gsa rotary table pricelist

2023-05-21 21:22:12

CNC Indexing & Feeding Technologies is proud to carry TJR Precision Technology rotary tables. All of TJR’s rotary tables incorporate a range of features that give them an edge over competitors, and the dual lead worm gear is at the top of the list. How Does A Dual Lead Worm Gear Work? With the dual […]

CNC Indexing & Feeding Technologies is proud to offer the best the industry has to offer in our complete line of Ganro Industrial Corp. rotary tables. While parts of a rotary table may seem the same no matter what brand you choose, the true test of quality lies in the equipment design. Ganro has been developing […]

gsa rotary table pricelist

A combination of high precision bronze / nickel worm wheel and case hardened steel worm screw ensures long term indexing accuracy. Dual lead worm wheel/worm shaft which allowable easy backlash adjustment. Double bearing design suitable for heavy cutting. One piece of faceplate and spindle design which offer rigid construction. Low Gear ratio design (90:1) which offer high speed feed rate. Large thru hole design which allowable large work piece going thru spindle.

gsa rotary table pricelist

Subgroups (Subgroups are provided for market research purposes only. Buyers should confirm specific contract offerings are available by verifying awarded products and services on the contractor"s GSA pricelist.)

Non Perishable foods- Includes non-perishable provisions and food service support, such as water filtration units, portable water, non-perishable subsistence meals, beverages, portable kitchen units, etc.

Roofing Products and Services Solutions- TEST - Includes roofing products, services and associated application materials. Includes sustainable, energy efficient/savings solutions, and installation and site preparation, related to and ordered in conjunction with products for repair or replacement of an existing roof.For ordering limitations and information, refer to the Special Ordering Procedures/Ordering Guide posted on www.gsa.gov

Temporary and Permanent Structures- Includes both temporary and permanent structures, such as portable roads, airstrips, helipads, ramps, and bridges.

Lease/Rental of Pre-Engineered/Prefabricated Buildings and Structures- 532490P Includes portable/mobile office buildings, restroom facilities, and temporary living quarters such as mobile homes and tension fabric structures. The lease or rental of these portable structures are suitable for emergencies and disaster recovery efforts.

Portable Flooring Solutions- Includes all portable flooring solutions, such as floors installed as a result of damage and flooring suitable for emergency or disaster recovery efforts.

Mail Sorting and Distribution Furniture (SBSA)- Includes tables, storage units, consoles, racks, workbenches and accessories designed to be used as interrelated components for the purpose of dumping, opening, reading, sorting, packing and/or wrapping both incoming and outgoing mail.

Wall Units and Displays SBSA- Includes wood construction with high-pressure laminate on all horizontal services, in addition to acoustic partitions, demountable walls, and vertical surface attachments and accessories.

Training Room, Auditorium and Theater Furniture- Training room, auditorium furniture and theater furniture including floor mounted ascending tier seating. Accessories designed to be used with the offered furniture are acceptable. Products meet applicable safety, performance and flammability requirements.

Lawn and Garden Equipment, Machinery, Implements, Tools, Products and Accessories- Includes, but not limited to: Mowers (all types) not to exceed 30 hp; gas and diesel tractors dedicated to lawn and garden without implements (excludes tractors with attachments enabling multiple or general purpose use such as loading, excavation, agricultural, highway or road maintenance or clearing, mowing construction, etc.); mowing implements; flail mowing units; boom mowers; sickle mowers; rotary mowing units; rototillers; snow throwers and blowers; grass, hedge and tree trimmers; edgers; blowers; vacuums; sweepers; sprayers; renovators; spiders; sod cutters; broadcasters; spreaders; seeders and other various lawn and garden implements (not tractor drawn or mounted). Tools including but not limited to: chain saws, lawn sprinklers, soaker hoses, garden hoses, grass shears, pruning shears, tree trimmers, pruning saws, weed whip cutters, rakes, spading forks, manure forks, brush hooks and garden hoes. Products include typical nursery and garden items, such as trees, shrubs, plants, seeds, fertilizer, bulbs, and sod.

Water Treatment Solutions- 325998W includes water treatment products and systems that filter out harmful substances, such as treated/potable water storage, septic treatment systems, etc. Services include water treatment, testing, and purification.

Scaffolding, Work, and Service Platforms- Includes scaffolding work and service platform items, such as manual, motorized, and adjustable height options for scaffolding; aerial lifts; man lifts; ladder systems; etc. Includes all options and accessories related to these products.

Power Distribution Equipment and Solar Energy Solutions- Includes power distribution equipment and services, such as portable light towers, uninterruptible power supplies, metering, transformers, electric motors (excludes automotive motors), motor controllers/motor control centers, repair and maintenance services, etc. Alternative and Renewable Sustainable Energy Solutions including Solar Energy Systems, Fuel Cells, Geothermal, and Wind Power. Includes all options and accessories related to these products and services.

Purchasing of New Electronic Equipment- Includes desktop, laptop, tablet computers (including rugged), servers, storage equipment, hyperconverged integrated systems, supercomputers, routers, switches and other communications equipment, IT security equipment (hardware based firewalls), audio and video (AV) equipment, public address systems, monitors/displays, sensors and other Internet of Things (IOT) devices, printers and Multi-Function Device (MFD) equipment, broadcast band radio, two-way radio (LMR), microwave radio equipment, satellite communications equipment, radio transmitters/receivers (airborne), radio navigation equipment/antennas, optical/imaging systems, and associated peripherals required for operations (such as controllers, connectors, cables, drivers, adapters, etc., ancillary installation of any equipment purchased.

Installation and Site Preparation Services- 238910 includes installation and site preparation services ordered in conjunction with buildings and structures, building materials, storage tanks/systems, services for alternative energy solutions or power distribution equipment, fuel dispensing & management systems, and security systems purchased under this schedule contract. For ordering limitations and information, refer to the Special Ordering Procedures/Ordering Guide posted on www.gsa.gov

Vendor-Owned/Vendor-Managed Inventory Services (VMI): Services such as resupply of designated items by the Vendor through regularly scheduled reviews of on-site inventory counts, removal of damaged or outdated goods, and the re-stocking of inventory to predetermined levels at their specified locations and customer support; and Vendor-Owned/Vendor-Consigned Inventory Services (VCI): Services where products will be entrusted to GSA or other ordering agencies and are under the control and custody of GSA or other ordering agencies while they are stocked at 4PL locations.

Ancillary Repair and Alterations- Includes ancillary repair and alteration services ordered in conjunction with the delivery, or installation of products or services. These services are non-complex in nature, such as routine painting, carpeting, simple hanging of drywall, basic electrical or plumbing work, landscaping. For ordering limitations and information, refer to the Special Ordering Procedures/Ordering Guide posted on www.gsa.gov.

Introduction of New Supplies and Services- Includes the introduction of new supplies, technology and services categorically related to items already on GSA contract, which may be in commercial development and/or not yet introduced to the federal government.

- Defined and priced at the ordering activity level in accordance with GSAR clause 552.238-115 Special Ordering Procedures for the Acquisition of Order-Level Materials.

