pup joint schlumberger for sale

Flow iron pup joints from Cameron deliver maximum total life cycle cost savings, even in the oil and gas industry’s most demanding applications. For all of your flow iron requirements, from high-stage-count hydraulic fracturing to cementing, well testing, and even abrasive flowback, you can count on Cameron for high reliability and low cost.

Flow iron pup joints from Cameron deliver maximum total lifecycle cost savings, even in the oil and gas industry’s most demanding applications. For all of your flow iron requirements, from high-stage-count hydraulic fracturing to cementing, well testing, and even abrasive flowback, you can count on Cameron for high reliability and low cost.

Cameron offers flow iron pup joints in standard 2- and 3-in sizes and lengths from 2 to 10 ft with 1502 hammer wing unions and nonpressure seal threads (NPST).

Pup joints are key components in special drilling operations when specific spacing considerations are required. Our pup joints can be ordered with an 18-degree taper or square shoulder and with pressed

PME integral pup joints are forged by treating iron, heat treatment and machines under strict quality control system. PME Industrial supply flowlines irons pup joint as Schlumberger, Chiksan, WECO, FMC for onshore and offshore usage.

Contact PME today for integral pup joint HS Code, pup joint specs in PDF, well thickness for integral pup joint 5" 10K by Email contact@pmeindustrial.com or call directly +86 138 1899 0736

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Through our subsidiary HOWCO, SCOA provides oil field equipment and services from companies such as Schlumberger, Baker Hughes, Cameron, FMC, and others. The market size of oil field service related businesses is much bigger than that of OCTG distribution.

These J55, L80, N80Q & P110 pup joints are manufactured from seamless Grade J-55, L80 N80Q and P110 mechanical tubing. The API 5CT tubing pup joint is mainly used to adjust the height of the tubing strings. It is also used to adjust the depth of down-hole tools.

In the preferred embodiment, a packer 15 is set above the perforations 13. Packer 15 has an annular resilient member that seals against casing 11. Packer 15 has an inner flow passage, and a tail pipe 17 extends downwardly from packer 15 for a shortdistance. A section of pipe or pup joint 19 extends upwardly from packer 15. A collar 21 connects pup joint 19 to a mandrel 23. Mandrel 23 is a member having a longitudinal internal passage 25 with a closed lower end. A lateral passage 27 in mandrel 23 leads from the bottom of passage 25 to the space between mandrel 23 in casing 11, defined herein as part of a collection chamber or area 28. Mandrel 23 also has a longitudinal flow passage 29 separate from passage 25. Mandrel 23 has a reduced diameter threaded upper portion connected to a pup joint 30.

A section of pipe or pup joint 31 is secured to the large diameter portion of mandrel 23 by collar 33. Pup joint 31 extends upwardly, surrounding the upper portion of mandrel 23, pup joint 30, in a continuation of flow path 29. The area surrounding pup joint 31 is also part of the collection chamber 28. The top of pup joint 30 is secured to a stinger receiver 35. A stinger 37 inserts in stinger receiver 35 and extends upwardly, the receiver 35 having an inner bore continuing passage 25. A section of tubing 39 is secured to stringer 37, it having a longitudinal bore continuing passage 25.

Pup joint 31 is secured by a collar 41 to a section of tubing 43 of larger diameter than tubing 39. The annular space between tubing 39 and tubing 41 continues the flow path passage 29. Referring to FIG. 1a, tubing 43 is secured by a collar 45 to a pup joint 47 having opening 49 at its top. Opening 49 serve as the upper open or discharge end of the flow path passage 29. A deflector 51 surrounds openings 49 a selected annular distance from them. Tubing 39 is secured to a receiver nipple 53.

The mandrel 23, pup joint 31, collars 33 and 41, tubing 43, collar 45, pup joint 47, and deflector 51 make up an assembly that may be referred to collectively as a standpipe 79. Standpipe 79 is shown schematically in FIGS. 2-5. The lower end of production tubing 57 will be defined herein to include passage 25 in mandrel 23, pup joint 30, stinger receiver 35, stinger 37 and tubing 39. The lower end of tubing 57 will be considered the lower end of longitudinal passage 25. The lower end of tubing 57 is closed to fluid coming up the tail pipe 17, but is open to fluid in the collection area surrounding the standpipe 79 and above packer 15 through lateral passage 27.

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

Integral → The pup joints are one-piece construction made from alloy steel and feature wing union end connections that eliminate welds and threads. The pup joints are capable of handling a variety of fluids and a working pressure of 15,000 psi. Available in lengths up to 15 feet, they are pressure rated to 10,000 psi for sour gas service.