drilling rig rotary table sizes in stock

Cameron rotary tables range from 27 1/2 in to 60 1/2 in and feature a large oil capacity that adds to the unit"s durability. The rotary table includes a forged-steel fabricated housing and a heat-treated forged-steel turntable. Each rotary table is supplied with spiral-bevel, induction-hardened gears and two independent ratchet-type locks, with lever access from the top to lock the table in position.

Rotary Tables - 37-1/2 IN. ROTARIES, FG-2A, 500 TON, 14 IN. - 2-3/8 IN. PIPE SIZES USE FOR TRIPPING AND CASING RUNNING. OPTIONAL HPCD AVAILABLE. ALL FG SERIES TOOLS ARE HYDRAULICALLY ACT... More Info

Rotary Tables - 49-1/2 IN. ROTARIES, FG-3A, 750/500 TON, 20 IN. - 2-3/8 IN. PIPE SIZES USE FOR TRIPPING AND CASING RUNNING. OPTIONAL HPCD AVAILABLE. ALL FG SERIES TOOLS ARE HYDRAULICALLY... More Info

Rotary Tables - DEN-CON 49-1/2 IN. HMB BUSHING, 750 TON RATING, AVAILABLE WITH A VARIETY OF INSERT BOWLS INCLUDING CONVENTIONAL API BOWLS, 500 TON BOWLS AND 750 TON BOWLS. More Info

Rotary Tables - 37-1/2 IN. - 49-1/2 IN. ROTARIES, FG-6B, 350 TON, 8-5/8 IN. & SMALLER WORKOVER RISER. PURPOSE BUILT POWER SLIP FOR HANDLING WORKOVER RISER WITH UMBILICALS. IDEAL FOR RENT... More Info

Rotary Tables - POWER SLIPS ARE AVAILABLE FOR 27-1/2 IN., 37-1/2 IN. & 49-1/2 IN. ROTARY TABLES. RATED CAPACITIES FROM 350 TONS TO 750 TONS. 27-1/2 IN. ROTARIES, FG-5A, 350 TON, 9-5/8 IN... More Info

Rotary Tables - ADAPTER RINGS - 750 TON - SOLID & SPLIT RINGS - DEN-CON 60-1/2 IN. X 49-1/2 IN. ADAPTER RINGS. ADAPTER RING OUTSIDE CONFIGURATION AND INSIDE CONFIGURATION CAN BE DONE FOR... More Info

Rotary Tables - ADAPTER RINGS - 750 TON - SOLID & SPLIT RINGS - DEN-CON 49-1/2 IN. X 37-1/2 IN. ADAPTER RINGS. ADAPTER RING OUTSIDE CONFIGURATION AND INSIDE CONFIGURATION CAN BE DONE FOR... More Info

The C-375 Rotary Table by National Oilwell Varco is used for onshore and offshore drilling. Most conductor, riser, and wellhead elements will pass through the C-375 Rotary Table 37-1/2″ table opening.

Armco produces a full line of NATIONAL Rotaries notable for dependability, safety and efficiency, and suitable for any drilling requirement from shallow to the deepest wells. Construction features of NATIONAL Rotaries are developments of nearly half a century of constant design improvement.

Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success—now and in the future.

Explore the various drilling rig parts rotary table products available for wholesale at Alibaba.com. Get a drilling rig parts rotary table for drilling water wells, water exploration holes, geological exploration, coal mines, and other kinds of mining. Some drilling rig parts rotary table options use caterpillar tread to move. Others use rubber tires, while others require a separate means of transport. Caterpillar tread propulsion can climb up to 25 degrees inclination. Some products in the range are capable of drilling over 200 meters, while others are only used for open-pit mining with depths of around 3 meters. Drilling can be done vertically downwards, horizontally, or in a slanting direction. Drilling speed depends on the power of the machine and the general hardness of the surface. The hole diameter can vary from 90mm to 200mm.

drilling rig parts rotary table options also include an air compressor, a mud pump, drilling rods of various sizes, connectors, and a drilling tower. Drilling is done using drill bits of various shapes, sizes, and compositions. You can choose between diamond bits, alloy ring-shaped bits, 3-wing alloy bits, PDC bits, and hammer bits. Each drill bit uses different drilling methods, including rotary, percussion, blast hole, and core drilling.

