meca rotary table factory

The 3 retaining screw holes are for adding your own lacating centers or a Meca morse taper center, I think from memory they come from morse 2 up to morse 4. You just bolt it in and you con drop anything with a morse taper into it.

... OptionsThe turntable machine R 703 is also available as an Atex version. 4-6-8-12 or 24 spindles are available as options; half of the selected spindles can be equipped with a directional rotation reverse function. The ...

The Heavy-Duty Manual Turntable maximizes workspace and minimizes wasteful motion. Bench top turntables allow workers to stay in one position and rotate items for access from all sides. ...

... impacts or forces while gear type or torque motor type rotary tables are not likely do. Its accuracy and rigidity obtained by zero-backlash technique that achieves high accurate positioning with the rotational ...

... acoustics Remote-operated Turntable HRT I is used for automated orientation-dependent acoustic measurements, allowing to rotate the device under test to specific angles in the measurement field.

The cumulative rotary table is an auxiliary device for the accumulation of packs before group packaging or other tasks. The storage disk made of stainless material, which allows the use of the table ...

This is the Hollow Rotary Table model number GSN60-05K-SV with table size 60mm gear ratio 1:5 for servo motor. GIGAGER Hollow Rotary Table also called ...

... Aerosol or Bag on Valve Stations. Our 36″ Rotary Index can accept a maximum of 6 stations, our 18″ Rotary Index can accept a maximum of 4 stations, and our 9″ Rotary Index can accept ...

... 40 inch diameter Rotary Bottle Loading Turntables are manufactured in 1/8″, 304 stainless steel. Power is provided for the TAU-4000 by a DC gear motor. Variable speed up to 150 containers per minute.

Fully Factory Rebuilt, Factory Refurbished Rotary Tables, to as new factory specifications: Horizontal, Weight approx 2100kg, Loading capacity approx 18,000kg/39,600lbs, .  Refurbished October 2017 by Rusach International.  Fanuc Alpha 30 motor, Heidenhain ROD800C +/-3.5 Arc Second encoder, Siemens hydraulic pump.  Table Top is set up for a pallet receiver.  Need it modified, please let us know!

Many rotary table manufacturers outsource gear fabrication to lower costs. While that strategy may offer short term cost savings, Index Design’s American made rotary tables are built with gears cut in house. This is the only way to closely monitor and control tolerances, consistency and performance.

Our rotary tables incorporate large diameter high tensile bronze worm gears mated against hardened steel drive shafts. The combination of metal gives superior wear properties for long lasting operation. As the rotary table is run, the properties of a tin bronze gear develops a low friction deposit on the mating steel drive shaft. These deposits fill in microscopic pores of the mating surface. Over time, as these deposits are embedded on the surface, wear decreases followed by a reduction in frictional forces within the gear assembly.

In addition, the data gathered from our automated calibration procedure allow our engineers to assess, monitor and improve the static and dynamic performance of prototype rotary tables during the design phase.

Our engineers have a long and rich history in the machine tool business, they combine decades of both CNC machine tool and rotary table manufacturing experience with the latest design tools to produce rotary tables with superior performance and dependability.

Our CAD/CAM software is used to analyze displacement and stress for each component, sub-assembly and total assembly. However, the best software and technology is worth next to nothing if no one understands the craftsmanship. This is particularly true when manufacturing precision rotary tables which involves many steps. Despite all the modernization and automation available, a large part of the manufacturing process is still completed by hand. At Index Designs, we understand and appreciate craftsmanship, It is designed and built into our products.

Our product range includes single and multiple axes, tilt/rotating tables, and indexing and high-speed spindles. Additionally, we offer customized solution tables for customer requests or OEM projects.

Even for EDM machines that have been in use for decades, we will work with you to determine the ideal rotary indexing table and/or rotating/indexing spindle solution.

Our state-of-the-art rotary indexing tables and customizable reference and clamping systems provide endless application possibilities and highly efficient solutions.