vertical injection molding machine with rotary table made in china

Two units avalaible. Machines are in good running condition with rotary table.Interested customer is welcome to visit our warehouse to inspect and test run machines.

A vertical injection table is also used to make molds by compressing materials into a mold. At the same time, a vertical injection table is used to make molds, compressing, and compressing molds. The vertical injection table is also used to make molds, compressing, and compressing materials. Compressing molds are also used to make molds.

These vertical injection machines are large enough to require substantial amounts of water to be heated and injected into the mold directly. A rotary injection machines are ideal for small batch continuous production.

vertical injection machines are also rotary. They are a versatile choice to make ideal products that have a batch- delivery function than the standard injection machines, such as vertical injection machines. These rotary machines are called the vertical injection machine, which is used to make ideal products from two to more metals.

The plastic injection molders at Alibaba are durable and designed for long service life. Each rotary vertical injection molding machine undergoes constant design improvement for high-speed work. With versatility at heart, some molding tools allow for multi-select high-end applications. From consumer electronics to pharmaceuticals to food & beverage, and also the automotive industry. Limit your concern of experiencing considerable defective rates. Get ready for a fast and industry-standard response rate thanks to the single-cylinder system with servo-valve. You’ll also be investing in a rotary vertical injection molding machine of precise industry-standard. Long-lasting service and durability will be your rewards.

The plastic rotary vertical injection molding machine products from wholesalers on Alibaba are specialized for different sizes of preforms. The special screw in the equipment highly increases plasticizing shot weight and speed. And with a clamping force ranging between 2,000 kN to 13,000 kN, molding machines boast the capacity to resist external machining forces. This plastic injection moulding machine is suitable for the packaging industry: thin wall containers, caps, pails, buckets, etc. Your go-for equipment for designing a wide range of PVC pipe fittings. The special design of the plastic molder means you’re investing in the exact clamping force you actually require.

Each wholesale rotary vertical injection molding machine from Alibaba takes plastic granules and shapes them into your required dimensions. Here’s where you’ll get improved accuracy on your applications. The steel bush in the clamping unit adopts a new structure. This construction minimizes wear resistance and reduces the effect of steel bush lubrication. That means you can now save the costs used on lubrication oil. Invest in plastic injection moulders today. Simply browse the wholesale rotary vertical injection molding machine listing from leading Chinese wholesalers and get one for use in your plastic processing business.

vertical injection moulding machine,china vertical plastic injection machine,rotary table vertical injection molding machine,plastic injection molding machine vertical,toothbrus...

The need for plastic injection mold machines in this region is due to the numerous plastic injection mold producers, especially in cities like Ningbo Ninghai, Yuyao, Yinzhou, and Cixi.

With many foreign private partnerships and investments in the mold manufacturing business, Jiangsu province has seen an upsurge in mold machine manufacturers.

China is home to many injection molding machine manufacturers. Picking one of these manufacturers will still give you some satisfaction mainly because their prices are very competitive.

With the main production facility in Shanghai and several other production facilities around China, Husky Injection Molding Systems China Limited has grown in leaps and bounds since its inception in 1993.

Husky Injection Molding Systems China Limited started as a supplier of injection molding machinery for plastics but has since added other equipment to its production line.

It has a presence in other parts of the world, including Germany, Canada, Austria, and Luxembourg, coupled with China’s Beijing, Hongkong, and Shenzhen facilities.

Engel was established in the year 2007 with a large-scale machine plant in Shanghai, China. It has since then become the world’s leading manufacturer of injection molding machines.

They offer automated production technology for manufacturing Injection molding machines for elastomers and thermoplastics. Their offerings are quality assurance for individual components and a competitive stand in the world market.

Their design includes the co-injection and precision injection methods used in rubber injection molding machines, typical injection molding machines, vertical injection molding machines, and much more.

LOG Machine is an injection molding machine manufacturer per excellence that manufactures various hydraulic, electric, and servo-high energy injection molding machines.

These varieties are there to serve the different requirements of clients for other purposes and needs. Their solution-based approach to manufacturing injection molding machine solutions has made them the preferred manufacturer for some clients.

With a combined production facility area of 1,120,000 square meters for all seven production facilities in Wuxi, Ningbo, and Guangzhou, Haitian Plastic Machinery is a force in injection mold machine production.

It manufactures injection molding machines with various applications in different industries, including medium and advanced segments in plastic manufacturing companies.

With over 5,000 square meters of production facility area in Zhejiang, China, and 13 production lines, BOLE improves its product quality and quantity.

Ningbo Shuangsheng Plastic Machinery Co Ltd started in 2002 and delivered quality, tailor-made solutions in the injection molding machines as with ISO and CE certification for attestation.

With a dedicated team of engineers and technical experts devoted to research and development, Shuangsheng Plastic Machinery has strategically positioned itself to meet customers’ needs.