Hazardous Waste Disposal Services- Services include, but are not limited to: Management and oversight of Hazardous Material (HAZMAT) disposal operations, and management, oversight and recycling of universal waste (e.g., batteries, cell phones, cathode ray tubes (CRTs), and compact fluorescent light bulbs (CFLs)). This includes reuse assessments and inventory, destruction, inventory transfer and/or disposal after compliance with GSA Office of Personal Property Management requirements outlined in Federal Management Regulations 101-42, 102-36, and 102-37 (as applicable). Examples of types of material waste services include, but are not limited to: Solid waste, industrial waste, mining waste, and oilfield waste (e.g., drill cuttings); Liquid waste (e.g., wastewater containing less than 1% solids); medical waste; pharmaceutical waste; excess inventory; surplus inventory; non-hazardous materials that pose no immediate threat to human health and the environment, excluding household waste (e.g., routine refuse collection and disposal); hazardous materials and/or those that contain leachable toxic components; plastics such as acrylic, nylon, high-density polyethylene (HDPE) and low-density polyethylene (LDPE); confiscated materials; and construction debris such as asphalt, drywall and/or metal.

Environmental Remediation Services- Environmental remediation services involving a range of services to return a contaminated environment into an acceptable condition, including but not limited to: preliminary assessment, site inspection, testing, remedial investigation, feasibility studies, remedial design, containment, remedial action, removal of contaminated materials, storage of contaminated materials, and security and site closeouts. The procurement must be composed of activities in three or more separate industries associated with separate NAICS codes. These activities may include but are not limited to, engineering services, management consulting services, hazardous and other waste collection, remediation services, testing laboratories, and research and development in the physical, engineering, and life sciences. At least 50% of the work must be for remediation services and not work under other industries.

NOTE 2: Any firm offering Identity Protection Services will be required to provide a System Security Plan (SSP) in accordance with the template found in IPS Requirement Document 1C. The firm will also be required to submit a Firm Fixed Price as outlined in IPS Pricing Document 2, unless otherwise defined at the Task Order level (e.g. per product redeemed per the agreed-upon coverage period (month, year, etc.) ) covering ALL services cited in Section I of IPS Requirements Document 1A. If defined otherwise at the Task Order level, it must still be able to be mapped to the awarded Schedule contract pricing. Firms are encouraged to provide separate line item pricing for key services within this total solution SIN that the firm believes could be ordered independently (e.g., credit monitoring, restoration, etc). This will allow the Ordering Agency to obtain only those services needed depending on level of breach. See IPS Pricing Document 2 for pricing tables.

NOTE 4: The Agency Ordering Guide for Identity Protection Services can be found at https://www.gsa.gov/buying-selling/products-services/professional-services/buy-services/identity-protection-services-ips

Photographic Services and Solutions- Includes a full range of Photographic Film, Imaging, Digital Services and Multimedia Duplication, Conversion Services and Web-Site Photo Storage Services. Film Processing Services include all sizes, colors and types (e.g., negatives, microfilm, 16/35mm & intermediates color reversal, reprints, duplicates of slides and prints enhancements, enlargements, filmstrips & slides (e.g., master filmstrip photography, master original (2x2) slide photography and duplicate, color positive filmstrip and color positive (2x2) slide duplicate). Imaging/Digital Services include (e.g., desktop, scanning, photo finishing, output retouching, photo restoration and recovery, aerial, archiving, C-41 negatives and inter-negatives digital photography & darkroom passport photos, electronic file transfer, imaging client-generated slides, mounting or prints, presentation slides and portable displays. Portable Displays are imaging exhibits used for (e.g., trade shows, displays, presentations, meeting and conferences) which comes with various configurations e.g., headers graphics, lights shelving, back lighting, and photo mural and panel inserts. Includes a wide range of media duplication (e.g., film-to-film, tape-to-tape, CD-to-CD, disk-to-disk) and conversion services (e.g., film-to-tape, tape-to-film, film-to-CD, CD-to-internet, tape-to-CD, microfilm-to-tape, photo-to-slides, files-to-presentation slides). These services consist of any media of choice. Other direct related services may include (e.g., editing, scanning, restoration, sound services (music score, sound effects, sound track quality and other sound-related services), internet, video tape captioning and subtitle services, edge numbering, scratch removal, print cleaning, packaging, film treatment, loading of cassettes, animations and time encoding. Under Web-Site Photo Storage Services, customer pictures are scanned and posted to a web site maintained by the vendor on a short/long term basis. The customer can then view the scanned

An implementation guide for Space launch Integration Services (SLIS) can be found at www.gsa.gov/psschedule - click on "Professional Engineering Solutions".

Laboratory Refrigerators And Freezers- Includes reach-in and walk-in refrigerator and freezer configurations suitable for blood banking, chromatography, mortuary, and other special-use cooling or freezing requirements. Excludes all household, commercial or display case refrigerators and freezers.

NOTE: The GSA FIPS 201 Evaluation Program defines product categories for the FIPS 201 APL as required to implement the mandates in OMB Memoranda M-05-24 and M-06-18. For the avoidance of doubt, ONLY THOSE PRODUCTS FOUND ON THE GSA APL ARE FIPS 201 COMPLIANT. All approved products can be found on the APL (Approved Products List) at idmanagement.gov.

Vocational Vehicles- Utility & Telecom Construction Equipment and Attachments: Includes but not limited to: Service and Line Body Trucks, Personnel Lifts, Digger Derricks, Cable Placers. Special Vocation Vehicles and Attachment: Vocations include but not limited to: Blood Donor, Dental, Laboratory, Medical, Clinical, Healthcare, Mobile Command, Concession, Sound Stage, Emergency Response, Communication, Broadcast, Electronic News Gathering, Training, Marketing, Troop Transport, Patient Evacuation, and related options and equipment. Platforms include but not limited to: Truck, Van, Semitrailer, Trailer, Bus, and Motorcoach. Aircraft Ground Support Vehicles and Equipment: Includes but not limited to: Catering Highlift Trucks, Cabin Service Highlift Trucks, Handicap Passenger Highlift Trucks, Stake Bed Highlift Trucks, Narrow Passenger Stairway Trucks, Wide Body Passenger Stairway Trucks, Lavatory Trucks, Washers and De-icer Maintenance Lifts, Potable Water Trucks, Lavatory Carts, Belt Loaders, and related accessories. Waste Disposal Vehicles and Attachments: including but not limited to: Refuse Vehicles and/or Trailers; Recycling Vehicles and/or Trailers; Hazardous Waste Disposal Vehicles and/or Trailers; and Liquid Waste Vehicles and/or Trailers, Roll-off, Hoist, and Hook Lift Trucks.

Tank Trucks- NFPA 385 & 407 compliant Fuel and Petroleum tank trucks Including but not limited to Bulk Fuel Haulers, Ground Fuel Servicing Trucks (single and multiple product), Aircraft Refueling and De-fueling Tank Trucks. Potable and Non-potable Water Trucks, Street Flushers, Dust Control Spray Trucks, and Trailers. Related equipment and accessories and related equipment.

gsa rotary table pricelist

Our online store aims to cater to your professional needs, ranging from motion and flexibility testing, manual muscle testing, evaluations, combination therapy machines to blood flow restriction devices. Please scroll through our online store to find classic exercise machines that help develop stamina, coordination, and strength, or treatment tables for patients to comfortably rest in various positions. Also, find ultrasound equipment to treat and identify areas under the skin that are stressed, fractured, or cracked.

