8 rotary table with chuck manufacturer

A serialized set of jaws are then finished, ground, and lapped on their designated chuck body which will be the same chuck body on the final assembly to achieve a greater accuracy

Your one stop SHOP for ROTARY TABLES, SUPER SPACERS TAILSTOCKS and ACCESSORIES. Serving the American Machine Shop since 1953. AJAX INDUSTRIES, Lets PUT WORKHOLDING to WORK for Your Shop.

Ajax Industries is a leading manufacturer of Lathe Chucks & Jaws Providing our Customers with the Workholding Solutions to make Your SHOP more Productive.

Turn your rotary table into a Super Indexer with this chuck. Align the chuck to the rotary table to easily mount your workpiece onto the rotary table. Great to use when machining multiple pieces. Chuck comes with both inside and outside jaws and is 3" from the back of the chuck to the tip of the jaws. Can be used with either the 6" or 8" table. Rotary table chuck flange 33-103 is required for the 8" rotary table.

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.

The vertical & horizontal rotary table, one of the main accessories of the milling machine, is a precision work positioning device. This machine is widely used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis.

It can be mounted "flat," with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. Or, mounted the rotary table on its end (or mount it "flat" on a 90° angle plate) so that it rotates about a horizontal axis. In this configuration, a tail stock can also be used, thus holding the workpiece "between centers."

It"s not difficult for you to adjust the rotary table milling machine. What you should do is to adjust the handle to the position where you want because the precise scale is marked on the dial.

Except for the 5.9""(150 mm) rotary machine table, we also offer you four locating blocks. The center can be corrected quickly and accurately by the Key guide block.

Control is very accurate and precise thanks to the direct mount self-locating 3-jaw chuck, 4° table movement per handle rotation, and 20 second vernier scale.

The T1190 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your rotary table.

The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the rotary table may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

This is a modification of our 4″ Manual Rotary Table. This modification came about after requests from our laser engraving customers. They wanted a rotary table that had a larger through-hole to which they could mount our chucks.

This version of the Sherline rotary table has a Nickel-Teflon plating on the tabletop because it was designed to be used in an everyday production environment. This gives the table a rust-resistant surface that is hard and has added lubrication qualities.

The table is 2″ high and 4″ (100mm) in diameter. The main components have been machined from solid bar stock steel, and the complete unit weighs seven pounds. The table has been engraved with a laser, giving sharp and precise lines every 5°, numbered every 15°. These lines are calibrated with the 72-tooth worm gear that is driven by the handwheel or stepper motor. The handwheel is divided into 50 parts, making each line on the handwheel 1/10°. This allows a circle to be divided into 3600 increments without interpolation. Seventy-two revolutions of the handwheel rotate the table one revolution.

NOTE: You can have your manual rotary table upgraded to CNC-ready, but this is done as a factory-only replacement. You will need to ship your manual rotary table back to our factory for the conversion.

condition  - Please contact Prolinemax Support Team at 1.626.401.9887 or email for assistanceBuyer is responsible for all return costs: shipping, packaging and insurance (to insure/cover for damage during return)All Returns Must Have RMA# (Return Merchandise Authorization Number):

10 days additional charges may be applied or may make your product(s) nonreturnable - Please contact Prolinemax Support Team 1.626.401.9887 for RMA# - Return item must be in the condition when it was delivered, new and in original packaging - All returns must be prepaid freight - We will refuse any return shipment without RMA# or package send COD or Freight Collect

Special purchases including: clearance products, inventory sale products, custom quotes, special discounts, etc.Any product that has been assembled, installed, modified or used in any way.Any product that is not in resalable condition.Any product not accompanied by a Return Merchandise Authorization Number (RMA#) issued by ProlinemaxAny product that is not in the original box with sufficient packaging materials.

Graduations are accurately cut in increments of one degree.Optional AccessoriesDividing plates have all divisions from 2 to 66 and all numbers from 68 to 132 that can be divided by 2, 3 and 5. Fits all except 6".