ganro rotary table made in china

CNC Tilting Rotary Tables are two axes (4th & 5th Axes) units and can rotate the component in two axes making a machine capable of accessing the areas which can not be reached with only 3 axes. Tilting tables can also interpolate with machine axes to generate profile such as impellers. Using Tilting Rotary Table a standard 3 axes machine can be converted into a 5 axes machine.

The new CNC Rotary Table from GANRO has got higher speed and higher clamping torque. Thus making it suitable for machining complex components like turbine blades, when used in synchronous with machine axes.The new CNC rotary table DR Series has got better aesthetics. Further provides higher productivity and are available with Right Hand, Left Hand or Rear Motor mounting arrangement.

Brand new model with pinion gear and two bearing. High load bearing design with high loading capacity that increases the Life time making th transmission more effective. campact design is suitable for limited room

"Big size embedded table to make 5 axis simultaneous machining function which is economic benefits investment. HPD series is suitable for large size of vertical or horizontal machining center and can enhance the machining acccuracy and cut the machining time. Immediate effect can be obtained.

GANRO makes every rotary table based on this concept from every single part to a complete rotary table. Even a small screw will decide if a machining center can achieve the most profitable function.

From 1978, Golden Sun Industrial Co., ltd. maintains quality and value in making rotary tables utilizing advanced technologies, GANRO Industrial Corp, was established in 2008 to meet the high standard and demands from our customers all over the world. The spirit of pursuing perfection of Golden Sun is fully passed on to GANRO.

GANRO is convinced that a perfect work isn’t made without a foundation. As everyone knows that German and Japanese manufacturers keep most strict standards to make rotary tables. Their standards and attitudes to make rotary tables are GANRO’s motive power that keeps GANRO walking forward.

GANRO has the courage to uphold the spirit of the challenge and example the experience of OEM with famous European US and Japanese companies to mark a whole new record like our maxim “Gain the road to success”, GANRO not only pursues the invention of advanced technology and strict inspection of quality control, but also keeps putting ideas into practice.

Found in 2000, Ocean Techologies Co., Ltd. is one of leading manufacturers and supplier of drilling EDM and EDM parts such as wire EDM, Rotary Table, PNC drilling EDM, ceramic guide, and so on. Also, we obtained CE certificated. In 2005, we sold over 200 sets machines worldwide. After years" efforts, we have become one of the leading manufacturers in this field. To meet the severe competition and to serve the customers more. We are strict to our quality of product standard in order to make customer have good right. Besides, we also provide excellent service to our customer. We guarantee we must make you satisfy with our product and service. Welcome to visit our website and hope you could get the products which you are interested in or more information.

TJR Precision Technology, a known manufacturer of Rotary tables, is found in 2009. Since its establishment, we have focused on the R&D and manufacturing of high-precision key components for CNC machine tools, such as CNC Rotary Table, Rotary Table, index Table, and other accessories with high precision and stability. Our products are mainly used in the aerospace industry, high-tech electronics industry, automotive component manufacturing, multi-faceted spiral processing industry and various industrial machinery. We have the best research and development team that integrates the applications of machine centers and Rotary tables, and have the strictest quality control to ensure the highest quality. We also have the most active customer service to make the Rotary Table work in the optimal condition....

Spintop has been specialized precision Rotary Tables for more than two decades. Our CNC/NC Rotary tables are designed with many different size apertures, Table diameters, and mounting options to provide the ideal solution for your industrial automation application. Our products are widely used in industrial robots, fiberoptics and photonics, vision systems, machine tools, semiconductor equipment, medical component laser machining, electronic manufacturing, and other high-performance industrial automation applications. Welcome to visit our showroom to view relative products: CNC Rotary Table, Double Axis Tilting CNC Rotary Table and Tailstock Rotary Table, NC Rotary Tables and more. If you need the further details of our Rotary tables, please kindly contact us at any time.

