tsudakoma rotary table manual price

The latest TN tilting range from Tsudakoma, with major developments over earlier models with major increases in speed and power transmission, with high power pneumatic clamping system. The unit has a 55mm spindle nose location with a generous location depth of 15mm with 35mm directly through the table and a has a centre height of 150mm in the vertical position (90 degrees) and 210mm in the horizontal position (0 degrees) without faceplate, 235mm with faceplate. This device is around 524mm in overall width which would ideally suit a wide range of machine tool bed widths and an overall height of 235mm. The unit has a tilting range as standard of -17 to + 107 degrees. An excellent carrying capacity of 20kg through the whole tilting range and 35kg horizontally or between centres and speeds of up to 41. 6rpm in the rotary axis and 16. 6rpm in tilt dependent on motor selection. Net weight of this device is 80kg. The Tsudakoma TN-131 CNC rotary tilting table without motors, can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th ;axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted). Rotary axis motor is mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances, the tilt axis motor is mounted in a rear facing direction on the far side of the device and should not have any bearing on traverses. This range of Tsudakoma devices now come with dual lead full depth worm and wheel, which means that there is less load on individual teeth improving wear and torque performance over and above the conventional standard gear. Tsudakoma is one of the oldest and original manufacturers from Japan and in our experience build a very fine device with a very long service life, probably greater than those we have experienced from other Japanese makers. Tsudakoma products carry a standard one year parts and labour warranty and have a full working partnership with CNCROTARY. COM. This device may take from 2 to 3 weeks to configure as required.

Tsudakoma has been providing best-in-class rotary tables for over 100 years, offering multiple models and configurations to ensure seamless integration with your machining centers. Koma Precision has been distributing Tsudakoma’s tables for over 40 of those years and our North American sales team and in-house engineers will work with you to determine which model best suits your machining needs.

Tsudakoma"s RTT-111,CA, distributed through KOMA Precision Inc., is a high speed, drop trunnion, tilting rotary table that is engineered with workholding flexibility in mind. The RTT-111,CA is now equipped to utilize even more commercial systems including system 3R and Erowa chuck and pallet systems; as well as Northfield"s 5C collet closer, 2 Jaw and 3 Jaw chucks and Hirschmann"s chuck and pallet system. The RTT-111,CA can also be equipped to include a standard faceplate. All options are available for purchase from KOMA Precision. For five axis machining, the RTT-111,CA with its pallet system allows for unprecedented access (five sides) to the part. Parts that are held with vises, chucks, and clamps limit the accessibility (up to four sides), thus decreasing the efficiency of the process. Because the RTT-111,CA rotates on center, shorter tools and less spindle travel is required. The uniqueness of the pallet system also creates a lower profile than parts that are held with conventional workholding, thus increasing rigidity. The features offered on the RTT-111,CA are ideal for those looking to improve the flexibility and productivity of their operation without compromising rigidity and accuracy. Like all Tsudakoma rotary tables, inside the RTT-111,CA is a proprietary dual lead worm gear system with ultra precision cross roller bearings.

Workholding device that affixes to a mill, lathe or drill-press spindle. It holds a tool or workpiece by one end, allowing it to be rotated. May also be fitted to the machine table to hold a workpiece. Two or more adjustable jaws actually hold the tool or part. May be actuated manually, pneumatically, hydraulically or electrically. See collet.

KOMA Precision Inc. introduces a line of high accuracy, high rigidity, energy saving and zero maintenance rotary tables from Tsudakoma. The pictured RBS series (Rotary Ball System) is a 4th axis rotary table series suitable for single-axis VMCs and the TBS series (Tilt Ball System) is a 5th axis Read More

Tsudakoma has developed the new RDS series direct-drive rotary tables. This series utilizes Tsudakoma’s proprietary direct-drive motor system, enabling the rotary table to achieve high speed and acceleration with no backlash.