Smaller products have a lifting power of around 25 kilonewtons and weigh about 2,500kgs. They’re ideal for small-scale drillings such as farms and homes. Larger ones are faster with more power, making them ideal for commercial use. Browse through Alibaba.com and find a drilling rig parts rotary table that’s ideal for your work scope. Buy mine drilling rigs for your wholesale business at competitive prices. Chinese wholesalers provide you with customization options and great after-sales services.

Rufnek rotary table drives were explicitly designed to eliminate problems associated with drives located beneath the drilling rig floor. Our unique sealing and bearing design outlast the competition. We have your Rotary Table Drive needs covered with the two most common sizes (27.5" & 37.5") available.

The Hacker International HTD Rotating System is designed and built as an efficient and economical compliment to drilling rigs utilizing a top drive drilling system. Whether a rig build or a retrofit to an existing rig, the Hacker HTD can be designed to fit any application, any size, and is engineered for the most rugged drilling conditions. Hacker International is world renowned for its custom built rotary tables which are being utilized on every continent in the world. We pride ourselves in our innovative designs and our ability to solve specific needs of our customers in each custom rotating system we build.

The new HTD units are available in sizes 49.5”, 37.5”, 27.5”, 22.5”, 20.5”, and the ever popular 17.5”. Custom built units are also available for 15”, 12.5” and 10.5” rotating systems. Hacker also sells any type of bushings required to satisfy our customers’ needs.

With a maximum torque of 25k ft. lbs., a rotating speed of 135 rpm’s and with a static load rating of 1250 tons, our 27.5” table is a brute able to withstand harsh drilling conditions but easily controlled by the movement of a joy stick. These high torque variable speed features make this rotating system the perfect complement to your top drive system.

All of our tables are equipped with precision machined spiral bevel gears and heavy duty main thrust bearings to provide long lasting durability. The dual locking system utilizes ratcheting lock pawls that engage the rim of the table assembly. This enables the table to be locked in a single direction or both directions. The entire pinion shaft assembly uses a sealed cascade lubrication system from a large oil reservoir.

All Hacker Rotating Systems are field-proven, efficient and reliable giving our customers many years of reliable service. And if repairs are needed for any of your drilling rig components don’t hesitate to call us 24/7. Our fully staffed component repair facility and fabrication shop has a 30 ton lifting capacity with 25 feet under hook clearance.

We have a refurbished National C-495 Rotary Table for sale. This piece of used rig equipment from National Oilwell is supplied complete with a ring. It also comes with a split adapter for 49 1/2 inches to 37 1/2 inches. At the bottom of this page, you will find a scan of the Certificate of Compliance for this National rotary table from American Block.

A rotary table is a piece of rig equipment sometimes referred to as a turntable. The majority of rotary tables or turntables are driven by a chain (much like a heavy-duty bicycle chain). This chain needs to be kept well lubricated, in order to stop it from seizing up.

Most rotary tables, including the refurbished National C-495 rotary table we have for sale, are fitted with a rotary lock. When this lock is engaged, it can stop the turntable from moving at all, or just in one specific direction. A National rotary table might be used by rig crew instead of tongs, to facilitate the fabrication of break out pipes.

Maintenance of this type of rig equipment is pretty straightforward. There are rotary bushings in the middle of the turntable. It is these bushings that are connected to kelly bushings to produce the rotation needed for drilling. Removing these bushings allows other pieces of rig equipment, such as drill bits, to be pushed through the turntable. The hole in the middle of the National C-495 rotary table is known as the bowl. The bowl is where slips are put, to keep the drill string held up during connections and pipe trips.

Below, is the Certificate of Compliance for this National Oilwell rotary table. It was issued in 2013 by American Block. We have also included recent photographs of the turntable.