TANSHING ACCURATE INDUSTRIAL CO., LTD. is one of the Rotary Table and index Table manufacturer. We have passed the ISO9001 quality system certification. We insist on the concept of "Quality first, prestige important", and after continuous innovation and development, the products have been widely used in many fields. Not only the products sold well in the world"s market, but also have enjoyed a good reputation in the markets. We offers the customers with Rotary Table of excellent quality and best service, hope to build a new brilliant with you in the future.

On a manufacturing area of 12,000 square meters, HOSEA PRECISION has been focusing on producing high precision Rotary tables that meet the quality standards in western markets. Our Rotary tables have been sold & widely used in the European market and have an enormously high reputation amongst our customers. More and more manufacturers across Europe cooperate with us and make use of our 5 axis Rotary tables, Rotary Table and other products. With a Hosea Rotary Table you always know what you get: a quality product that was manufactured in a quality production process - from start to finish. With this attitude and as a member of the Taiwan Machine Center Alliance, we continue to provide the best products for the high-tech machine tool industry of today and the future.

Multiplas Enginery Co.,Ltd. was established in 1988 and is the professional injection molding machines and Rotary Table manufacturer in Taiwan. We believe that our professional experience and reasonable prices will help you in your market bring much more business for you. Your suggestion always welcome, and we are looking forward to cooperating with you and a mutually profitable relationship. If you are interested our products, contact us, we will offer you the best price and superior high quality. We wish to have a long term business relationship with you.

Pan Uni Technique Co., Ltd. is a factory specializing in Rotary Table, plastic welding machines, PP case sealing machines, folding machines, plastic forming machines and so on. Recently, with the speedy technology advances, keen competitive markets and strict quality standards, the materials for plastic products have been keeping on innovating and developing. To keep up with the trends, we replace the human-manipulated machines with advanced and wholly automatic machinery and make strict demand on processing quality and figure examination. Only making relentless efforts on the fields of technique and production management can we meet the customers" need. If you want to get more information about our products, please feel free to contact with us.

Saynen manufactures CNC Rotary tables for machining centers with rich experiences, vast industry knoledge and expertise. Based on our nearly 50-year experience in this field, we can produce high-precision Rotary tables. All our products can be used in both vertical & horizontal directions to accommodate the requirements of various machining facilities. To ensure our quality, we developed an inspection system with the Mechanical Industry Research Lab at Industrial Technology Research Institute. Due to the mentioned experience and new investment, we are able to produce major parts in house, under strict QA system in order to best control the quality. We deeply believe that our Rotary tables can compete with those similar products made in Japan, USA, Germany and so on. Contact us for more!

Kinn Shang Hoo Iron Works has spent 40 years of experiment and research to manufacture food processing machinery, adopt automatic machines to reduce cost and lower the price for the customers. Our food machinery including meat mincer, Rotary Table, oven, meat slicer machine, mixing & seasoning machine, boiler, smasher, dryer and shaping machine. Due to our consistent high product quality and reasonable price structures, our products have won popularity among clients around the world. Now express heartfelt thanks to the supports. We will increase output to reduce the machines’ cost and as soon as possible to improve the quality of products. To supply a reasonable price for customers. Thanks for comments.

In the CNC Rotary Table industry, Exact Machinery is a national-wide famous provider who specializes in the design, production and sale of a variety of Rotary tables. All tables can be position in horizontal and vertical used. Each model with a standard-size tabletop fitted with or without T slots and a precision center pilot hole for alignment and clamping of the fixture or piece parts. With our years of experience and technical know-how, we are confident that we have the ability to supply CNC Rotary tables available to suit most applications in the metal cutting industries. We also provide lots of different Rotary tables for special application such as with pallet changer system by request. Please feel free to inquiry us to get more information.

GANRO make every Rotary Table based on this conception from every single part to a complete Rotary Table. Even a small screw will decide if a machine center can achieve the most profitable function.

From 1978, Golden Sun Industrial Co., ltd. holds the spirit of the devil’s in the detail to make Rotary tables released in the market. With the advanced technology, GANRO Industrial Corp. was established in 2008 to meet the high standard and demands from our customers over the world. The spirit of pursuing perfection of Golden Sun is fully passed on to GANRO. We stand on solid ground and innovate more...

