hofmann rotary table price

Manual precision rotary table with compact and space saving design. The high rigidity allows the use for machine tools as well as for measuring applications.

Additional direct indexing plate for the indexing plate device for all divisions up to 100 and higher ones, many up to 400, with included adjusting table.

This control unit can be connected to any make or model of machine control and is started via M signal command. Programmable directly in either direction to any specified angle directly. The unit can be mounted vertically or horizontally at will. Motor is mounted to the left side on this device, through hole capability is closed due to the style and application of the device. Hofmann products are a high quality unit, this is no different being pre-owned is incredible value for money and come with a 1 year warranty. General dimensions are attached to this listing, however for clarity in vertical, the centre height is 160mm, the overall height is 250mm, in the horizontal plane, the height is 160mm. Carrying capacity vertically unsupported 120kg or 250kg with matching tailstock. Horizontal ;plane carrying capacity Is a very impressive 600kg. Net weight 60kg (Table and motor) This is a one only offer and cannot be repeated and is therefore subject to prior sale – contact technical sales for further information. The model number relates directly to the spindle and height, there is no faceplate with this unit.

The HRT160-2 has two rotary spindles to allow two workpieces to be loaded. This reduces the number of tool changes and the number of times the machine stops to load parts. Requires a Haas mill with...

This is a high precision rotary table/air bearing spindle made by Professional Instruments Company, Block-Head model 10R-15. It was pulled from a state of the art Moore Tool M18 AG Diamond Tool La...

I have the 8” with plates. Don’t use the plates often but easy to fit, otherwise they normally they get in the way but ok when used. I would have liked it to work in vertical mode, but I have a good vertex dividing head so no problem here. it’s certainly is a brilliant bit of kit. The thrust bearing under the table is huge. It’s smooth and accurate. Best bit of kit I have. Same t slots as a myford, but parallel 20 mm bore centre. So no mounting stubby morse tapers but I now have a range of dedicated centres..

Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing attachment, dividing head, rotary indexing table rotary coupling