Are you looking for a wholesale tilting rotary table? Alibaba.com is the place to go. If you have many devices that require an internet connection, but your router has fewer ethernet ports a tilingting rotory table is a must-have. This switch connects devices to a network commonly referred to as a LAN and transmits data packets. One thing to note about a network switch is that it transmitters to data allocated one. This might be a router, computer, or another switch. this switch can also help you increase the internet speed delivered to your devices.

Alibaba.com remains home to one of the largest inventories of both used and new tilting rotary table. If you run a rental equipment shop, then the supply at Alibaba.com will be a great place to browse. From tractors and excavators, skid steers and forklifts to dozers and backhoes for your construction, everything you need, Alibaba.com has it. The product variety goes beyond loaders and utility trailers, cranes, and dump trucks to small ones used to compress and package materials. The dairy and food processing equipment will be a good category to look through if you operate a farm.

gsa rotary table pricelist

After adding four-axis or five axis rotary table on the machine tool, multi axis machining can be realized, which can improve the machining efficiency and yield. With the improvement of manufacturing automation in China, the demand for rotary table increases significantly.

Now, I will introduce the situation of several rotary table brands in China. We will divide them into four categories: Europe andAmerica, Japan, Taiwan and Chinese brands.

Taiwan: TJR, Detron and GSA are the main brands, as well as DEX, Autocam and HW. These rotary tables are not only configured on Chinese brand machine tools, but also sold to end customers. Their precision is not high and their service life is not long, but they can meet the requirements when machining parts with low precision. Some users will consider these brands when their budget is limited. Among these brands, TJR has the best sales volume, with an annual sales volume of more than 10000 sets, because they have the most complete distribution network, complete models and cheap prices.Most importantl

China: there are many locally four-axis brands in China, such as Gutia,Silvercnc, Blue tech, CP and Deshu. The product quality of these brands is comparable to that of Taiwan. Due to more favorable prices and fast delivery, they have occupied the market of most Taiwan brands. The four axis of Chinese brands mainly adopt roller cam structure or harmonic structure. The wear resistance of roller cam is better than that of worm gear, with long service life and good accuracy retention. The price of harmonic reducer rotary table is low, which is suitable for 3C industry. These two structures meet the needs of the market and have been recognized by customers.

gsa rotary table pricelist

Lifetime WarrantyAllsteel Inc. warrants its products to be freefrom defects in material and workmanshipfor as long as the original purchaser ownsthem, except as set forth below.• #19, Access, Acuity, Clarity, Relate, andSeek mesh/carriers are consideredstructural chair components and as suchare warranted for as long as the originalIntroductionAllsteel shall repair or replace withcomparable product (at Allsteel’s discretion),free of charge, any Allsteel product orcomponent manufactured after August 6,2012 that fails under normal commercialoffice use.This warranty is subject to the followingprovisions:purchaser owns the chair.• Reed LED undercabinet light — fixturewarranted for 3 years; power supplywarranted for 1 year• Link LED light — 5 years• Wand LED Lighting — fixture warrantedfor 5 years; power supply warranted for3 years• Beyond Architectural Walls — 10 years.Some natural variations occurring in wood,leather, or other natural materials are inherentto their character and not considered defects.Moving parts such as door hardware anddoor mechanisms — 5 years. Customer’sown hardware — supplier warranty.Allsteel does not warrant the colorfastnessor matching of colors, grains, or textures ofthese materials. Additionally, a Customer’sOwn Material (COM) selected by, and used atthe request of, a user is not warranted.The materials and components listed beloware covered according to the followingschedule from the date of sale:This warranty does not apply to:• Normal wear and tear over the course ofownership including fabric puddling• Damage from sharp objects (e.g., writingutensils, heeled shoes, scissors, jewelry,keys)• Modifications or attachments to theproduct not approved by Allsteel• Wood products and electrical components(lamps and ballasts are not covered),seating controls, pneumatic cylinders,glides, casters and polymer-basedcomponents, and foam — 12 Years• Wood seating, stacking chairs, Sum ®AutoFit ® technology, and laminates —10 Years• User-adjustable worksurface mechanisms,tablet arm mechanisms, interior woodframedseating and lounge products,occasional tables, Scout ® mesh, paneland seating upholstery fabrics, and other• Products not installed, used, or maintainedin accordance with product instructions andwarnings• Products used for rental purposes• Damage caused by the carrier in-transit,which is handled under separate terms• Third-party products. Allsteel, to the extentpossible, will pass through to the originalpurchaser (and process claims under)any warranty provided by manufacturersof under-cabinet lighting, ergonomicwork tools, or other third-party productssupplied by Allsteel.covering materials — 5 Years• Marker board surfaces and upholstery onGather products — 3 years• #19 ® , Access , Acuity ® , Clarity , Relate ® ,Sum, Trooper ® asynchronous andsynchro‐tilt models, Scout, Seek ® , andInspire ® are warranted for multiple shiftsand users up to 300 lbs. All other Allsteelchairs and components are warranted forsingle-shift, 40-hour workweek usage.• #19 chair, including components andmaterial, is warranted for as long as theoriginal purchaser owns the chair.TO THE EXTENT ALLOWED BYLAW, ALLSTEEL MAKES NO OTHERWARRANTY, EITHER EXPRESS ORIMPLIED, INCLUDING ANY WARRANTYOF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE.ALLSTEEL WILL NOT BE LIABLE FORANY CONSEQUENTIAL OR INCIDENTALDAMAGES.This warranty applies only to products soldwithin the United States of America and theCommonwealth of Canada. Your AllsteelDealer is our mutual partner in supportingyour warranty requests. To obtain serviceunder this warranty please contact yourAllsteel Dealer.Seating & Tables – 3/2013 allsteeloffice.com | 5

IntroductionExpress Solutions ® All orders guaranteed to deliver in 10 working days or less.Special E Program Terms:Program Terms and ConditionsItems available in theExpress Solutions programare indicated throughout thepricer with E .• All Express Solutions orders are guaranteed ready to deliver in 10 business days or less from acceptance oforder to any destination in the contiguous 48 states and select metropolitan areas in Canada.• Guaranteed delivery for orders over $50,000 list! Delivery will be made no later than two hours of the agreedupon appointment time*.• Ten (10) business days does not include weekends, national holidays, or Allsteel holidays. The day the orderis accepted counts as day zero (0).• The ten (10) day clock does not start until the order is released by the Allsteel Credit Department.• All orders must be received by 3 p.m. Central Time to be keyed that day. Orders must clearly state “ExpressSolutions Order.” EDI orders or fax to 1-888-329-3123.• Express Solutions orders will ship on the lane date closest to the 5 day acknowledgement window with aguaranteed delivery within 10 days or less, no matter where in the continental U.S. it is going.• All E orders must include a deliverable address (number, street, city, state, zip) and a contact name and phonenumber.• Orders received for E product must include only E identified product. Product included in an order that is notindicated as E in the pricers will cause the whole order to be acknowledged as regularly manufactured product.• A non‐discountable line item surcharge calculated at 2.5% of List Price will be applied to all ExpressSolutions orders.• E orders are eligible for bid pricing.• E orders are limited to a maximum of $175,000 list.• Orders cannot be changed or canceled after order entry, and will be shipped complete.• Seating, Essentials Pedestal, and Essentials Lateral models for E are identified by a “Q” prefix in themodel number.• Large quantity orders of like products are subject to review.• For complete Sales and Purchasing Terms and Conditions refer to the Allsteel Sales and Discount Policies.* Allsteel reserves the right to choose the carrier on guaranteed deliveries and is not liable for service delays caused by force majeure(circumstances beyond Allsteel control).6 | Seating & Tables – 3/2013

