8 rotary table with chuck quotation

condition  - Please contact Prolinemax Support Team at 1.626.401.9887 or email for assistanceBuyer is responsible for all return costs: shipping, packaging and insurance (to insure/cover for damage during return)All Returns Must Have RMA# (Return Merchandise Authorization Number):

10 days additional charges may be applied or may make your product(s) nonreturnable - Please contact Prolinemax Support Team 1.626.401.9887 for RMA# - Return item must be in the condition when it was delivered, new and in original packaging - All returns must be prepaid freight - We will refuse any return shipment without RMA# or package send COD or Freight Collect

Special purchases including: clearance products, inventory sale products, custom quotes, special discounts, etc.Any product that has been assembled, installed, modified or used in any way.Any product that is not in resalable condition.Any product not accompanied by a Return Merchandise Authorization Number (RMA#) issued by ProlinemaxAny product that is not in the original box with sufficient packaging materials.

Control is very accurate and precise thanks to the direct mount self-locating 3-jaw chuck, 4° table movement per handle rotation, and 20 second vernier scale.

The T1190 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your rotary table.

The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the rotary table may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

Graduations are accurately cut in increments of one degree.Optional AccessoriesDividing plates have all divisions from 2 to 66 and all numbers from 68 to 132 that can be divided by 2, 3 and 5. Fits all except 6".

A serialized set of jaws are then finished, ground, and lapped on their designated chuck body which will be the same chuck body on the final assembly to achieve a greater accuracy

Our best seller, the VH-8 has a 8.25" (210mm) diameter spindle with a 2.0" through hole. With 225 ft. lbs. of brake torque, the VH-8 maintains a rigid design with dual tapered roller bearings supporting the front and back of the spindle. The centerline is 6.75". The worm wheel is helically cut and throated for increased surface contact between the wheel and worm. This provides longevity and helps maintain the accuracy of the rotary table over time. There is an optional 8" 3-Jaw chuck and adapter plate available as well as a 5C nose piece with either manual or air collet closer.

If you like our VH-8 but need a larger through hole, our VH-8XL is your answer offering a 3.27" through bore combined with all the other great features and specifications of the VH-8.

The AC-125 provides up to 12,000 lb (53,379 N) of draw force, with 0.060" (1.5 mm) of travel, allowing part diameter variation of 0.015" (0.38 mm) without readjusting the collet. Its design is similar to the AC-25, but uses two pistons, which more than doubles the available draw force. A large internal spring is used for part release. The AC-125 can be tightened from the rear, and provides a 5/16" (8 mm) through-hole. Its compact size allows it to be used with all models of HA5Cs, and with the use of a small spacer, it can be operated vertically. Clamping force is varied by regulating air pressure supplied to the unit. The AC-125 air collet closer can be used with all types of 5C collets, including step collets. Includes one closer for each head on multi-head units.125 pneumatic collet closer, collets can be clamped and unclamped with the flip of a lever.