diy rotary table made in china

Please refer to the pictures and diagram to be sure the kit will mount to your table.  Your rotary table should look similar to the one in the photo- for illustration only, the rotary table is not included with the CNC drive kit.

This tailstock was designed for use with my rotary table. This has a centre height of 85 mm. I have made the height fully adjustable from 20 mm to 90 mm since it may be useful a...

The way that I was taught is that you have to make up a test bar. Take a piece of 12" by 1" roundbar, drill two centre holes in it"s ends, on your lathe and take a parallel cut between centres. Once you have corrected the error of your lathe and both ends of the test bar measure the same diameter, you can then use the test bar in your milling machine as well, to set the tailstock of the dividing head as well as the alignment of the bar to the table axis.

Another plus for the Sherline RT is Sherline sells a bunch of accessories for it as well. There is a 5" tooling plate, a tilting angle table, and a variety of center adapters to mount a chuck to the RT. They also have a full CNC conversion including a CNC indexer if you ever wanted to go that way.

I was going to say I didn"t see that much of a price advantage on the no name Ebay rotary tables, but the Sherline is almost $300. I didn"t remember it being that much, in fact I paid less for my 6" Taiwan RT although it was lightly used.

In favor of the import rotary tables some of them are available with indexing plates and tail stocks allowing them to be used as an indexer as well as a rotary table.

Our Tables are made of high density Meehanite and use "HEIDENHAIN" electronic equipment to inspect angle to assure the excellent quality and durableness.

Worm is hardened and ground. The ratio is 90:1. The work table is graduateda full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1"min. And vernier scale makes settings down to 10 seconds possible.

These Rotary Tables are popular for their excellent perfor-mance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work.

Our Tables are made of high density Meehanite and use "HEIDENHAIN" electronic equipment to inspect angle to assure the excellent quality and durableness.

Worm is hardened and ground. The ratio is 90:1. The work table is graduateda full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1"min. And vernier scale makes settings down to 10 seconds possible.

These Rotary Tables are popular for their excellent perfor-mance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work.

IP rated rotary tables provide more possibilities for humidity and dusty environment in actual working conditions, like CNC drilling work, CNC grinding work, laser marking and laser cutting work, etc.

High precision and excellent IP rated performance makes the high precision and accuracy work possible, such as diamond cutting rotary task, phone production and inspection rotary task, etc.

5) After Sales Service and Technology Assistance --- Company provides after sales service and technical assistance as per customers requirement and need Tilting Rotary Tables Contact us: Shandong Sishui OLI Machine Co. 4 Could you produce non-standard products9 Yes,we can 5. Why Choose Us 9 1) Cost Control---Lower your cost in products purchase and insurance 2) Quick Respond---offers & solutions send within 48 hours 3) Fast Delievery---universal & interchangeable parts delivery within 30days 4) Genuine Products with Excellent Quality---Company has always proved the 100% quality products it provides with genuine intent. 5) After Sales Service and Technology Assistance--- Company provides after sales service and technical assistance as per customers requirement and need 6)15 years OEM manufacture experience