Swift Seating ® This program ships the most frequently ordered chairs in 48 business hours tolocations in the U.S. and Canada.Swift Seating Program Terms and ConditionsProgram Terms and ConditionsItems available in theSwift Seating program areindicated throughout thepricer with 2 .• The Swift Seating program is limited to the models, fabrics, and finishes listed in the Swift Seating Pricer andelectronic catalog.• All Swift Seating orders must be faxed or sent via EDI to Allsteel Order Entry.• All Swift Seating orders must have fully optioned model numbers.• All Swift Seating orders must be placed by 3:00 pm Central Time. Orders received after this time will be treated ashaving been placed on the following day. The day the order is accepted counts as day zero.• All Swift Seating orders must be stand-alone orders and cannot be bundled with other product.• All Swift Seating orders must clearly state “Swift Seating Order” and reference the following Contract Numbers:– Contract # 4522 for Standard Freight.– Contract # 4523 for Priority Ground.• Maximum order quantity is 20 chairs per order.• All Swift Seating orders are priced at standard dealer discount and are not eligible for additional discounts.• Swift Seating orders are not eligible for bid pricing.• Swift Seating orders cannot be changed or canceled after order acknowledgement by Allsteel and products subject tosuch orders will ship complete.• All Swift Seating orders ship in two (2) business days.• The two business day timeframe does not start until the order is released by the Allsteel Credit Department.• The two business day timeframe does not include weekends, national holidays, Allsteel holidays, or annualinventory days.• All Swift Seating orders must include a deliverable address (street number, street name, city, state, and zip code) fora dealer warehouse with dock access and a contact name and phone number.• All Swift Seating orders will only ship to dealer warehouses and not to residential or end-user locations.• Standard freight terms are free freight for all Swift Seating orders, subject to Section 16 below.• The Swift Seating program offers two different freight options:– Standard Ground is free freight.(Please refer to the map on page 4 of the 5/2011 Swift Seating PDF.)– Priority Ground at an up-charge of $25.00 per chair.(Shipping days are one day less than standard ground.)• Dealer agrees to accommodate delivery times.• Deliveries will be made by 5:00 pm the day of the delivery.• Deliveries will be made no later than (2) hours after the pre-determined appointment time.• Allsteel reserves the right to choose the carrier on all deliveries and is not liable for service delays caused by thecarrier or other force majeure events (events/circumstances beyond Allsteel control).• Please refer to the current Allsteel Inc. Dealer Sales & Discount Policies for complete Sales and Purchasing Termsand Conditions.IntroductionSeating & Tables – 3/2013 allsteeloffice.com | 7

Seating OverviewSeatingSeating (Arm and armless versions available for most models.)#19 ® pages 14-17 Acuity ® pages 18-23 Sum ® pages 24-31Overview of SeatingGSA Multi‐purpose SeatingHigh‐backWork ChairHigh BackWork ChairHigh-backWork ChairMid-backWork ChairHigh-backStoolMid-backStoolRelate ® pages 32-49High-backWork ChairMid-backWork ChairHigh-backWork StoolMid-backWork StoolSide Chair4-Legged StoolTrooper ® pages 50-59Scout ® pages 60-67High-backWork ChairMid-backWork ChairTrooper LTWork ChairWork StoolUniversal BackWork ChairUniversal BackWork StoolSensible ® pages 68-71Ambition ® pages 72-75High-backWork ChairMid-backWork ChairHigh-backWork ChairInspire pages 76-97Four‐LegStack ChairSled BaseStack ChairFour‐LegTablet ArmStack ChairSled BaseTablet ArmChairWork Chair Work Stool Four‐Leg Stool10 | Seating & Tables – 3/2013

SeatingOverview of SeatingGSA Multi‐purpose Seating/Tables and AccessoriesSeating (Arm and armless versions available for most models.)Seek pages 98-101 Get Set ® pages 102-105 Tolleson Side Chairs pages 106-109Seating OverviewMulti‐purposeStacking andNesting ChairMulti‐PurposeChairSide Chair —KeystoneSide Chair —SquareSide Chair CartNimble ® pages 110-113High DensityStacking ChairChair CartSeating & Tables – 3/2013 allsteeloffice.com | 11

SeatingDefinitions and AcronymsANSI — (American National Standards Institute) ANSI is aprivate, non-profit organization (501(c)3) that administers andcoordinates the U.S. voluntary standardization and conformityassessment system.Asynchronous — High‐performance seating control systemwith three levers to modify adjustments on the chair for a morecustomized fit:• Angle of back relative to seat• Tilt (free float or infinite locking)• Forward tilt of seatASTM Standards — (American Society for Testing andMaterials) is an international standards group that developsand publishes technical standards for may products, materials,and services.BIFMA — (Business and Institutional Furniture Manufacturer’sAssociation) Produces voluntary standards for manufacturersof office furnishings. These standards are intended to providea common basis for the evaluation of safety, durability,dimensions, ergonomics, and the structural adequacy of thespecified furniture.CAL117 — Method used to test open flame resistance ofcomponents of upholstered furniture. This test is done with alighted cigarette placed in crevices of mock‐up components.CFC — (Chlorofluorocarbons) CFCs are broken down bystrong ultraviolet light in the stratosphere and release chlorineatoms that then deplete the ozone layer. CFCs are commonlyused as refrigerants, solvents, and foam blowing agents.Memory Foam — Viscoelastic foam developed by NASA thatretains the shape impressed upon it to reduce pressure pointsand distribute the load on the seat more evenly.NFPA261 — Method of test for determining resistance ofmock‐up upholstered furniture material assemblies to ignitionby a smoldering cigarette. This test is done with a lightedcigarette placed in crevices of mock‐up components.NFPA266 — Method of test for fire characteristics ofupholstered furniture exposed to flaming ignition source. Thisis a full-scale test of mock up. Equivalent to CAL133Pneumatic — Operated by compressed air in a tool ormachinePowder Coat — Dry paint electrostatically charged for betteradhesion to parts and baked on for a durable finish.Recyclable — Able to be reclaimed and re-used into anothervalue‐added product.Recycled — Made from post-industrial or post-consumerwaste products.Synchro-Tilt — A seating control where the chair back reclinesat a prescribed ratio in relation to seat angle. Allows user torecline while keeping seat cushion relatively level to the floor.Urethane — Synthetic plastic; any of a group of thermoplasticpolymers that are used in resins, coatings, insulation,adhesives, foams, and fibers.Seating OverviewCOL — (Customer’s Own Leather)COM — (Customers Own Material) See pages 246‐247.CTB133 — California Technical Bulletin (California Dept. ofConsumer Affairs Bureau of Home Furnishings and ThermalInsulation) Full-scale fire test for furniture manufactured foruse in public buildings. Industry standard for full burn test.Ergonomic — The coordination of the design of a productwith the capacities and requirements of the user.Weight‐activated — A seating control that has the reclinetension engineered into the chair so that the chair reclinetension will automatically vary depending on the weight of theuser reclining the chair.Wyzenbeck Testing — Method of testing the abrasionresistance of a fabric utilizing a cotton duck or wire mesh thatis rubbed, back and forth (a double rub), over the fabric.HFES — (Human Factors and Ergonomics Society) Amembership-based organization whose mission is to promotethe discovery and exchange of knowledge concerning thecharacteristics of human beings that are applicable to thedesign of systems and devices of all kinds.Knee Tilt — A seating control that pivots about a pointunderneath the knee (towards the front of the seat) to reducepressure on the back of the legs when reclining.Seating & Tables – 3/2013 allsteeloffice.com | 13

