8 rotary table with chuck in stock

A serialized set of jaws are then finished, ground, and lapped on their designated chuck body which will be the same chuck body on the final assembly to achieve a greater accuracy

Now you can attach a 1/4″ or 3/8″ drill chuck, an older Unimat chuck with 12 x 1 mm or 14 x 1 mm threads or a 1/2-20 Sears chuck to your Sherline rotary table. The adapter screws into the 3/8-16 threaded center hole of the table.

The chuck adapter has a 15/32 through hole with 3/4-16 thread for the chuck and a 5/8-24 thread for the rotary table. The through hole allows stock to pass through the chuck and P/N 3710 4″ Rotary Table.

condition  - Please contact Prolinemax Support Team at 1.626.401.9887 or email for assistanceBuyer is responsible for all return costs: shipping, packaging and insurance (to insure/cover for damage during return)All Returns Must Have RMA# (Return Merchandise Authorization Number):

10 days additional charges may be applied or may make your product(s) nonreturnable - Please contact Prolinemax Support Team 1.626.401.9887 for RMA# - Return item must be in the condition when it was delivered, new and in original packaging - All returns must be prepaid freight - We will refuse any return shipment without RMA# or package send COD or Freight Collect

Special purchases including: clearance products, inventory sale products, custom quotes, special discounts, etc.Any product that has been assembled, installed, modified or used in any way.Any product that is not in resalable condition.Any product not accompanied by a Return Merchandise Authorization Number (RMA#) issued by ProlinemaxAny product that is not in the original box with sufficient packaging materials.

Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 200 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, runout - see attached PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chuck is delivered in a paper box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.