weco pup joint dimension in stock

Now there’s a new Lightweight Fittings family that is ideal for handling a complete range of well servicing fluids at cold working pressures to 20,000 psi. Available in 1- to 4-inch sizes, FMC fittings feature high-quality forged construction with integral Weco wing union end connections for a high-strength, high-integrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation. Like other FMC flowline products, FMC’s Integral Fittings come with full material traceability and can be supplied with Charpy impact values.

High pressure Pup joint is a kind of pressure pipe with hammer union end or flange end connection,the high pressure pup joint can be made integral or weld type which end connection is welded to pipe. Cost of Intergal type is higher than welded type.

Hammer union end connection pup joint is designed to interchangable with weco wing union, including Fig100, Fig206, Fig207, Fig602, Fig1002, Fig1502, Fig2002, Fig2202 and etc.

Flange end connection pup joint is designed according to API 6A or ASME standard. Working pressure of pup joint is from 2,000 psi to 20,000psi.Manufacturing theory is according to API 16C Our company supply the high pressure weco pup joints are four types:pressure thread seal,

Professional manufacturing:high-strength drilling hose (hose), flexible choke and kill pipeline, gas release pipeline, special fracturing composite hose, high-pressure, fire-resistant and thermal insulation hose assemblies, high, medium and low pressure joints, pneumatic pipes Joints, sliding steel joints, high pressure rigid pipes, high pressure elbow joints, high pressure tee, four-way tee, integral joint, diverter joint, mud gate valve, plug valve, check valve, assembly pipe, quick joint, elastic rubber joint , Drilling platform skid plate, various nylon, polyurethane, rubber sealing products and other oil drilling, cementing, fracturing equipment parts.

The pup joints manufactured and offered by MSI FZC are of different constructions to match the requirements of the clients.They can be integral, or NPST (Non Pressure Seal Thread), LPT(Line Pipe Thread) or welded.

High pressure Pup joint is a kind of pressure pipe with hammer union end or flange end connection,the high pressure pup joint can be made integral or weld type which end connection is welded to pipe. Cost of Intergal type is higher than welded type.

Hammer union end connection pup joint is designed to interchangable with weco wing union, including Fig100, Fig206, Fig207, Fig602, Fig1002, Fig1502, Fig2002, Fig2202 and etc.

Flange end connection pup joint is designed according to API 6A or ASME standard. Working pressure of pup joint is from 2,000 psi to 20,000psi.Manufacturing theory is according to API 16C. Our company supply high pressure weco pup joints with four types:

Pup joints size : 1″~4″, Working pressure: 7MPa~150MPa, Length of the pup joint: 1m. , 1.5m, 2m, 2.5m, 2.8m. High-pressure straight pipes of various sizes and pressures as well as acidic environments are available upon request. Application: Fracturing manifold, cementing manifold, maintenance manifold, test manifold, high-pressure well service flowlines, fracturing flowlines, well testing flowlines, cementing and circulating flowlines etc.

FMC Weco Unions and Valves undergo rigid quality control and therefore provide the most reliable pressure-tight positive sealing designs. Weco unions are simple to identify and has the widest selection in the oil and gas industry. They also make use of interchangeable parts. Hence, Weco unions are easy to maintain or replace.

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.