6 rotary table price

WARNING:WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos For more information go tohttps://www.p65warnings.ca.gov/

6 rotary table price

1.Our Tables are made of high density Meehanite and use "HEIDENHAIN" electronic equipment to inspect angle to assure the excellent quality and durableness.

3.Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 2"min. And vernier scale makes settings down to 10 seconds possible.

4.These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work.

6 rotary table price

Prop 65 Warning(s)Many metalworking products contain chemicals or metals included in the latest Prop 65 warning. Exposure may cause cancer and reproductive harm. KBC is currently gathering required California Prop 65 warnings for our customers. For more information go to www.P65Warnings.ca.gov

6 rotary table price

Drill holes and bolt-hole patterns, mill intersecting slots and curved slots precisely. Includes worm drive hand wheel with Vernier ring for 4-degree table movement per turn, three T-slot ways for easily mounting a chuck, and two table clamp handles for stability. Main body mounts horizontally and vertically. You will need the table, tailstock, and chuck to complete your rotary table. The 6” table is a complete pack including the dividing plates and the tailstock. The 8” table takes 1/2” T-slot nuts (35-110) and has an MT3 bore. The 6" table uses 10 mm t-slot nuts and has an MT2 bore.

6 rotary table price

The mill rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring, etc. The rotary turn table for milling machine is made from casting with high quality, can work with a set of dividing plate.

Both vertical and horizontal with two functions. Circle cutting, indexing drilling, milling and more complicated work are possible when the vertical position of the table is used together with the tail part.

Three dividing plate set(Plate "A" - 15, 16, 17, 18, 19, 20 Plate "B" - 21, 23, 27, 29, 31, 33 Plate "C" - 37, 39, 41, 43, 47, 49). A set of wrench and screws are free for you with your installation.

6 rotary table price

• Works as an index center in the vertical position as well as a conventional rotary table for circular cutting, angle setting, boring and spot facing. • 10-Second Vernier reading • Disengageable worm gear permits rapid rotation. Worm gear is hardened and ground. • Optional dividing plates and crank handle can be attached to the rotary table drive mechanism. One rotation of handle equals 4". • The table is made of Meehanite. The base of the body, table surface and rotating parts are ground finished, permitting very smooth rotation.

6 rotary table price

Drill holes and bolt-hole patterns, mill intersecting slots and curved slots precisely. Includes worm drive hand wheel with Vernier ring for 4-degree table movement per turn, three T-slot ways for easily mounting a chuck, and two table clamp handles for stability. Main body mounts horizontally and vertically. You will need the table, tailstock, and chuck to complete your rotary table. The 6” table is a complete pack including the dividing plates and the tailstock. The 8” table takes 1/2” T-slot nuts (35-110) and has an MT3 bore. The 6" table uses 10 mm t-slot nuts and has an MT2 bore.

6 rotary table price

The H7527 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your rotary table.

The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the rotary table may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.