pup joint yield strength api pricelist

A pup joint is a casing or tubing of length shorter than Range 1 with the same thread connection, used to adjust the length of tubular strings to its exact requirement.

Pup Joints are manufactured from AISI 4145H or 4140H-modified alloy, heat-treated to a Brinell Hardness range of 285-341 with a Charpy “V” notch minimum impact strength of 40 ft/lb at 70° F and one inch below the surface. Pup Joints are heat-treated to 110,000 PSI minimum yield. All connections are phosphate coated to impede galling during initial make-up.

Integral Pup Joints dedicated to Sour Service applications are available. PJ -110 PUP S are Sour Service Pup Joint using ASCOWELL C material providing improved resistance to Sulfide Stress Cracking with high yield strength.

Pup joint is used be adjust height of tubing or casing strings or depth of down-hole tools, and these pup joints are made of seamless steel pipes. Pup joint can be available with tubing pup joint or casing pup joint, and material for pup joint can be avalialbe in J55, K55, N80, L80 or P110, sizes of tubing pup joint range from 2⅜¡± to 4½¡±, and casing pup joint range from 4½¡± to 13⅜¡±, thread of pup joint can be 8RD, 10RD or BTC, length of tubing pup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length of pup joint for special purpose can be available as per order. Pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of tubing pup joint is the same as tubing, and casing pup joint is the same as casing.

Tubing pup joints are desiged and manufactured as per API 5CT to be used be adjust height of tubings, and tubing pup joints are made of seamless steel tubings. Material grade of tubing pup joint can be avalialbe in J55, K55, N80, L80 or P110, sizes of tubing pup joint range from 2⅜¡± to 4½¡±, thread of pup joint can be 8RD, 10RD or BTC, and end connection types can be NUE and EUE. length of tubing pup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length of pup joint for special purpose can be available as per order. Tubing pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of tubing pup joint is the same as tubing. Tubing pup joints are internally and externally hydrostatic tested with tension and compression loads, and torque tested, electromagnetically inspected, pup joint is full-body drift and straightness visual inspected, and phosphated and dye-penetrant inspected. and finally painted by machine to ensure excellenct appearance. Finished tubing pup joints are often packed by steel belts in bundles, and then fixed in steel rack for easy transportation.

Casing pup joints are desiged and manufactured as per API 5CT to be used be adjust height of casings, and casing pup joints are made of seamless steel casings. Material grade of casing pup joint can be avalialbe in J55, K55, N80, L80 or P110, sizes of casing pup joint range from 4½¡± to 13⅜¡±, thread of pup joint can be 8RD, 10RD or BTC, length of tubing pup joint are often offered in 2ft, 3ft, 4ft, 6ft, 8ft, 10ft and 12ft, length of pup joint for special purpose can be available as per order. Casing pup joints are machined with interchangeable Pin & Box thread on two ends or other configuration, one end is equipped with coupling, and another end is protected with closed end thread protector. Nominal weight of casing pup joint is the same as casing. Casing pup joints are internally and externally hydrostatic tested with tension and compression loads, and torque tested, electromagnetically inspected, pup joint is full-body drift and straightness visual inspected, and phosphated and dye-penetrant inspected. and finally painted by machine to ensure excellenct appearance. Finished casing pup joints are often packed by steel belts in bundles, and then fixed in steel rack for easy transportation.

ll pump joints are made from modified alloy steel heat-treated to a Brinell Hardness range of 285–341 with a Charpy V-Notch minimum impact strength of 40 ft-lbs at 70°F guaranteed to one inch below the surface Connections can be cold rolled after machining, if requested All connections are phos-coated to prevent galling during initial make-up

API Spec 5CT – This Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H.

All kinds of Casing and Tubing Jfe Nsct Pup Joint for OCTG produced by our company have reached the national standards. We keep on with our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We hope to gain the trust and support of our customers, employees, communities and other stakeholders, and work together to make our company stronger, better and bigger.

The upset (thread-end finish) refers to the wall of the tool joint at the threaded connection. Drill pipe is offered with an internal upset (IU), an external upset (EU), or an internal-external upset (IEU).

8. Our tubing pup joint conform to API 5 CT standards, Length: 2FT/3FT/4FT/5FT/6FT/8FT/10FT/12FT and we can make different lengths and sizes according to the customer"s requests.

KINGWELL have experienced team, stronger enough to meet any challenge, we do believe honest is the base of business and cooperation, our aim is to build solid relationship with any part of honest. kingwell can provide highly efficient services to its clients resulting in accurate and timely deliveries at the best prices.is a professional supplier for oilfield products according to the API standard. We exporting ALL KINDS OF OILFIELD MACHINERY AND TOOLS with super Quality and Competitive Price in CHINA.

The pup joint are used to adjust the height of full length tubing or casing strings, they are also used to adjust the depth of downhole tools.Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin withcouplings hand tight Pin-by-Coupling Box Flush joint connections

Now, Our Pup Joints have exported to USA, Egypt, India and UEA , etc with high quality and short supply and good service. Our PUP JOINThas got good reputation home and abroad Here we got some prise as follows.

A well-established Quality System from Materials receipt to Products delivery ensures consistent quality at all levels of the activity. QMS Procedures & Measurements are tailored to establish high standards of Quality Assurance in the Operations. The Company maintains the 100% Traceability records as per API requirements&NACE MR 0175-2002 Standards and complies with all the legal, statutory and regulatory requirements.