With an intense research and development department, the company has placed itself among the leading providers of injection molding solutions with over 200 patented technologies.

Guanxin’s stock in trade is developing specialized injection molding machines, especially for other manufacturing industries like PVC/PPR pipe fitting, PET reform, rigid crates, plain buckets, and medical instruments.

With their facility in Guangdong, China, they’ve been able to put together some of the brightest minds in the industry to build an intelligent module that makes clients’ production efficient.

DAYA machinery has had a reputation for quality injection-molding machine manufacture since its inception and is among the top manufacturers in the industry.

Having a factory that covers an estimated footprint of 50,000 square meters enables them to facilitate innovative turnkey solutions for injection molding productions.

DAYA’s solutions for injection molding machines have a wide range of applications, including for industries like automotive, plastics manufacturing, and electronics.

Powerjet Plastic Machinery Co. LTD has been in existence for more than 18 years, designing, manufacturing, and selling injection molding machine solutions to various clients.

COSTAR Machinery Company Limited was founded in 2015 to partner with various individuals in various sectors to help them achieve their injection molding production goals.

Since its inception in 1995, MEGA Machinery has made its goal clear, and it is to offer its clients improved injection molding production with efficiency and profitability.

This goal remains the single motivation for producing quality and innovative products using years of experience and expertise in injection molding machine manufacture.

With a strong team of dedicated engineers, designers, and researchers, MEGA Machinery develops different injection molding machines for plastic processing.

They have three production facilities across China from where they produce both hybrid and hydraulic injection mold machines ranging in clamp size of 770kN to 12,500kN

WINTEC is a subsidiary of ENGEL and, as such, carries the quality mark of ENGEL in all its products, which includes various types of injection molding solutions.

With over 50 models that range in clamping force of between 988 tons to 3,000 tons, Highsun is taking quality injection molding machines to the world.

With over two scores of specifications and a hundred quality injection molding solutions, Donghua Machinery Ltd continues to put its customers first in every design and manufacture.

Since its establishment in 1992, Haijiang Machinery Manufacturing Co. LTD has been dedicated to producing high-tech injection molding machine solutions for the industry.

They have a facility area of more than 50,000 square meters and employ over 500 staff members that are equally dedicated to meeting customer requirements for injection molding solutions.

Zhenfei Injection Molding Machine Manufacturing Co. Ltd designs, manufactures, sells, and services plastic production machinery, including injection molding machines.

They occupy over 50,000 square meters of space for production facilities within China, accompanied by a wealth of professionals and engineers to produce research-based designs.

In the production of injection molds, there is the possibility of introducing a defect, sometimes due to a faulty manufacturing process or a technically deficient employee.

If impurities find their way into the molten plastic, you can expect the final product to separate in layers as the impurities will not bond with the plastic.

Impurities in the mold or the plastic material and excess injection speed can cause discoloration. An inappropriate screw system can also result in discoloration.

Uni X-ray is one of such Chinese X-ray machine suppliers with close to two decades of consistent value delivery to customers nationally and internationally.

They also have a dedicated team for round-the-clock after-sales support with an online platform that allows them to troubleshoot your X-ray system even if you are on the other end of the globe.

In conclusion, having this list of injection molding machine manufacturers is good to help you quickly pick the best manufacturer for your peculiar molding solutions.

However, since molds can be subjected to many defects that can lead to a severely reduced quality for your product, it is advisable to be acquainted with a suitable X-ray machine manufacturer.

Inserts can be ergonomically encapsulated with our vertical ALLROUNDER injection molding machines. You can choose from the most extensive range of machines available in the industry, from the comprehensive spectrum of different ALLROUNDERs through to automated machine concepts and customer-specific special solutions.

The technology of our vertical ALLROUNDERs can be matched precisely to your specific injection molding tasks, while still maintaining maximum ergonomic efficiency. A wide range of clamping forces, flexible vertical and horizontal injection units, as well as task-specific equipment packages are available, for example for thermoset or silicone processing.

The machine can be equipped with automatic inserting and removing devices to achieve fully automatic operation. It is more convenient to operate and connect with automation to increase production capacity.

The standard disc is a vertical three-column direct clamping die with special mold requirements. It can also be a vertical four-column immediate clamping die.

Vertical rotary plastic injection molding machine, also known as rotaryinjection molding machine, multi-station injection molding machine, its function is more than twice of the vertical injection molding machine, through a machine to improve production efficiency (one set of upper mold, three sets of lower mold, can do more) vertical mold closing, vertical injection, easy to put the product.

Vertical rotary plastic injection molding machine is suitable for producing automotive parts, energy-saving lamp heads. Golf balls, eyeglass holder nosepiece, LED brackets, and other metal bodies and plastic products forming work of appliance of direct contact with the public, can do fully automatic workflow operation, high efficiency, and low cost.

