pup joint suppliers in uae in stock

Prefabricated Pup joints & fittings are used for temporary operations and removable piping systems. Each component is fitted with wing union ends for fast and easy installation. Commonly used in upstream oil & gas well sites, it can be useful in all industrial applications.

Multiphase oil and gas well effluent, drilling fluids, water, chemicals, abrasive and corrosive fluids, cement, refined hydrocarbons, hydraulic oil, etc.

Each element is serialised and data is engraved onto individual stainless steel collar. Pressure rating is easily identified with stenciled or painted colour band(s) and rating markings.

Six combinations of equal tee fittings are available. When ordering tees, specify your requested position of male and female ends from left to right and perpendicular branch (M for male, F for female) as shown on figure: 1 x 2 x 3.

Special formats may be required in some piping systems such as wyes, laterals and crosses. FCE manufactures special fittings to client requirement comprising special shapes or specific materials.

FTE supplies racked containers to customer requirements which offer easier storage and ergonomic access. Proper racking also provides protection and an easier visual check of piping elements.

The tie-down clamp is one of the piping accessories supplied by Flow Test Equipment. The use of tie-down clamps may protect against severe damage and serious personal injury in case of unexpected failure under pressure and flowing conditions.

Incorrectly tighten union because of damaged threads makes the use and operation unsafe. Essential care by protecting threads during handling will improve your safety level. Hard plastic ACME thread protectors for wing unions are available.

We are one of the prominent Suppliers and Exporters of Tubing Pup Joints in UAE. Tubing pup joints produced according to API 5CT Specification. Our precision-engineered tubing pup Joints are ideal for spacing out down-hole assemblies and handling the production of tubing accessories. We supply tubing pup joints in all sizes and grades. All our products have passed the ISO certification and API certifications.

We are highly appreciated among our clients for providing the best quality tubing pup joints and other oilfield equipment. Our products are tested numerous times under technical guidance and are made from the best quality material. Standard and non–standard sizes are available as per customer requirements.

The companies listed above have not approved or sponsored Panjiva"s provision of any of the information in these search results. These results are derived from various public and private data sources. These results have not been confirmed by Panjiva and are provided on an "AS IS" basis, as further described in Panjiva"s Terms and Conditions of Use and Panjiva"s Transparency Policy. Your use of the information provided in these results is subject in all respects to those Terms and Conditions of Use.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

CountryAfghanistanAland IslandsAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntarcticaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijanBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBosnia and HerzegovinaBotswanaBouvet IslandBrazilBritish Indian Ocean TerritoryBritish Virgin IslandsBruneiBulgariaBurkina FasoBurundiCambodiaCameroonCanadaCape VerdeCayman IslandsCentral African RepublicChadChileChinaChristmas IslandCocos (Keeling) IslandsColombiaComorosCongo (Brazzaville)Congo (Kinshasa)Cook IslandsCosta RicaCroatiaCubaCuraçaoCyprusCzech RepublicDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFalkland IslandsFaroe IslandsFijiFinlandFranceFrench GuianaFrench PolynesiaFrench Southern TerritoriesGabonGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHeard Island and McDonald IslandsHondurasHong Kong S.A.R., ChinaHungaryIcelandIndiaIndonesiaIranIraqIrelandIsle of ManIsraelItalyIvory CoastJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKuwaitKyrgyzstanLaosLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacao S.A.R., ChinaMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueMyanmarNamibiaNauruNepalNetherlandsNetherlands AntillesNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorfolk IslandNorthern Mariana IslandsNorth KoreaNorwayOmanPakistanPalauPalestinian TerritoryPanamaPapua New GuineaParaguayPeruPhilippinesPitcairnPolandPortugalPuerto RicoQatarReunionRomaniaRussiaRwandaSaint BarthélemySaint HelenaSaint Kitts and NevisSaint LuciaSaint Martin (French part)Saint Pierre and MiquelonSaint Vincent and the GrenadinesSamoaSan MarinoSao Tome and PrincipeSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth Georgia and the South Sandwich IslandsSouth KoreaSpainSri LankaSudanSurinameSvalbard and Jan MayenSwazilandSwedenSwitzerlandSyriaTaiwanTajikistanTanzaniaThailandTimor-LesteTogoTokelauTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTurks and Caicos IslandsTuvaluU.S. Virgin IslandsUgandaUkraineUnited Arab EmiratesUnited KingdomUnited StatesUnited States Minor Outlying IslandsUruguayUzbekistanVanuatuVaticanVenezuelaVietnamWallis and FutunaWestern SaharaYemenZambiaZimbabwe

Manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Optional diameters, lengths, weights, and grades are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

Upset forging is a process by which a plain end blank is upset at each end to increase the cross section area. We have innovated upsetting by automating our handling table. This automated handling table not only helps us upset at different lengths safely, but also helps us to get pup joints to the highest degree of consistency and accuracy.

The hydro tests all of its pup joints. This non-destructive test uses water pressure and a pressure recorder to determine possible leaks. Our modernized tester can be adjusted to accommodate various lengths of pup joints, and test them at various pressures as required by API and customer specifications.

We has a custom & automated Full Body Ultrasonic Inspection system to inspect its tubing pup joints. We are the first in the industry to build and use a Full Body Ultrasonic Inspection for pup joints to ensure there are no defects on the external and internal surface longitudinal and transverse.

This inspection has greater accuracy than other non destructive tests, one reason is its high penetrating power to allow detection of defects deep in the pup joints. The Full Body UT also has high sensitivity which allows it to detect exceptionally small deficiencies. This inspection ensures that our customers receive the best quality pup joints on the market.

We also manufacture pup joints by profiling from heavy wall mechanical tubing. Profiling of pup joints are done in a high precision and tolerance CNC in order for us to achieve a high level of dimensional tolerances and surface finish.

The wet magnetic particle test is a non-destructive test that detects surface and shallow subsurface defects. Pup joints are inspected for longitudinal and transverse defects using this inspection method.

We have exclusively designed a line which heat treats each pup joint individually. This setup is versatile and dynamic, as it can be adjusted for various lengths of pup joints and modified accordingly. This gives us the advantage of catering to the needs of our customers extremely quickly. All pup joints are re-straightened after heat treat to ensure the highest quality.

Shanghai Hilong Shine New Material Co is the only R&D-oriented production enterprise in China specialising in oilfield-dedicated coating materials and new materials. It supplies the Hilong Petroleum Company in Abu Dhabi with its world-class Tube Coat range of interior anti-corrosion special coating materials for drill pipes, casing, and tubing. In turn, Hilong Petroleum Pipe Company has an advanced steel pipe interior and exterior coating production line with an annual designed coating area exceeding eight million m².

Tube Supply stocks a variety of sizes in tubular form in these grade categories. All grades are in compliance with API 5CT mechanical and impact testing expectations, including ultrasonic testing.

Pup joint is designed and manufactured to adjust height of tubing or casing strings or depth of down-hole tools, and these pup joints are made of seamless steel pipes, and material for pup joint can be available in J55, K55, N80, L80 or P110. Pup joint can be available with tubing pup joint or casing pup joint, sizes of tubing pup joint range from 2⅜ inch to 4½ inch , and casing pup joint range from 4½ inch to 13⅜ inch , thread of pup joint can be 8RD, 10RD or BTC, length of tubingpup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length for special purpose can be available as per order. Pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of tubing pup joint is the same as tubing, and casing pup joint is the same as casing.