TJR Precision Technology co., Ltd. is a professional manufacturer of CNC Rotary tables (the 4th and 5th axis). The main products are CNC Rotary Table, CNC index Table, and other accessories with high precision and stability.

We have the best research and development team that integrates the applications of machine centers and Rotary tables, and have thestrictest quality control to ensure the highest quality. We also have the most active customer service to make the Rotary Table work in the optimal condition.

GSA TECHNOLOGY CO., LTD. established in 1978, from time to time, our growing of devotion work stable, keeping in mind of honesty, faith, profession and innovation, nonstop communication and promotion of critical quality procedure, ensure every products could meet high quality of duration and precision.

detron Machine Co., Ltd. is a professional manufacturer of CNC Rotary tables. With the company"s policy of sincerity, practicality, professionalism and perseverance, we have dedicated ourselves to technological R&D and innovation. This is combined with our rigorous quality control system to ensure each Rotary Table from detron will present outstanding quality. In addition, we have also invited several machine tool design engineers to join together with our R&D team. This joint force enables us to achieve the best possible integration between the machine tool and the Rotary Table, therefore maximizing the Rotary Table performance. The outstanding quality of detron CNC Rotary tables is competitive with imported products and this is the major reason why detron CNC Rotary tables have been recognized...

MATSUMOTO MACHINE CO., LTD. is a manufacturer and sales of peripheral equipment for machine tools, Hydraulic chuck and 2 to 9 jaws and/or long stroke special chucking systems High speed High accuracy NC Rotary Table.

The state-of the art in house produced ocean Technologies Rotary Table can fully submerged in water. The isolation grade of IP68 Rotary Table employs motorized spindle that features outstanding accuracy performance.

1. Five face or multiple direction processing 3 axis cnc machine plus this two axis nc Rotary Table, it is able to do 4-axis or 5axis stimulate processing.

CNC Rotary tables are attachments for machining centers. It is known as the 5th axes in Taiwan. A good 4th axis must basically possess the characteristics of “indexing accuracy” and “repeated accuracy.” In order to achieve high accuracy, the 4th axes must have good warm gears and warm sets, as well as precision construction. Based on our nearly 50-year experience in producing high-precision gears, we are able to produce high-precision warm gears and warm sets. In addition, we specially purchased a CNC boring machining center from Toshiba, Japan to produce high-precision construction. Also, to ensure our quality, we developed an inspection software with the Mechanical Industry Research Lab (MIRL) at Industrial Technology Research Institute (ITRI). Due to the mentioned experience and new investment,...

NCT tables are designed with axial - radial bearings to provide excellent load and thrust capabilites. The hydraulic clamp produces a massive holding power and the housings withstand any twisting or flexing. The large center bore series provides for added flexibility when adding work holding devices.

A rotary table is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical) axis. Some rotary tables allow the use of index plates for indexing operations, and some can also be fitted with dividing plates that enable regular work positioning at divisions for which indexing plates are not available. A rotary fixture used in this fashion is more appropriately called a dividing head (indexing head).

The table shown is a manually operated type. Powered tables under the control of CNC machines are now available, and provide a fourth axis to CNC milling machines. Rotary tables are made with a solid base, which has provision for clamping onto another table or fixture. The actual table is a precision-machined disc to which the work piece is clamped (T slots are generally provided for this purpose). This disc can rotate freely, for indexing, or under the control of a worm (handwheel), with the worm wheel portion being made part of the actual table. High precision tables are driven by backlash compensating duplex worms.

The ratio between worm and table is generally 40:1, 72:1 or 90:1 but may be any ratio that can be easily divided exactly into 360°. This is for ease of use when indexing plates are available. A graduated dial and, often, a vernier scale enable the operator to position the table, and thus the work affixed to it with great accuracy.

Rotary tables are most commonly mounted "flat", with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the workpiece "between centers."