Seating #19 ®GSA Reference PageFurniture designer Marcus Koepke teamed with Allsteel to create a seating system that works integrally with the human body.Using a combination of passive adjustments, thermal regulation, and innovative materials, #19 delivers unsurpassed comfortand performance.#19AvatarThe weight-activated recline motion, Avatar ® [6-10] — balancesthe user perfectly using a natural pivot point at the hip.Avatar allows #19 to recline a full 22.5° as it gently lifts theback of the seat upward, creating a back-to-seat ratio of 4:1.This provides pelvic support, ensures proper alignment ofthe spine, and enhances circulation, preventing fatigue anddiscomfort. The recline motion of the chair enables the user tomaintain his or her line of sight. The linkages in Avatar alsoprovide balanced leverage for a wide range of users.#19 is the sum expression of18 integral parts, plus oneequally integral human being.1817169Tria ®#19’s Tria Calibrated Seat System [12] is designed toregulate body temperature. Tria is a proprietary, three-layer seatconstruction consisting of a unique base cushion, gel center,and microporous Tria Compliant Seat Upholstery [13], allsupported by the Seat Contour Panel [11].The gel is a self-contained, plasticizer-free impermeable layer ofmaterial that rests directly on top of channeled cushion foam.The gel provides adaptive pressure leveling when the user shiftsin the seat, reducing shear stress on the skin. It also forces airout of the cushion, creating a continuously circulating internalenvironment that releases excess heat and maintains optimaltemperature.PlexusThe Plexus ® Lumbar System [17] creates lower back supportby increasing the tension of the VenTech ® Thermal Weave [16]over a vertical range of 3 3 ⁄4".Plexus uses a sliding component to tense the fabric; adjustmentscan be made easily while the user is seated. The VenTechmaterial manages heat accumulation and loss and maintainsa temperature range slightly warmer than the environmentand just below core body temperature, ensuring an optimalenvironment for productivity. Because lower back support is theresult of fabric tension and not an added structural element, thebreathability of the VenTech material is not obstructed.The Flexible Back Carrier [18], which frames the VenTechweave, is a unique, non-rigid chair back designed to changeshape with pressure as the user moves and adjusts.1112515141 Multi-Surface Casters2 Aluminum Five-Star Base3 Pneumatic Height Adjustment4 Seat Depth Adjustment5 Tilt Limiting Lever6 Avatar Aluminum Chassis7 Avatar Aluminum Seat Structure8 Avatar Back Pivot Structure9 Avatar Vertical Aluminum BackSupports41367321010 Avatar Synchronizing Link11 Seat Contour Panel12 Tria Calibrated Seat System13 Tria Compliant Seat Upholstery14 Aluminum Arm Supports15 Adjustable Armrests16 VenTech Thermal Weave17 Plexus Lumbar System18 Flexible Back Carrier8114 | Seating & Tables – 3/2013

Seating #19 ®Controls#19 offers superior adjustability with minimal controls.Pneumatic Height Adjustment [3], Seat Depth Adjustment[4], and Tilt Limiting Lever [5] are shaped to indicate theirfunction and provide high-quality performance.The Pneumatic Height Adjustment, regulates the height of thechair relative to the floor. The height of the chair can be set tohelp the user obtain a neutral wrist position at the worksurfacewhile keeping his or her feet comfortably on the floor. The SeatDepth Adjustment adapts to different leg lengths with simpleback-to-front movement. The three‐position Tilt Limiting Leverallows an upright work position, a relaxed work position, andcan be disengaged for continuous, fully supported reclining.ArmrestsAluminum Arm Supports [14] and Adjustable Armrests [15]support the user’s arms in all recline positions and provide awide range of adjustability.Adjustable-height, pivoting arms can be set to multiple heights,widths, and angles. Height can be adjusted 4", from 8" to 12",and arms can pivot a full 60°, from 30° inward to 30° outward.GSA Reference PageSTANDARD FEATURES — #19:Overall Size:High-back Work ChairLumbar Support:PlexusArmrests:Adjustable armrests with solid aluminum supportsArmless models availableSeat Back:Flexible back carrier with VenTechSeat Cushion:Tria with self-contained gelErgonomic Motion:AvatarControls:Pneumatic height adjustmentSeat depthTilt limitCasters:Multi-surface casters for hard and soft surfaces#19Base and CastersAn Aluminum Five-Star Base [2] provides an excellentstrength-to-weight ratio and is composed of 100% recycledmaterial. #19’s Multi-Surface Casters [1] work on any floorsurface; their 80mm diameter size enhances mobility.Extendable Life#19 is designed to have an extendable life. Its frame and baseare made from 100% recycled aluminum; 88% of the materialsthat go into it are recyclable. As new features are developed,#19 can be easily upgraded, minimizing resource demands onthe environment. It is available in two powder-coat finishes,an essentially non-emitting process, critical for reducing indoorair pollutants in the manufacturing environment and in theworkplace.OPTIONS — #19:Pneumatic Cylinder:2 Standard Cylinder3 Short CylinderFrame Colors:P19 AlumaP80 Charblack MetallicP85 GraphitePR6 SilverUpholstery:See pages 256‐257 for Selections.See inside back cover for Colors and Codes.Take Back ProgramWhen #19 completes its useful life for a customer, Allsteel willtake it back for reuse or recycle as a part of our commitment tominimize the impact of our business on the environment.#19 Lifetime WarrantyThe entire chair, not just some of its parts, is backed by theAllsteel Lifetime Warranty.#19 meets the requirements set forth in ANSI/BIFMA X5.1‐2002 and BIFMA G1‐2002.#19 is warranted for multiple shifts and users up to 300 lbs.Seating & Tables – 3/2013 allsteeloffice.com | 15