Nr. SBI, Mamsa GIDC, Bhavnagar Survey No. 174, Plot No. 23,Mamsa-364070, TA-Ghogha, Dist. Bhavnagar (Guj.) India, Nr. SBI, Mamsa GIDC,, Bhavnagar - 364002, Dist. Bhavnagar, Gujarat

Gautam Budh Nagar Villa No 67, Lotus Villas Society, Opp Kc International School Jalpura Greater Noida, Gautam Budh Nagar - 201306, Dist. Gautam Budh Nagar, Uttar Pradesh

Vasai East, Vasai, Dist. Thane Gala No. 7, Bldg No. A, Swami Industrial Centre, Gaurai Pads, Vasai East, District Palghar, Vasai East, Vasai - 401208, Dist. Thane, Maharashtra

ADFO manufactures Pup Joints with Integral Hammer Union end connections.These Pup Joints are used on high pressure discharge lines, choke and kill lines, auxiliary flow and other applications.

Meerut Road Industrial Area, Ghaziabad C-23, Meerut Road Industrial Area, Meerut Road Industrial Area, Ghaziabad - 201003, Dist. Ghaziabad, Uttar Pradesh

Prithviraj Industries manufactures Pup Joints up to 20, 000 psi cold working pressure in sizes: 1, 11 /2, 2, 3, and 4-inch bore sizes, lengths to 20 feet.

Shreeraj Industries offers NPST (Non-pressure Seal Thread) Pups in size 1-3 Fig 602 and 1502. The NPST connection offers a light weight pup capable of 6000-15000 CWP with a connection that isolates the thread from fluid’s flowpath. This connection is permanent and is well suited to abrasive applications where a weldedread more...

- Grant Prideco pup joints are manufactured from the same material as our drill collars. Heat-treatment processes ensure a hardness range of 285-341 Brinell. Charpy V minimum impact strength of 40 ft-lb at 70° F are guaranteed one inch below the surface.

Windlass manufactures Pup Joints with integral hammer lug union end connections. This enables faster, easier make-up and break-out of temporary flow lines.

These J55, L80, N80Q & P110 pup joints are manufactured from seamless Grade J-55, L80 N80Q and P110 mechanical tubing. The API 5CT tubing pup joint is mainly used to adjust the height of the tubing strings. It is also used to adjust the depth of down-hole tools.

Alibaba.com offers 358 api tubing steel pup joint products. About 16% % of these are seamless steel pipes, 10%% are other steel pipes, and 4%% are other oil field equipments.

A wide variety of api tubing steel pup joint options are available to you, such as energy & mining, construction works  and manufacturing plant.You can also choose from unavailable, 1.5 years and 6 months api tubing steel pup joint,As well as from provided, {2}, and {3}. and whether api tubing steel pup joint is kazakhstan, russia, or egypt.

Windlass Engineers and Services Private Limited is an ISO 9001:2015 and API – 6A, 16A, 16C, 16D and 20E Licensed company of Windlass Group of Companies.

Windlass Engineers and Services Private Limited is started by Mr. Sudhir Windlass, the Director of the company, in December 2006. Since then it is striving to excel in manufacturing of oil field equipment and providing related services. Windlass Engineers and Services Private Limited is targeting its customers across the world as well as home market of India. Located on the Haridwar Road, Dehradun, India Windlass Engineers and Services Private Limited (WES) uses the state-of-the-art manufacturing processes manned by qualified and experienced team.

We manufacture: BOP Control Units, Test Units, Water Blaster, Flanges, Crosses, Tees, Ring Joint Gaskets, Adapter and Spacer Spools, Studs and Nuts, Valves, Double Studded Adapter Flange, Drilling Spools, Clamps, Hubs, Hammer Unions, Swivel Joints, Pup Joints, Plug Valves, Manifolds and B/W Fittings. These products are manufactured in accordance with API (American Petroleum Institute) Specifications – 6A, 16A, 16C, 16D and 20E. Our complete range of Hammer Unions, Swivel Joints, Pup Joints, Fittings & Plug Valves are certified as per CE-PED 2014/68/EU Module H.

With our service locations fast coming up in USA, Jakarta, Singapore, Dubai and Muscat, WES will have customer’s equipment serviced with minimum downtime. We also have technicians capable of providing service at any international location across the world.