This particular unit is in very good condition, and available directly from stock. Meaning no lead times. Furthermore, our pricing is competitive. Buying used rig equipment that has been well maintained, can deliver significant cost of ownership savings.

We specialise in buying and selling used rig equipment, and have done so for almost 20 years. Our team understands the specific buying challenges faced by modern oil operators. Every increasing production costs make buying used equipment such as this National C-495 Rotary Table an attractive option.

If you would like more information about this National Oilwell rotary table, our team will be happy to provide it. You can contact them directly by calling +971 6 526 2556 or emailing sales@irefzco.com. Alternatively, send us a message using our contactform.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Welcome to Pickett Oilfield’s rotary tables web page. Our company has been in the oil & gas drilling equipment industry for over 38 years, supplying new and used rotary tables and rotary equipment to customers in practically every producing region in the world. We are here to serve all your drilling equipment needs – if you don’t see it on this site, just give us a call or email. We can get it, if you need it!

Pickett Oilfield, LLC offers prospective buyers and extensive selection of quality new and used oil & gas drilling equipment, including rotary tables to choose from at competitive prices. Browse our inventory of rotary tables and rotary table drilling components for sale at competitive rates.

A rotary table used in conjunction with a mill allows a machinist to produce virtually any part they can design. Sherline’s rotary table is a precision piece of equipment that has been designed to work with their vertical milling machines. However, it can be used on any mill whenever the small 4-inch size would be an advantage. The only limits are size, not complexity.

The table is 2″ high and 4″ (100mm) in diameter. The main components have been machined from solid bar stock steel, and the complete unit weighs seven pounds. The table has been engraved with a laser, giving sharp and precise lines every 5°, numbered every 15°. These lines are calibrated with the 72-tooth worm gear that is driven by the handwheel. The handwheel is divided into 50 parts, making each line on the handwheel 1/10°. This allows a circle to be divided into 3600 increments without interpolation. Seventy-two revolutions of the handwheel rotate the table one revolution.

The rotary tables can hold more weight when they are not under a continuous load. Click on the Video tab above to see examples of different weights and uses for our rotary tables.

The table T-slots are identical to those used on the Sherline mill and lathe, making the vast line of Sherline tooling available for use with this product. Two hold-down clamps and T-nuts are provided with the table. Also included is an adapter that allows Sherline’s 3- and 4-jaw chucks to be screwed directly to the rotary table. An optional right-angle attachment is available (P/N 3701) to mount the table in the vertical position to increase its versatility further. With the table mounted vertically, an optional adjustable right-angle tailstock (P/N 3702) can be mounted to the mill table. It is used to support and stabilize the other end of long work held in a chuck or otherwise attached to the rotary table.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

TSC RT series rotary table is provided with high reliability and serviceability. The rotary table structure has been designed to provide maximum strength to ensure larger load, increased safety and well-fit between bearings and gears. The table assembly was greatly simplified so it can be installed into the rotary housing and is easy to maintain. The RT series can be designed to meet the requirements of various drilling operations and work environments.

Jiangsu Xinxiang share Co., Ltd was founded in 1994, its predecessor was established in 1955, it‘s located in high-tech industrial concentration zone of Nantong City, Jiangsu Province; near to a new developing international deep-water port Yangkou Port which commitment to ship 200,000 tons goods; world famous modern city Shanghai is only 2.5 hours away from it by car; company registered capital is 60,000,000 RMB, the total assets is 119.85 million RMB, it covers an area of 160,000 square meters and currently over 500 employees. Jiangsu Xinxiang Share Co., Ltd is "self-import and export enterprise", "private technology enterprises in Jiangsu Province", "high-tech enterprises in Jiangsu Province", it is top ten companies of the first national large and medium-sized industrial enterprises in independent innovation capacity of the industry; it accessed to API7, 7K, 8A, 8C, and has the right to use the logo, and also passed the ISO9001:2000 quality system certification in the earlier stage within the same industry.

27-1/2″ New National Style Rotary Table w/Split Square Body Square Pin Drive Master Bushing (Chinese Origin) Stock Houston, TX – Six (6) Units in STOCK