With the table mounted on a secondary table, the workpiece is accurately centered on the rotary table"s axis, which in turn is centered on the cutting tool"s axis. All three axes are thus coaxial. From this point, the secondary table can be offset in either the X or Y direction to set the cutter the desired distance from the workpiece"s center. This allows concentric machining operations on the workpiece. Placing the workpiece eccentrically a set distance from the center permits more complex curves to be cut. As with other setups on a vertical mill, the milling operation can be either drilling a series of concentric, and possibly equidistant holes, or face or end milling either circular or semicircular shapes and contours.

* With the addition of a compound table on top of the rotary table, the user can move the center of rotation to anywhere on the part being cut. This enables an arc to be cut at any place on the part.

Additionally, if converted to stepper motor operation, with a CNC milling machine and a tailstock, a rotary table allows many parts to be made on a mill that otherwise would require a lathe.

AS a result, GANRO’s R&D team works side-by-side with onsite operators to ensure the manufacture of every single part including the table assembly of the rotary tables. As explained by Sales Department Representative Eric Kuo “Even a small screw will decide if a machine center can achieve the most cost-effective function.”

Mr. Kuo: Our index tables are very important for multi-face machining, and for five-axis machine centers, especially on the ultra-precision machining. With the skilled strength of the 4th axis or the 5th axis installed on either existing production lines or machine centers, the targeted cutting processes is thus possible. In Taiwan, there are many index table suppliers gathering in the greater Taichung metalworking supply chain, offering both Taiwanese and foreign order requests, but we are different from them.

We have survived for nearly four decades, and over the years many rotary table makers established their businesses. I am confident that, GANRO, being the oldest table manufacturer in Taiwan holds the most advanced technology and solid experience in producing indexing tables. We make tables for machine tool suppliers and also to end users who have established production lines already, and also to those with urgent need of additional rotary tables for upgrading their existing production lines. In the ASEAN region, our rotary tables are purchased by many users from the automotive supplier chain for machining automotive parts with specific processing demands. In Mainland China, we assist many 3C suppliers in making high- precision small components because we are capable upgrading their manufacturing lines with attention to detail. We can help not only in terms of tables, but also production line planning.

In the European region, we also sell our rotary tables to suppliers in the automotive and aerospace sectors. With the many experiences accumulated through those cooperation, we are able to assist various production lines with their tables and technology.

Mr. Kuo: The GANRO TR-s series CNC tilting rotary table is a good example. This is sold to Japanese automotive manufacturers who have factories in Thailand and Indonesia. We support their existing machineries at their production lines to meet the latest order requests.

The TR-s series succeeded in helping ASEAN users smoothen manufacture processes in many factories. The maximal workload of TR-s series is of 200 kg. The repeatability (sec.) on TR-120S type is 8’’ (unidirectional) and 16’’ (bidirectional), promising rigid precision. On TR-320S type, the repeatability is 4’’ (unidirectional) and 8’’ (bidirectional). This table product enhances the efficiency of production lines by the many special features.

In addition, we are good at supporting machine tool manufacturers in the 5th axis construction. Our AR series CNC horizontal pallet rotary table is famous in the machine tool sector. The product adopts double lead worm shaft design as the crucial transmission mechanism. The double lead worm shafts have different lea, and lead angles on the right and left sides. The tooth space of our double lead worm shaft is between 0.005 mm and 0.01 mm, which is a high standard and we are the supplier who offer this accuracy as ordinary standard. The specification pushes the limit of micro-backlash. The max work load of AR series reaches to 650 kg, and the radial moment is 500 Kgf•m.

Mr. Kuo: Yes indeed. The ASEAN is a place where our products fit into their growing industrial demands. As the region now also encounters labor issues, GANRO’s rotary tables can help deal with the automation needs. We can help people dealing with difficult processing procedures by planning their existing production lines of course with our long-term experience in table making technology. I’m positive that in the next ten years, we will have a good business.

