5c collet rotary table supplier

The AR-5c is TJR’s pneumatic collet rotary table that employs a pneumatic brake and 5c collet closer system. This unit is an affordable solution for customers who require a 5c collet for their workpiece as an alternative to a 3 or 4 jaw chuck.

The AR-5c collet rotary table can be integrated into a CNC machine control as a full 4th axis or it can be operated as an indexer by utilizing TJR’s SAC (Single Axis Controller).  In addition this series is offered in Right Handed and Left Handed motor mount configurations with a powerful pneumatic braking system.

The AR-5c unit is manufactured with a radial-axial preloaded bearing system for high rigidity that can perform light or heavy cutting. The AR-Series uses a dual lead worm shaft and worm gear to ensure long term indexing accuracy in both directions.

Single spindle 5C rotary table. Stand alone “M-Code” style rotary table with 5C collet spindle nose. Rotary body features dual needle roller bearings and thrust spindle bearings. Small footprint and compact designed for small VMC’s and CNC drilling tapping centers.

The TJR AR-5C Pneumatic Collet Rotary Table offers an affordable alternative to 3- or 4-jaw chucks for users whose workpieces require the use of 5C collets.

The AR-5C rotary table employs a 5C collet closer system and can be integrated into a CNC machine control as a full 4th axis or operated as an indexer via TJR"s Single Axis Controller (SAC). The table features a powerful pneumatic braking system and is available in right-handed and left-handed motor mount configurations. A radial-axial preloaded bearing system provides high rigidity, and a dual-lead worm shaft and worm gear help provide long-term indexing accuracy in both directions.

Table diameter is 125 mm (4.92"), with a thru-hole diameter of 35 mm (1.37"). Minimum indexing increment is 0.001° and maximum table rotation speed is 83.3 RPM. Peak allowable workpiece load is 100 kg (220 lb). The table weighs 34 kg (75 lb.) and servomotor models are available for FANUC or Mitsubishi tapers.

Steve Smith, President of CNC Indexing & Feeding Technologies, said, "The TJR AR-5C Pneumatic Collet Rotary Table provides a rigid, accurate way for users to grip and index products suited for 5C collets."

A manufacturer of rotary tables since 2009, TJR Precision Technology Co., Ltd., supplies tables for application on machine tools including Doosan, Mazak, DMG MORI, Hardinge, YCM, Leadwell, Feeler, Bulova and Tongtai. A 3-year parts warranty is standard with all TJR rotary tables.

With the A6AC, collets can be clamped with the flip of a lever. The A6AC provides up to 5000 lb (22,242 N) of draw force, with 0.125" (3.18 mm) of travel. Clamping force is spring actuated and adjustable to 100 ft-lb (135 Nm). The A6AC tightens from the rear, and has a 1.75" (44.5 mm) through-hole.

The adapter from the draw tube to the collet is included with this collet chuck. The 5C spindle adapter has a 2-3/16"-10 threaded nose, which can be used for oversized collets, collet chucks, and small fixtures. All required hardware is supplied by Haas.

Single spindle 5C rotary table. Stand alone "M-Code" style rotary table with 5C collet spindle nose. Rotary body features dual needle roller bearings and thrust spindle bearings. Small footprint and compact designed for small VMC"s and CNC drilling tapping centers.

The AC-125 provides up to 12,000 lb (53,379 N) of draw force, with 0.060" (1.5 mm) of travel, allowing part diameter variation of 0.015" (0.38 mm) without readjusting the collet. Its design is similar to the AC-25, but uses two pistons, which more than doubles the available draw force. A large internal spring is used for part release. The AC-125 can be tightened from the rear, and provides a 5/16" (8 mm) through-hole. Its compact size allows it to be used with all models of HA5Cs, and with the use of a small spacer, it can be operated vertically. Clamping force is varied by regulating air pressure supplied to the unit. The AC-125 air collet closer can be used with all types of 5C collets, including step collets. Includes one closer for each head on multi-head units.125 pneumatic collet closer, collets can be clamped and unclamped with the flip of a lever.

The TJR AR-5C Pneumatic Collet Rotary Table from CNC Indexing & Feeding Technologies (Mason, OH) provides an affordable alternative to 3-jaw or 4-jaw chucks for users whose workpieces require the use of 5C collets. The AR-5C rotary table employs a 5C collet closer system and can be integrated into a CNC machine control as a full 4th-axis or operated as an indexer via TJR’s Single Axis Controller (SAC). The table features a powerful pneumatic braking system and is available in right-handed and left-handed motor mount configurations. A radial-axial preloaded bearing system provides high rigidity, and a dual-lead worm shaft and worm gear ensure long-term indexing accuracy in both directions. Table diameter is 125 mm (4.92 in), with a thru-hole diameter of 35 mm (1.37 in). Minimum indexing increment is 0.001 deg and maximum table rotation speed is 83.3 rpm. Peak allowable workpiece load is 100 kg (220 lb). The table weighs 34 kg (75 lb) and servo motor models are available for FANUC or Mitsubishi tapers.

“This TJR AR-5C Pneumatic Collet Rotary Table provides a rigid, accurate way for users to grip and index products suited for 5C collets,” said Steve Smith, the president of CNC Indexing & Feeding Technologies, the exclusive U.S. importer of TJR rotary table products, including horizontal, vertical and tilt rotary tables, indexers, and accessories. A manufacturer of rotary tables since 2009, TJR Precision Technology Co., Ltd. (Taichung City, Taiwan) supplies highly advanced tables for applications on machine tools, including Doosan, Mazak, DMG Mori, Hardinge, YCM, Leadwell, Feeler, Bulova and Tongtai. A three-year parts warranty is standard with all TJR rotary tables. CNC Indexing & Feeding Technologies stocks the TJR line at their Mason location and offers full installation and repair services.