct appearance. Finished casing pup joints are often packed by steel belts in bundles, and then fixed in steel rack for easy transportation.