Seating — Work #19 ®GSA SIN 711-18#19(See pages 114-117 for COM pricing on Grades J-Z)AdjustmentsModel NumberOverall Size and Frame Add options LeatherArmrest Features Finish below A B C D E F G H 1* 2*High-back Tilt Lock Aluma A19-HWA $ 2251 $ 2264 $ 2274 $ 2301 $ 2325 $ 2350 $ 2374 $ 2400 $ 3015 $ 4095Work Chair AvatarAdjustable Pneumatic Adj. Charblack Metallic A19-HWB $ 1861 $ 1874 $ 1884 $ 1911 $ 1935 $ 1960 $ 1984 $ 2010 $ 2625 $ 3705Arms Seat DepthGraphite A19-HWG $ 1861 $ 1874 $ 1884 $ 1911 $ 1935 $ 1960 $ 1984 $ 2010 $ 2625 $ 3705Silver A19-HWS $ 1861 $ 1874 $ 1884 $ 1911 $ 1935 $ 1960 $ 1984 $ 2010 $ 2625 $ 3705High-back Tilt Lock Aluma A19-HAA $ 2075 $ 2088 $ 2098 $ 2125 $ 2149 $ 2174 $ 2198 $ 2224 $ 2839 $ 3919Work Chair AvatarArmless Pneumatic Adj. Charblack Metallic A19-HAB $ 1684 $ 1697 $ 1707 $ 1734 $ 1758 $ 1783 $ 1807 $ 1833 $ 2448 $ 3528Seat DepthGraphite A19-HAG $ 1684 $ 1697 $ 1707 $ 1734 $ 1758 $ 1783 $ 1807 $ 1833 $ 2448 $ 3528Silver A19-HAS $ 1684 $ 1697 $ 1707 $ 1734 $ 1758 $ 1783 $ 1807 $ 1833 $ 2448 $ 3528*Allsteel Leather and Edelman Leather are available on #19. Please note that leather upholstery will reduce the thermodynamic properties of #19’s proprietary TriaCalibrated Seating System.How to specify —Select theModel Numberfrom above.Add FC to end ofmodel for CTB133 /Boston Fire Code /NY/NJ Port Authority($90 extra)1st Option:Select the Cylinder:2 Standard, allows 5"of travel3 Short, allows 4"of travel2nd Option:Select theFrame Color:A19-HWA or A19-HAAP19 AlumaA19-HWB or A19-HABP80 Charblack MetallicA19-HWG or A19-HAGP85 GraphiteA19-HWS or A19-HASPR6 Silver3rd Option:Select theSeat Upholstery:See pages 256-257for Selections.See inside back coverfor Colors and Codes.See pages 246-247 forCOM Guidelines.NOTE: VenTech chair back inblack only.A 1 9 – H . . P .Example: A19-HWA.2.P19.CTU1016 | Seating & Tables – 3/2013

Seating — Work #19 ®ModelNumberA19-HWAA19-HWBA19-HWGA19-HWS0.80.80.80.8COM Yardage7.07.07.07.0COL Sq. Feet40-45"40-45"40-45"40-45"Height (Range)Width26 1 ⁄2"26 1 ⁄2"26 1 ⁄2"26 1 ⁄2"OverallDepth27"27"27"27"Height (Range)17 3 ⁄8-22 3 ⁄8"15 1 ⁄4-19 1 ⁄4"17 3 ⁄8-22 3 ⁄8"15 1 ⁄4-19 1 ⁄4"17 3 ⁄8-22 3 ⁄8"15 1 ⁄4-19 1 ⁄4"17 3 ⁄8-22 3 ⁄8"15 1 ⁄4-19 1 ⁄4"Width22 1 ⁄4"22 1 ⁄4"22 1 ⁄4"22 1 ⁄4"Depth (Range)16 3 ⁄4-18 1 ⁄4"16 3 ⁄4-18 1 ⁄4"16 3 ⁄4-18 1 ⁄4"16 3 ⁄4-18 1 ⁄4"GSA SIN 711-18Seat Armrests BackrestPan Angle (Range)3° to 9.5°3° to 9.5°3° to 9.5°3° to 9.5°8-12"8-12"8-12"8-12"Height (Range)13 1 ⁄4-18 5 ⁄8"13 1 ⁄4-18 5 ⁄8"13 1 ⁄4-18 5 ⁄8"13 1 ⁄4-18 5 ⁄8"Width BetweenArmrests (Range)Depth (Range)12 3 ⁄8-13"12 3 ⁄8-13"12 3 ⁄8-13"12 3 ⁄8-13"Pivot InwardsPivot OutwardsHeight (Range)30°30°30°30°30°30°30°30°25"25"25"25"Width17 7 ⁄8"17 7 ⁄8"17 7 ⁄8"17 7 ⁄8"6 1 ⁄4-10"6 1 ⁄4-10"6 1 ⁄4-10"6 1 ⁄4-10"Lumbar Height(Range)Backrest/Seat Angle(Range)91°-113.5°91°-113.5°91°-113.5°91°-113.5°65.065.065.065.0Ship WeightShip WeightPer CartonCubes––––18.318.318.318.3#19A19-HAAA19-HABA19-HAGA19-HAS0.80.80.80.87.07.07.07.040-45"40-45"40-45"40-45"26 1 ⁄2"26 1 ⁄2"26 1 ⁄2"26 1 ⁄2"27"27"27"27"17 3 ⁄8-22 3 ⁄8"15 1 ⁄4-19 1 ⁄4"17 3 ⁄8-22 3 ⁄8"15 1 ⁄4-19 1 ⁄4"17 3 ⁄8-22 3 ⁄8"15 1 ⁄4-19 1 ⁄4"17 3 ⁄8-22 3 ⁄8"15 1 ⁄4-19 1 ⁄4"22 1 ⁄4"22 1 ⁄4"22 1 ⁄4"22 1 ⁄4"16 3 ⁄4-18 1 ⁄4"16 3 ⁄4-18 1 ⁄4"16 3 ⁄4-18 1 ⁄4"16 3 ⁄4-18 1 ⁄4"3° to 9.5°3° to 9.5°3° to 9.5°3° to 9.5°––––––––––––––––––––25"25"25"25"17 7 ⁄8"17 7 ⁄8"17 7 ⁄8"17 7 ⁄8"6 1 ⁄4-10"6 1 ⁄4-10"6 1 ⁄4-10"6 1 ⁄4-10"91°-113.5°91°-113.5°91°-113.5°91°-113.5°58.058.058.058.0––––18.318.318.318.3Dimensions are in accordance with BIFMA G1‐2002 guidelines — see illustration of guidelines on page 12.Seating & Tables – 3/2013 allsteeloffice.com | 17

AcuitySeating Acuity ®Acuity is a chair that enhances any environment, any body.Designed in collaboration with Bruce Fifield of Milan-basedDesign Continuum Italia, Acuity is designed with Italiansensibility and Allsteel ingenuity. Its design and ergonomicswork seamlessly while the controls are intuitive. Acuity iselegant and pleasing to the eye, as anything inessential has beenstripped away, leaving behind only a purity of form.Acuity has achieved SCS Indoor Advantage Gold Certification.Acuity is designed and manufactured to have minimal impact onboth the physical and social environment, made with no PVCcomponents and has a recycled content greater than 45%. Wewill take back, break down, recycle and/or reclaim the chairs atthe end of their useful life.GSA Reference PageIntuitive ControlsFine-tuning the fit is critical to optimizing ergonomics andimproving personal comfort. Acuity’s controls are well-marked,easy-to-find tabs, located along the sides of the seat so they’resimple to see, use, and understand. Now you’ll never have to getout of your seat or fuss with paddles and knobs to adjust yourchair.KEY FEATURESAcuFit Acuity provides ideal ergonomics, instantly. We used the latestanthropometric databases, high-tech modeling, and intenseobservation to understand just what a body needs. You’ll feel itthe minute you sit – snug support and contoured cushioning thatconforms to your body and stays with you throughout the day.No matter what size you are or how you work, Acuity adapts,automatically.Weight‐activated mechanismA ground-breaking, weight-activated mechanism built into thechair’s structure does two things critical to effective ergonomics:automatically adjusts recline tension in response to the user’sweight; and, keeps the seat and back moving smoothly togetherduring recline, thereby maintaining perfect balance, body angle,and focus.AWMHybrid seat cushionA unique combination of materials provides properties criticalto comfort. A molded foam base with additional memory foamoffers softness when you first sit along with greater support overtime. This translates into instant comfort, the elimination ofpressure points, and a healthy sitting experience over every hourof the day.Conforming mesh backForm creates function with a back designed to provide idealergonomics for bodies of every shape and size. The mesh carriermirrors the shape of the human spine, offering snug supportto the shoulders, lumbar area, and everywhere in between,simultaneously and continuously. In addition, the structure andmaterials of the yoke have inherent dynamic properties thatpromote healthy posture by allowing just the right amount offlex and body movement.AWL18 | Seating & Tables – 3/2013