Manufacturers across the globe are always looking for reliable workholding devices to accommodate their manufacturing indexing and rotating requirements. CNC Indexing & Feeding Technologies has been proud to represent the complete Ganro Industrial Corp. (Golden Sun) product line of workholding rotary tables and indexers. Ganro has been producing a wide variety of workholding products to accommodate manufacturers for over 30 years. To help a company decide which table is best for its applications, it is beneficial to understand the proper use and capability of each workholding device. CNC Indexing and Feeding Technologies offers various Ganro workholding products.

Standard Rotary Tables: The sizes range from 120mm (4.72") to 800mm (31.49") in faceplate diameter and can be used as a full rotating axis incorporated into a machine"s control or as indexers with Ganro"s M-Mate AC servo controller. These rotary tables and indexers are all capable of being mounted in both the vertical and horizontal positions and have large thru-holes to give manufacturers maximum flexibility.

Large rotary tables: The large rotary tables are available in a range of 1000mm (40") to 2500mm (98") in faceplate diameter. They can be used as a full rotating axis incorporated into a machine"s control or as indexers with Ganro"s M-Mate AC servo controller. These rotary tables and indexers are all capable of being mounted in both the vertical and horizontal positions.

Rear Motor Mount: Ganro manufactures two of the most popular sized rotary tables with a rear mounted motor for smaller vertical machining centers. The rear motor mount rotary table design is available in the standard 170mm (6.69") and 250mm (9.84") faceplate diameters. As with other Ganro rotary tables, they can be used as a full rotating axis incorporated into a machine"s control or as an indexer with Ganro"s M-Mate AC servo controller.

CNC Indexing offers three types of Ganro standard rotary tables to accommodate a wide range of 4- and 5-axis manufacturing requirements. The standard tilt rotary table is a trunnion design with faceplate diameters ranging from 320mm (12.59") to 800mm (31.49"). This style is created to give manufacturers ample room for workholding and workpiece while providing clearance for the machine"s spindle and tool.

Compact Tilt: The compact tilt rotary table design comes in faceplate sizes of 150mm (5.90"), 200mm (7.87") and 250mm (9.84") and is ideal for smaller machining centers and smaller workpieces.

Manual Tilt: The manual tilt table is designed with a full 4th axis (rotating axis) and a manual tilting axis. It is available in sizes from 200mm (7.87") to 630mm (24.80") and is ideal if a tilting axis is only occasionally required.

Horizontal Rotary Table: This rotary table design is available with table tops ranging from 400mm (15.74") to 2500mm (98.42") square. Ganro"s horizontal CNC rotary tables can be used in various areas of manufacturing but are ideal for horizontal boring mill applications.

The HR Series design can be used as a full rotating axis incorporated into a machine"s control or as an indexer with Ganro"s M-Mate AC servo controller. They are designed for horizontal mounting only and offer high weight capacities for large workpieces.

Horizontal Index Tables: CNC Indexing offers two types of Ganro horizontal index tables for both manual and automated manufacturing processes. Both series of precision horizontal index tables use a two piece Hirth coupling design that provides superior indexing accuracy while maintaining high rigidity during heavy cutting.

CNC Index Table: The CNC Index Tables are clamped and unclamped with hydraulics and are designed to be incorporated into a machine"s CNC control or operated with Ganro"s M-Mate AC servo control system.

Manual Index Tables: The Manual Index Tables are clamped and unclamped pneumatically or hydraulically. Once unclamped the series is manually indexed to the desired degree and securely clamped into position.

Face Gear Rotary Tables: The Face Gear Rotary Tables are manufactured with a three piece Hirth coupling design to avoid lifting during rotation. The use of a Hirth coupling allows for the mounting of heavy loads while offering high rigidity and high accuracy. These tables are primarily used in applications incorporating a strong tailstock and a tombstone or fixture plate. It can be integrated into a machine"s control or operated through Ganro"s AC servo controller.