Our TUBING PUP JOINT cover all API Standard scope from 2-3/8" - 4-1/2" with strickly inspection, which all the goods should be checked one by one before packing. Euipped withthe world-class facilities and professional laboratory technicians, we pay more attention the quality of every products.

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Pup Joints are a mandatory part of equipment in almost any well. Due to their shorter length, they are typically easier to handle and to use. At the same time, they provide the same performance as the tubing/casing/drill pipe that they are attached to.

Tubos India is one of the large manufacturers for high quality API 5CT T95 Casing Pipes. API 5CT T95 Casing Tubing used for transport both crude oil and natural gas from oil and gas layer to the surface pipeline after drilling is completed. It has the ablility to bear the pressure produced by the exploitation process. Our oilfield tubing & API 5CT Grade T95 Casing Pipe can be widely applicable to construction, petroleum, smelting, shipbuilding, aviation, food, electric power, paper, medical equipment, chemical industry, boilers, heat exchangers, metallurgy.

T95 Casing is placed downhole to provide structural integrity to the wellbore and must withstand external collapse pressure from rock formation and internal yield pressure from gases and fluids. It also must hold its own deadweight and withstand the transaxial pressure and torque placed on it while running downhole.

Despite all the American Petroleum Institute (API) specifications and testing, some tubing defects are still found after delivery; thus, some operators do further inspection.

GroupGradeTypeTotal elongation under load %Yield strength MPaTensile strength min. MPaHardness a max.Specified wall thickness mmAllowable hardness variation b HRC

API 5CT T95 Casing Tubing is offered with a free length range from 8 to 13m on basis of the SY/T6194-96 norm. However, it is also available no less than 6m length and its quantity should be no more than 20%.

The surface of thread of coupling and API 5CT T95 Casing Tubing should be smooth without any burr, tear or other defects that may have a negative impact on the strength and close connection.

The API 5L is a specification which delivers standards for pipes. The API 5L Erw Pipe constructed under this specification are considered to be well suited for certain types of uses. Generally, the API 5L Line Pipe is typically used in applications that are based in industries such as in the oil and natural gas industries especially in the conveying of fluid like water and oil. The API 5L Seamless Pipe can also be used in the transportation of steam and gas as well. The API 5L standard covers two kinds of pipes i.e. seamless and the steel line API 5L Welded Pipe. Fusion bond epoxy powder coating, also referred to as FBE coating is one finish that is widely used in order to protect the steel API 5L Seamless Pipe used in pipeline construction against corrosion. Hence, this FBE API 5L PSL1 Pipe Coating tends to have good corrosion resistance properties, while being set as a standard which is followed in the manufacture of these pipes. While the PSL 1 grade pipes are considered to be a standard, the API 5L PSL2 grade 2 pipes prove to be of a much better quality. This is because the specified API 5L NACE MR0175 Pipe PSL 2 grade have routine and stricter quality checks during production. In addition to this PSL2 grade pipes have to adhere to the rather strict chemical as well as mechanical specifications of the technical committee. If you are looking to purchase good quality, sturdy and durable API specified 5L pipes, you can get in touch with us. At Trident Steel & Engg. Co., we offer FBE Coated API Pipeline at reasonable price in India. We are one of the leading supplier, exporter of API 5L Pipe in India.

Square Cut, Deburring, Screwed, Squared Ends, Plain end (PE), Pub Joints, Threaded Ends (Male & Female), Grooved, Cut Grooves, Vibrator Grinding, Chamfering, Thread Cutting, Coupling, Flanged Ends, Beveled End (BE), Buttweld, Socket

NACE MR0103, destructive, NACE MR0175, EN 10204 3.2, Ultrasonic Testing (UT), N5, nondestructive, NDE, EN 10204 3.1, E/I, ISO10893-8, API 2B, ASTM A252, Radiographic Testing (RT)

These both are corbon steel pipes but API 5L Pipe is Specification 5L for Line Pipe has 2 grades A & B along with product service level (PSL 1 / PSL2). ASTM A106 standard specification for seamless carbon steel pipe for high-temperature and pressures service.

These API 5L Line pipes are available in various grades in PSL1 and PSL2, these pipes are used for transportation of combustible fluids on land, transmissions of high pressure gas for for sour services, corrosion service, extreme cold and H2S environments.

Are you looking for P110 Material specification and 5CT P110 Casing Tubing Chemical Composition ? find here. ISO Certifed API 5CT P110 Casing Tube Supplier in India

Tubing is specified by grade, outer diameter, weight, and connection. API tubing grades correspond to casing grades with the exception that P grade tubing has a tensile strength of 105,000 psi and is referred to as P105.

Tubing comes with non-upset (NUE) and external upset (EUE) ends. EUE tubing is more common, because of the benefit that cutting threads into the tubing ends does not reduce the body strength.

The drift diameter: is the diameter of a 42”long mandrel that passes through tubing joint. It is a foremost parameter as it gives the maximum OD of any equipment to run through the tubing string.

The tubing joint length: is the length of tubing joint including the coupling and excluding the pin thread. It is classified into two length range: range I: from 20 ft to 24 ft (6.1 to 7.32 m) long, or range II: from 28 ft to 32 ft (8.53 to 9.75 m) long. The length range must be chosen with care. It must be compatible with the hoisting and storage capacity of the mast of the rig used when running in hole the equipment during completion as well as later on during workover operations.