pup joint weight quotation

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Crossover pup joints are manufactured from seamless mechanical tube. As with all Crossover products, each piece is marked with a distinctive job number and heat number that is fully traceable. A complete range of sizes (1" to 4.5"), weights (standard or heavy wall), and grades (J-55, N-80, L-80, and P-110) are commonly available from stock in 2", 3", 4", 6", 10", and 12" lengths. Lengths up to 20" are available upon request.

Manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Optional diameters, lengths, weights, and grades are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

A blast joint is shorter in length than standard tubular joint. Built with a heavy wall pipe it is incorporated in the production string to facilitate production across any perforated interval and zone. Blast Joints are manufactured to the following specs connections, lengths, weights and material grade.

Crossover Blast Joints are heavy wall pin by box connectors used in tubing strings and are designed to minimize the effect of external erosive action caused by production fluids. Blast joints are located opposite the location of perforations in the production casing or just below the tubing hanger in sand frac designs. Crossover blast joints are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2” OD. Any length, grade of material, and threading is available at the customers request. Typical lengths are 10" and 20". Both API and Premium threads are available.

Crossover Coarse Thread Tubing Safety Joint provides for emergency recovery of the major portion of the tubing string should it become necessary to abandon the equipment below. Precision left-hand threads facilitate the release of the joint by right-hand tubing rotation. Equipment requiring right-hand rotation should not be used below the Safety joint.

Crossover Straight-Pull/Shear-Out Safety Joint is used between packers in dual and triple completions and in selective completions using Hydrostatic Single-String Packers. It is also used when rotational releasing is not desired. When ran above the upper packer in a single-string completion, however, the shear value should be adjusted to compensate for any hydraulic conditions that exist when the string is landed, or that are created by well treating operations. They are available in keyed and non-keyed configurations.

A saver sub falls under the drill string accessory tool category and a short pipe that is replaceable and expendable without a major investment. This accessory protects the Kelly or topdrive component threads and those components represent a significant capital cost and considerable downtime when replaced. Saver sub are manufactured to the following specs connections, lengths, weights and material grade.

A lift sub falls under the drill string accessory tool category and utilized to mobilize various tools during drilling or fishing operations. Lift Sub are manufactured to the following specs connections, lengths, weights and material grade.

A circulating sub falls under the downhole accessory tool category that regulates flow rates, especially drilling in slimhole wells or wellbore cleanout projects. Circulating sub is manufactured to the following specs connections, lengths, weights and material grade.

A side-entry sub falls under the drilling tool accessory category to allow various drilling, fishing, wireline operations through drill pipe without interference from the rig"s top drive unit. Circulating sub is manufactured to the following specs connections, lengths, weights and material grade.

A washover pipe is Casing or Pipe shorter in length than a standard tubular string. Made of large-diameter pipe with a cutting surface at the tip, washover pipe is run in the well and then the cutting edge grinds the fish to a smooth surface and continues normal operations. Washover Pipe is manufactured to the following specs connections, lengths, weights and material grade.

Crossover rotary shoes are manufactured from specially tempered steel to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore. Each shoe is tailored to fit a particular downhole need and normally is run on the bottom of one or more joints of washover pipe. Shoe design is dictated by whether it cuts on the bottom, on the OD, on the ID, or any combination of these. When hole sizes permit, additional clearances can be cut using side ribs, thus providing greater circulation.

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

If you’re looking for pup joints, we provide tubing and casing pup joints of all sizes, grades, and thread profiles to meet any requirements set by our customers. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Made with the highest-quality materials and powder coated (if desired) to protect against the harshest chemicals and environments, we’ll go above and beyond to ensure customer satisfaction.

OCPL offers a wide range of OCTG Casing Pup Joints, with both API and premium threads, manufactured at our select API spec. 5CT compliant steel mills.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Pup Joints are manufactured from AISI 4145H or 4140H-modified alloy, heat-treated to Hardness range of 285-341 with a Charpy "V" notch minimum impact strength of 40 ft/lb at 70° F and one inch below the surface. Pup Joints are heat-treated to 110,000 PSI minimum yield. All connections are phosphate coated to impede galling during initial make-up.

4” PUP JOINTPUP JOINT 4″ WITH NC40 (4 ” FH) CONNECTION, LENGTH 5 FEET, TOOL JOINT 5-3/8” OD X 2-7/16” ID, WITH TC2000 PLASTIC INTERNAL COATING C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINT 4″ WITH NC40 (4 ” FH) CONNECTION, LENGTH 10 FEET, TOOL JOINT 5-3/8” OD X 2-7/16” ID, WITH TC2000 PLASTIC INTERNAL COATING C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINT 4″ WITH NC40 (4 ” FH) CONNECTION, LENGTH 15 FEET, TOOL JOINT 5-3/8” OD X 2-7/16” ID, WITH TC2000 PLASTIC INTERNAL COATING C/W PRESS STEEL PROTECTORS ON BOTH ENDS