The index tables are available in four faceplate sizes (250mm, 320mm, 400mm and 500mm). Ganro rotary tables can provide a solution for rotating and indexing small workpieces to large workpieces, for vertical and horizontal applications, for 4-axis and 5-axis work and for manual and automated applications. Ganro products give manufacturers the capability of improving the manufacturing process by accessing multiple workpiece faces in one clamping. This improves workpiece accuracy and reduces manufacturing cycle times.

Ganro.eu is the European operation of Ganro Taiwan, providing technical support, sales and service for the full range of Ganro products. Ganro realise that it is important to have local support for its customers to provide confidence in the power and performance of the Ganro brand and the importance Ganro places in making sure its customers feel secure in the knowledge we are nearby should you need us.

Due to the COVID-19 pandemic and Russia-Ukraine War Influence, the global market for Big Bore Rotary Table estimated at USD million in the year 2022, is projected to reach a revised size of USD million by 2028, growing at a CAGR of % during the forecast period 2022-2028.

The USA market for Big Bore Rotary Table is estimated to increase from USD million in 2022 to reach USD million by 2028, at a CAGR of % during the forecast period of 2023 through 2028.

The China market for Big Bore Rotary Table is estimated to increase from USD million in 2022 to reach USD million by 2028, at a CAGR of % during the forecast period of 2023 through 2028.

The Europe market for Big Bore Rotary Table is estimated to increase from USD million in 2022 to reach USD million by 2028, at a CAGR of % during the forecast period of 2023 through 2028.

The global key manufacturers of Big Bore Rotary Table include NIKKEN KOSAKUSHO WORKS, TJR Precision Technology, UCAM, Samchully Machinery, PIONEER, Ganro, MMK Matsumoto and Sankyo Automation, etc. In 2021, the global top five players had a share approximately % in terms of revenue.

In terms of production side, this report researches the Big Bore Rotary Table production, growth rate, market share by manufacturers and by region (region level and country level), from 2017 to 2022, and forecast to 2028.

In terms of sales side, this report focuses on the sales of Big Bore Rotary Table by region (region level and country level), by company, by Type and by Application. from 2017 to 2022 and forecast to 2028.

This report aims to provide a comprehensive presentation of the global market for Big Bore Rotary Table, with both quantitative and qualitative analysis, to help readers develop business/growth strategies, assess the market competitive situation, analyze their position in the current marketplace, and make informed business decisions regarding Big Bore Rotary Table.

The Big Bore Rotary Table market size, estimations, and forecasts are provided in terms of output/shipments (K Units) and revenue (USD millions), considering 2021 as the base year, with history and forecast data for the period from 2017 to 2028. This report segments the global Big Bore Rotary Table market comprehensively. Regional market sizes, concerning products by types, by application, and by players, are also provided. The influence of COVID-19 and the Russia-Ukraine War were considered while estimating market sizes.

Some Questions Answered in the Big Bore Rotary Table Market Report: ● What will the Big Bore Rotary Table market size and the growth rate be in 2028?

Chapter 2:Detailed analysis of Big Bore Rotary Table manufacturers competitive landscape, price, output and revenue market share, latest development plan, merger, and acquisition information, etc.

Chapter 3:Production/output, value of Big Bore Rotary Table by region/country. It provides a quantitative analysis of the market size and development potential of each region in the next six years.

Chapter 4:Consumption of Big Bore Rotary Table in regional level and country level. It provides a quantitative analysis of the market size and development potential of each region and its main countries and introduces the market development, future development prospects, market space, and capacity of each country in the world.

Rotary table in market mainly includes 4 kinds of mechanism that is worm gear, roller cam, DD driver and harmonic structure. The following is the introduction:

1. worm gear: it’s one of  the most popular structrue in NC rotary table  because of its irreversibility and costs.The worm is generally made of bronze, but the wear resistance is poor. In order to improve the service life, some manufacturers use the alloy steel.

3.DD motor: it’s the most efficient rotary table with the highest precision. It has the highest precision because it has no mechanical structure, which is directly driven by motor , no reducer. It has high technical difficulty and high price. It is generally used for five axis machine tools.