The machine surface is chrome plated to prevent rust, beautiful and durable. The power section is available with hydraulic motor and servo motor, or higher configuration according to the customer’s product and requirements.

vertical clamp machines bring you every advantage for insert molding, making it easy to combine two materials and reduce assembly costs. From encapsulation of delicate electronic parts to over molding of plastic on metal for diverse automotive applications, SV-R Serise also offers a reduction in post-molding operations, saving time and money.

SV-R Serisemachines can be configured for every possible insert molding application by combining a wide range of clamp, table and injection unit configurations. Vertical clamps with horizontal tables let gravity gently and easily do the work of holding single or multiple inserts. Open clamp designs with rotary and shuttle tables give the advantage of working with multiple molds and simultaneous operations including pre-molding, injection and post-molding operation. Simultaneous operations are easily automated for consistent quality, high productivity and high profitability.+ Read More

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.

Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNITThe injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve.

These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.

Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNITThe injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve.

These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.

Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNITThe injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve.

These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.

Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNITThe injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve.

These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.

Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNITThe injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve.

These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

Highly efficient Rotary Vertical Injection Moulding Machine is offered by us to our clients. It provides effective and safe functioning owing to its advanced positioning devices. The machine has a clamping force of 85 tons with a shot weight of 200 gm. It has an excellent functioning hydraulic ejector stroke that can be adjusted through HMI. It is an automatically working machine which has screw rotation speed varying from 0 to 250 RPM. The Rotary Vertical Injection Moulding Machine offers an easy handling and effective operation. It has an ejector force of 1.6 ton and ejector stroke of 75mm.

We “Swift Auxi Technik Private Limited”, established in the year 1997, are one of the accredited organizations, engaged in manufacturing a comprehensive array of Injection Moulding Machine, Insert Moulding Machine, Water Chiller and much more.Our offered array of auxiliary equipment is manufactured using premium quality machines and other requite material, sourced from the vendors of high prestige.

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.

Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNITThe injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve.

These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.

Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNITThe injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve.

These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

Rotary Injection Moulding Machine Swift Auxi Technik Pvt. Ltd. has gained success in the global market by providing a large array of Rotary Injection Moulding Machines. Owing to diverse clamping systems, the machines provide an efficient operation. These are highly energy efficient and can be operated by single person, thus help to reduce the production cost as well. The machines have industrial based tensile strength and several automatic features that make their handling much easier. These have the ability to function for adequate number of years without any malfunctioning. The Rotary Injection Moulding Machines are used in the manufacturing of LED bulbs, pipe fittings, ball valves and connectors.

COMI builds vertical injection presses for rubber,hydroblock closure with tonnage from 150 to 1000 tons and with FIFO or LIFO injectors from 1050 cc to 12,000 cc.

... measurement and injection, realized by eliminating the destabilizing factors during the plasticization measurement and injection, by separating the plasticization and injection. Sodick"s ...

... 70/65NII is a preform molding machine utilizing ASB"s well proven vertical clamping system. Compact and strong, it provides accurate and stable molding while maintaining ...

Precise & Versatile – the vertical MAPLAN ERGO+ injection moulding machines are designed to suit a variety of requirements and impress with their high quality and optimised repeat accuracy. ...

The future of the automobile is driven by lightweight design: This is why we developed the ENGEL v-duo. This vertical large-scale machine is a sensitive power package that achieves extremely precise results, ...

Leading in all disciplines. All DESMA BENCHMARK injection moulding machines unite a unique range of beneficial technology. Worldwide, thousands of vertical injection ...

VH series are upper part injection and bottom part clamping, vertical injection machines. It is suitable for insert molding such as metals, films, glass, ...

The BOY XS V features vertically arranged clamping and injection units. Being the smallest model, it supplements the reliable series of BOY insert moulding machines. This machine is suited ...

TWX220RⅢ25V was developed from the best-selling hybrid type vertical machine “TNXSeries,” which was widely used in many insert molding industries. This new hybrid type vertical ...

fastest fully automatic machine used for the heading of tubes at a speed of up to 300 pieces per minute using the injection moulding technology from Aisa.

... smooth mold movement, electric interlocking, smooth and beautiful injection head, good safety and reliability, small floor space, easy mold assembly and disassembly, etc.

With DirectIndustry you can: Find the product, subcontractor or service provider you need | Find a nearby distributor or reseller| Contact the manufacturer to get a quote or a price | Examine product characteristics and technical specifications for major brands | View PDF catalogues and other online documentation

Multiplas is the professional injection molding machine manufacturer in Taiwan. Through years of efforts, Multiplas has established an excellent reputation in the worldwide markets for the dependability of its