peiseler rotary table price

A very high quality unused CNC rotary table manufactured by Peiseler of Germany. For use in the vertical position (horizontal axis) fitted with a pneumatic brake system and is offered in the first instance without motor or encoder, but could be prepared for any machine tool integration. General specifications:Centre height120mmOverall height190mmThrough hole35mmSpindle diameter120mmCarrying capacity36kgMotor mounted to the left hand side, you should check for limitations in the Y axis traverse to ensure that there is no collision with the rear of the machine covers or the doors of the machine.

Rotary tables with two rotational axes, usually arranged perpendicularly, allow for five-axis workpiece machining in machining centres. The trunnion axis mounted in the machine tool can be used either with or without a counter bearing. Up to four faceplates can be used as table axes in series. The spindle pitch of these faceplates is made to your specifications.

In the ZATC and ZAS series, worm gears are used, in the ZASD series, direct drives, and for the ZASR devices, gear drives. We offer you trunnion axes and table axes with different drives. ATD dyn solutions are available for turning.

The following chart shows specifications of two-axis rotary tilt tables with direct drives as well as in the table and trunnion axis. We can equip the last, in particular, with an alternate drive technology. For this axis worm gears or gear drives are prevalent. In the case of the ZASR 630 and ZASR 800, the trunnion axis is always designed with a pre-loaded gear drive. Other options are available if you require multi-spindle table axes for two-axis rotary tilt tables. The spindle pitch is machine builder dictated. We would be glad to explain this to you personally. Of course we can make modifications for your installation space requirements. The ZASD series can be equipped with the ATD dyn series in the C axis for turning applications.

ATC is the new, compact, high-performance and flexible series from Peiseler. An extremely modern design with a good price characterises these NC rotary tables. The basis for this successful design is the complete optimisation of the drive train, the harmonization of the frame sizes, the use of identical design principles for the components and their five-axis machining. The well thought-out and service-friendly structure allows them to be quickly overhauled after many years of industrial production by your own trained employees. We would be happy to support you with instructions, devices and our precision components.

Direct drives allow highly dynamic and continuous movement and with this, a constant flow of new machining concepts. Peiseler took the lead in this technology as early as 1997 with the development of the world"s first subdevice with a direct drive, just as it did with the first two-axis rotary tilt table with a direct drive in 2001. Today, we are in the technologically leading position to offer you direct drives for turning operations in S1 continuous milling. Increasing machine speed while maintaining bearing rigidity at a level that is also suitable for milling enables us to combine turning and milling applications. This allows Peiseler"s development engineers to use machining centres more flexibly. Direct drives use very sensitive control technology and place high demands on energy supply.

Direct drives allow highly dynamic and continuous movement and with this, a constant flow of new machining concepts. Peiseler took the lead in this technology as early as 1997 with the development of the world"s first subdevice with a direct drive, just as it did with the first two-axis rotary tilt table with a direct drive in 2001. Today, we are in the technologically leading position to offer you direct drives for turning operations in S1 continuous milling. Increasing machine speed while maintaining bearing rigidity at a level that is also suitable for milling enables us to combine turning and milling applications. This allows Peiseler"s development engineers to use machining centres more flexibly. Direct drives use very sensitive control technology and place high demands on energy supply.

Indexing table 380 mm diameterDiameter graduation directly in 15 degree steps24 he graduation via index boltdirectly with crank and index plate7 Clamping fluteswidth 12 mmGes. height 120 mmWeight 55 kg

Compact precision small rotary table, suitable for single part or small series production in laser welding precision mechanics. A horizontal or vertical assembly is possible.

It is particularly suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, slot milling, or for use on a tool or surface grinding machine.

6.-Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity t...