Seating Acuity ®Materials and FinishesAcuity has been designed to complement any interior design,any organizational aesthetic. Purity of form, sensual lines, anda slender profile let it make a supportive statement to everyenvironment, every body. Choose from several classic colors forchassis, base, caster, mesh carrier, and mesh and a wide varietyof standard and partnership upholstery options.Optional Upholstered JacketDress for success with a slip on jacket that offers premiumappeal in conference areas, private offices, or the boardroom.Elegantly tailored with a simple snap closure and seven stitchesper inch, architects and interior designers can choose fromjackets in over 300 approved colors, including over 50 fromEdelman Leather, one of the world’s most respected tanners.Remove the jacket and you’re back to mesh for everydayflexibility, anywhere in the office.CastersBlack dual‐wheel hard tread casters for carpet are standard.Optional multi-surface casters provide smooth functioningon any surface, from a carpeted conference room to polishedconcrete. Finishes that match bases in standard black, graphite,or polished aluminum give Acuity head-to-toe elegance.Fully Adjustable ArmsIntuitive controls let you find any of the eight arm positions. Asingle lever releases the arms to slide up or down; a button rightwhere the thumb naturally lands lets you move the arm padinward or outward, forward or backward. You can also pivotthe front of the armpads inward to move in closer to your deskand offer support while working.Height Adjustable ArmsProvides height adjustment for optimal support of elbows andshoulders while keyboarding or conferencing.Fixed ArmsProvide basic support for people who face a varied workday. Fixed arms limit adjustability and maintain aesthetics inconference room settings. Acuity’s Fixed T Arms are 100% castaluminum.Materials• All upholstery foams are CFC-free.• All COMs/COLs must be approved for upholsterability orapplicable fire code compliance prior to order entry. See pages246-247 for COM ordering information.• Flammability code compliance of Allsteel textiles and seatingis listed on pages 256-257. COM/COL manufacturers supplycertificates of compliance for fabric-only tests such as CBT117. Allsteel must test a complete chair to supply a certificatewith CTB 133.Acuity meets the requirements set forth in ANSI/BIFMAX5.1‐2002. Acuity is warranted for multiple shifts and users upto 300 lbs.GSA Reference PageOPTIONS — ACUITY :Armrests:W Fully Adjustable ArmsH Height Adjustable ArmsF Fixed ArmsA ArmlessJacket:L LeatherF FabricM (None)Chassis:G Graphite ChassisS Silver ChassisP Polished Aluminum ChassisBack Frame/Mesh:GD Graphite Carrier/Dusk MeshGM Graphite Carrier/Mist MeshTM Titanium Carrier/Mist MeshTL Titanium Carrier/Lustre MeshFirecode:NO Standard Upholstery, No Fire CodeFC Firecode Option for CTB 133 / Boston Fire Code / NY/NJ Port Authority ($90 extra)Base:P71 Black Polymer BaseP85 Graphite Painted Aluminum Base ($116 extra)PR6 Silver Painted Aluminum Base ($116 extra)PAL Polished Aluminum Base ($173 extra)Pneumatic Cylinder:2 Standard; allows 5" of travel3 Short; non-standard 3 1 ⁄2" of travel to meet BIFMA G1‐2002Casters:H Black Dual‐Wheel Hard Tread for CarpetB Black Multi‐Surface ($88 extra)G Graphite Multi‐Surface ($88 extra)P Polished Aluminium Multi‐Surface ($116 extra)Upholstery:See pages 22-23 for Tria 2 models.See pages 256-257 for other upholstery selections.See inside back cover for Colors and Codesd Indicates upholstery available for Acuity JacketArmpads (upholstered option available on Leather models)S Standard Polyurethane ArmpadA Upholstered Armpad — Standard Leather ($84 extra)E Upholstered Armpad — Edelman Leather ($122 extra)NOTE: Not all options listed above are available on all models.See pages 20-21 and 22-23 for options by model.AcuitySeating & Tables – 3/2013 allsteeloffice.com | 19

Seating — Work/Conference Acuity ®• Features and Adjustments on all Acuity models: Conforming Mesh Back, AcuFit Tilt Lock withRecline Tension, Seat Depth, and Pneumatic AdjustmentGSA SIN 711-18(See pages 114-117 for COM pricing on Grades J-Z)Model NumberJacket Chassis Add options LeatherArmrest Material Finish below A B C D E F G H 1* 2*Fully Adjustable Leather Graphite AWLG — — — — — — — — $ 2305 $ 2745Arms Silver AWLS — — — — — — — — $ 2305 $ 2745Polished Aluminum AWLP — — — — — — — — $ 2624 $ 3064Fabric Graphite AWFG $ 1649 $ 1708 $ 1764 $ 1822 $ 1879 $ 1935 $ 1998 $ 2049 — —Silver AWFS $ 1649 $ 1708 $ 1764 $ 1822 $ 1879 $ 1935 $ 1998 $ 2049 — —Polished Aluminum AWFP $ 1968 $ 2027 $ 2083 $ 2141 $ 2198 $ 2254 $ 2317 $ 2368 — —Acuity(None) Graphite AWMG $ 1449 $ 1484 $ 1518 $ 1553 $ 1587 $ 1622 $ 1656 $ 1689 $ 1876 $ 2084Silver AWMS $ 1449 $ 1484 $ 1518 $ 1553 $ 1587 $ 1622 $ 1656 $ 1689 $ 1876 $ 2084Polished Aluminum AWMP $ 1768 $ 1803 $ 1837 $ 1872 $ 1906 $ 1941 $ 1975 $ 2008 $ 2195 $ 2403Fixed Arms Leather Graphite AFLG — — — — — — — — $ 2364 $ 2804Silver AFLS — — — — — — — — $ 2364 $ 2804Polished Aluminum AFLP — — — — — — — — $ 2683 $ 3123Fabric Graphite AFFG $ 1707 $ 1766 $ 1822 $ 1880 $ 1937 $ 1993 $ 2056 $ 2107 — —Silver AFFS $ 1707 $ 1766 $ 1822 $ 1880 $ 1937 $ 1993 $ 2056 $ 2107 — —Polished Aluminum AFFP $ 2026 $ 2085 $ 2141 $ 2199 $ 2256 $ 2312 $ 2375 $ 2426 — —(None) Graphite AFMG $ 1507 $ 1542 $ 1576 $ 1611 $ 1645 $ 1680 $ 1714 $ 1747 $ 1934 $ 2142Silver AFMS $ 1507 $ 1542 $ 1576 $ 1611 $ 1645 $ 1680 $ 1714 $ 1747 $ 1934 $ 2142Polished Aluminum AFMP $ 1826 $ 1861 $ 1895 $ 1930 $ 1964 $ 1999 $ 2033 $ 2066 $ 2253 $ 2461Armless Leather Graphite AALG — — — — — — — — $ 2191 $ 2631Silver AALS — — — — — — — — $ 2191 $ 2631Polished Aluminum AALP — — — — — — — — $ 2510 $ 2950Fabric Graphite AAFG $ 1535 $ 1594 $ 1650 $ 1708 $ 1765 $ 1821 $ 1884 $ 1935 — —Silver AAFS $ 1535 $ 1594 $ 1650 $ 1708 $ 1765 $ 1821 $ 1884 $ 1935 — —Polished Aluminum AAFP $ 1854 $ 1913 $ 1969 $ 2027 $ 2084 $ 2140 $ 2203 $ 2254 — —(None) Graphite AAMG $ 1335 $ 1370 $ 1404 $ 1439 $ 1473 $ 1508 $ 1542 $ 1575 $ 1762 $ 1970Silver AAMS $ 1335 $ 1370 $ 1404 $ 1439 $ 1473 $ 1508 $ 1542 $ 1575 $ 1762 $ 1970Polished Aluminum AAMP $ 1654 $ 1689 $ 1723 $ 1758 $ 1792 $ 1827 $ 1861 $ 1894 $ 2081 $ 2289Continued on next page hHow to specify —Select theModel Numberfrom above.1st Option:Select theFrame/Mesh Color:GD Graphite/Dusk MeshGM Graphite/Mist MeshTM Titanium/Mist MeshTL Titanium/Lustre Mesh2nd Option:Select theFire Code:Add either NO for no;or FC for CTB133 /Boston Fire Code /NY/NJ Port Authority($90 extra)3rd Option:Select theBase Color:P71 Black PolymerP85 Graphite Painted Aluminum ($116 extra)PR6 Silver Painted Aluminum ($116 extra)PAL Polished Aluminum ($173 extra)A..Examples: AWFPGMNO.PAL.2.B.BRS01 AFMPTLFC.P85.3.G.DCW0220 | Seating & Tables – 3/2013