3 1/2″PUP JIONTPUP JOINT 3 1/2″ WITH NC38 ( 3-1/2″ IF) CONNECTION, LENGTH 5 FEET, TOOL JOINT 5” OD X 2-7/16” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

3 1/2″PUP JIONTPUP JOINT 3 1/2″ WITH NC38 ( 3-1/2″ IF) CONNECTION, LENGTH 15 FEET, TOOL JOINT 5” OD X 2-1/8” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

2 7/8″ G-105 PUP JIONTPUP JOINT 2 7/16″ WITH NC31 ( 2-7/8″ IF) CONNECTION, LENGTH 5 FEET, TOOL JOINT 4 1/8” OD X 2” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

2 7/8″ S-135 PUP JIONTS-135 PUP JOINT 2 7/8″ WITH NC31 ( 2-7/8″ IF) CONNECTION, LENGTH 5 FEET, TOOL JOINT 4 3/8” OD X 2” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINTPUP JOINT 3 1/2″ WITH NC38 ( 3-1/2″ IF) CONNECTION, LENGTH 5′,10′ 15’FEET(ONE EACH), TOOL JOINT 5” OD X 2-7/16” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS;

PUP JOINT 2 3/8″ WITH NC26 ( 2-3/8″ IF) CONNECTION, LENGTH 5′,10′ 15’FEET(ONE EACH), TOOL JOINT 3 3/8” OD X 1-3/4” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINTS 3 ½”ODPUP JOINTS 3 ½”OD, 15.5 LB/FT, GRADEG105SS, NEW AND UNUSED,4 1/8”TOOLJOINTS (120 KSI) AND NC31 CONNECTION     5’LONG; FOR ABOVE PIPES

PUP JOINTS 2 7/8 ”ODPUP JOINTS 2 7/8 ”OD, 10.4  LB/FT, GRADEG105SS, NEW AND UNUSED,3 1/8”TOOLJOINTS (120 KSI) AND NC31 CONNECTION     5’   LONG; FOR ABOVE PIPES

Lift Plugs are small easy-to-handle subs that make up to the top of the drill collars. They have a lifting flange that serves as a safety stop when drill collars without elevator recesses are being tripped out of the hole. The center section of the Lift Plugs are bored out to reduce weight for easy handling.

AOS pup joints are machined from integral bars of chromium molybdenum alloy steel heat treated to drill collar specifications. Pup joints with tool joint OD less than 6 7/8” have a minimum yield strength of 110,000 psi. Pup joints with tool joint OD 6 7/8”and larger have a minimum yield strength of 100,000 psi.

Pup joints are available in 5’, 10’, 15’ and 20’ lengths and can be ordered to match standard drill pipe dimensions. The primary use of the pup joints is to adjust the overall length of the drill string to land at a specific depth while staying within the working area of the Kelly.

Integral Pup Joints are high pressure fluid control situation. They are widely used in acidic operating environment in the high pressure pipelines. Integral Pup Joints are made from high strength steel, with a special toughening process. It uses Acme threaded connection, making it with the demolition convenient, fast and reliable. Multiple seal design and high precision is to ensure the sealing performance of the product.

Manufacturer of pressure, rig concept, well intervention, drilling, down-hole and tubular products. Pressure products include centering shear and fixed bore pipe rams, blowout preventers, diverter systems, connectors, check and gate valves, chokes, actuators, flow heads, manifolds, catchers, packers, hydrate seals, casing heads, casing and tubing head spools, adapters, and hangers. Rig concept products include rig packages, derricks, masts, and skidding systems. Drilling products include electric and hydraulic top drives, makeup/breakout units, pipe handling units, cabins, operation stations, chairs, automatic drillers, anti-collision systems, and navigators, and draw works. Down-hole products include coiled tubing orienteers, drilling motors and jars, and survey and shock tools. Tabular products include drill pipe connections, collars, Kelly�s, subs and pup joints, and pipes.

ADFO manufactures Pup Joints with Integral Hammer Union end connections.These Pup Joints are used on high pressure discharge lines, choke and kill lines, auxiliary flow and other applications.

Prithviraj Industries manufactures Pup Joints up to 20, 000 psi cold working pressure in sizes: 1, 11 /2, 2, 3, and 4-inch bore sizes, lengths to 20 feet.

Shreeraj Industries offers NPST (Non-pressure Seal Thread) Pups in size 1-3 Fig 602 and 1502. The NPST connection offers a light weight pup capable of 6000-15000 CWP with a connection that isolates the thread from fluid’s flowpath. This connection is permanent and is well suited to abrasive applications where a weldedread more...

- Grant Prideco pup joints are manufactured from the same material as our drill collars. Heat-treatment processes ensure a hardness range of 285-341 Brinell. Charpy V minimum impact strength of 40 ft-lb at 70° F are guaranteed one inch below the surface.

Windlass manufactures Pup Joints with integral hammer lug union end connections. This enables faster, easier make-up and break-out of temporary flow lines.