Seating — Work/Conference Acuity ®ModelNumberAWLGAWLSAWLP11.211.211.2—COM Yardage——COL Sq. Feet SeatCOL Sq. Feet BackCOL Sq. Feet Arms141414444Height (Range)41-46 1 ⁄2"41-46 1 ⁄2"41-46 1 ⁄2"Width26 1 ⁄8"26 1 ⁄8"26 1 ⁄8"DepthHeight Standard (Range)Short (Range) 15-18 1 ⁄2"WidthOverall25"25"25"16 3 ⁄4-21 3 ⁄4"16 3 ⁄4-21 3 ⁄4"16 3 ⁄4-21 3 ⁄4"19"19"19"Depth (Range)15 1 ⁄2-18 1 ⁄2"15 1 ⁄2-18 1 ⁄2"15 1 ⁄2-18 1 ⁄2"GSA SIN 711-18Seat Armrests BackrestPan Angle (Range)2.5°-9.5°2.5°-9.5°2.5°-9.5°7-11"7-11"7-11"Height Standard (Range)12 1 ⁄2-20 1 ⁄2"12 1 ⁄2-20 1 ⁄2"12 1 ⁄2-20 1 ⁄2"Width BetweenArmrests (Range)Depth (Range)8 1 ⁄4-13 1 ⁄4"8 1 ⁄4-13 1 ⁄4"8 1 ⁄4-13 1 ⁄4"25°25°25°Pivot Inwards—Pivot Outwards——Height25 1 ⁄2"25 1 ⁄2"25 1 ⁄2"Width16"16"16"8 3 ⁄4"8 3 ⁄4"8 3 ⁄4"Lumbar Height(Initial)Backrest/Seat Angle(Range)93.5°-111°93.5°-111°93.5°-111°64.064.064.0Ship WeightCubes21.721.721.7AWFGAWFSAWFPAWMGAWMSAWMP2.02.02.01.01.01.0———11.211.211.2—————————44441-46 1 ⁄2"41-46 1 ⁄2"41-46 1 ⁄2"41-46 1 ⁄2"41-46 1 ⁄2"41-46 1 ⁄2"26 1 ⁄8"26 1 ⁄8"26 1 ⁄8"26 1 ⁄8"26 1 ⁄8"26 1 ⁄8"25"25"25"25"25"25"16 3 ⁄4-21 3 ⁄4"16 3 ⁄4-21 3 ⁄4"16 3 ⁄4-21 3 ⁄4"16 3 ⁄4-21 3 ⁄4"16 3 ⁄4-21 3 ⁄4"16 3 ⁄4-21 3 ⁄4"19"19"19"19"19"19"15 1 ⁄2-18 1 ⁄2"15 1 ⁄2-18 1 ⁄2"15 1 ⁄2-18 1 ⁄2"15 1 ⁄2-18 1 ⁄2"15 1 ⁄2-18 1 ⁄2"15 1 ⁄2-18 1 ⁄2"2.5°-9.5°2.5°-9.5°2.5°-9.5°2.5°-9.5°2.5°-9.5°2.5°-9.5°7-11"7-11"7-11"7-11"7-11"7-11"12 1 ⁄2-20 1 ⁄2"12 1 ⁄2-20 1 ⁄2"12 1 ⁄2-20 1 ⁄2"12 1 ⁄2-20 1 ⁄2"12 1 ⁄2-20 1 ⁄2"12 1 ⁄2-20 1 ⁄2"8 1 ⁄4-13 1 ⁄4"8 1 ⁄4-13 1 ⁄4"8 1 ⁄4-13 1 ⁄4"8 1 ⁄4-13 1 ⁄4"8 1 ⁄4-13 1 ⁄4"8 1 ⁄4-13 1 ⁄4"25°25°25°25°25°25°——————25 1 ⁄2"25 1 ⁄2"25 1 ⁄2"25 1 ⁄2"25 1 ⁄2"25 1 ⁄2"16"16"16"16"16"16"8 3 ⁄4"8 3 ⁄4"8 3 ⁄4"8 3 ⁄4"8 3 ⁄4"8 3 ⁄4"93.5°-111°93.5°-111°93.5°-111°93.5°-111°93.5°-111°93.5°-111°64.064.064.064.064.064.021.721.721.721.721.721.7AcuityAFLGAFLSAFLP———11.211.211.214141444441-46 1 ⁄2"41-46 1 ⁄2"41-46 1 ⁄2"26 1 ⁄8"26 1 ⁄8"26 1 ⁄8"25"25"25"16 3 ⁄4-21 3 ⁄4"16 3 ⁄4-21 3 ⁄4"16 3 ⁄4-21 3 ⁄4"19"19"19"15 1 ⁄2-18 1 ⁄2"15 1 ⁄2-18 1 ⁄2"15 1 ⁄2-18 1 ⁄2"2.5°-9.5°2.5°-9.5°2.5°-9.5°9"9"9"19 3 ⁄4"19 3 ⁄4"1

gsa rotary table pricelist

You Might Also Be Interested In