two axis rotary table factory

Our rotary indexing tables can be used on all EDM, laser, and HSC machines and are completely sealed (IP68) from dielectric fluid (water, oil). The final product details are determined in a consultation with you and/or the machine manufacturer and optimized to your requirements, (with or without clamper, electrical design, etc.). For most new machines, rotary indexing tables are controlled and programmed by the machine control system (A-axis). Older equipment often needs an additional control system for use with the rotary indexing table. Please verify all technical requests in advance with our sales staff or our technical department.

Used in newer machines the rotary indexing table mostly can be controlled and programmed by machine control system (A-axis). For older machines an additional control system is necessary to operate the rotary indexing table. Please clarify all technical requirements in advance with our sales team and our technical department.

Eight-spindle rotary dividing table with a faceplate with a diameter of 36 mm. In use, a workpiece with a maximum weight of 1 kg per spindle can be machined.

The TRT70 dual-axis rotary table from Haas Automation delivers high-speed and accurate positioning for 3+2 and full 5-axis machining of small, complex parts – like those found in the medical, dental, and jewelry industries. The unit’s ultracompact size and light weight reportedly make the TRT70 the perfect dual-axis solution for even the smallest machining center.

The TRT70 uses powerful brushless servomotors to provide 60 ft-lb (81.3 Nm) of torque on the tilt axis and 40 ft-lb (54.2 Nm) on the rotary axis; indexing speeds of 410 deg/sec on the tilt axis and 620 deg/sec on the rotary axis ensure short cycle times. The unit provides ±120 degrees of tilt and 360 degrees of rotation to position parts to almost any angle for machining. The precision-ground 70 mm (2.76") platter features multiple bolt patterns and a precision through-bore for versatile fixturing, and will swing parts up to 4.0" (102 mm) diameter. The maximum platter capacity is 3 lb (1.4 kg).

At just 18.5" (470 mm) wide and 10" (254 mm) deep, the TRT70 easily fits into even the smallest machining center, or can be mounted on one end of a larger machine’s table, freeing up the remainder for additional fixtures or vises. It is the perfect complement for Haas Automation’s new CM-1 Compact Mill or existing OM-Series Office Mills. Like all Haas rotary tables, the TRT70 can easily be removed when not needed.

Rusach International & Innovative Rotary Table Solutions are a leading worldwide supplier of small to medium sized compact CNC rotary tables, standard and application oriented designs, high accuracy, compact rotary tables.  Thru bore rotary tables, horizontal rotary tables, vertical rotary tables, combination/convertible H-V rotary tables, multi spindle rotary tables, 2-axis tilting rotary tables, direct drive rigid and flexible rotary tables.  Production style rotary tables to fit any machine.

Innovative Rotary Table Solutions has a full line of accessories like tail stocks, magnetic plates, rotary supports, steady rests, rotating tail stock supports and controllers, all designed to fit your application.  Contact Rusach International today with your application.

The TRT70 dual-axis rotary table from Haas Automation, Inc. (Oxnard, CA) delivers high speed and accurate positioning for 3+2 and full 5-axis machining of small, complex medical parts. The unit’s ultra-compact size and light weight make the TRT70 the perfect dual-axis solution for even the smallest machining center. The TRT70 uses powerful brushless servomotors to provide 60 ft-lb (81.3 Nm) of torque on the tilt axis and 40 ft-lb (54.2 Nm) on the rotary axis; indexing speeds of 410 deg/sec on the tilt axis and 620 deg/sec on the rotary axis ensure short cycle times. The unit provides ±120 deg of tilt and 360 deg of rotation to position parts to almost any angle for machining. The precision-ground 70 mm (2.76 in) platter features multiple bolt patterns and a precision through-bore for versatile fixturing. It will swing parts up to 4.0 in (102 mm) diameter. The maximum platter capacity is 3 lb (1.4 kg).

At just 18.5 in (470 mm) wide and 10 in (254 mm) deep, the TRT70 easily fits into even the smallest machining center or can be mounted on one end of a larger machine’s table, freeing up the remainder for additional fixtures or vises. It is the perfect complement for the new CM-1 Compact Mill or existing OM-Series Office Mills. The TRT70 can easily be removed when not needed. It is built in the U.S. and is backed by a worldwide network of Haas Factory Outlets for support and service.

Kitagawa"s new GT200 rotary table is a through hole unit capable of withstanding high cutting loads. It features a 200mm diameter table and provides ...

The TRT70 is a dual-axis tilting rotary table that offers high-speed, accurate performance for 3+2 and full 5-axis machining of small parts. It fits into the CM-1 or ...

100 mm (3.9") High-Speed Tilting 2-Axis Rotary Table, with indexing up to 1000 deg/sec. Requires a Haas mill with 4th- and 5th-axis drives for true 4th- and 5th-axis ...

The TR500SS is a high-speed, dual-axis trunnion rotary table that offers maximum rigidity and accurate performance for 3+2 and full 5-axis machining of large parts.

... X-RSW-E Series products are motorized rotary stages with built-in controllers. Rated for 2.25 N-m of torque, speed up to 75 rpm, and a load capacity of up to 20 kg, these stages ...

... , photonic component alignment, high-accuracy laser machining and precision wafer inspection. These rotary stages can also be configured as multi-axis gimbals.

... Tilt-Yaw (A/B) two-axis rotary assembly provides high-speed machining capabilities for complex 3D part geometries. The precision-aligned system allows accurate positioning on a hemispherical ...

... ) MDR two-axis rotary assembly provides high-speed machining capabilities for complex 3D part geometries. The precision-aligned system allows accurate positioning on a hemispherical surface. ...

This is the smallest CNC Rotary Table manufactured by Nikken Kosaksuho in Osaka, Japan. With pneumatic clamping this rotary table is used by many on their small vertical ...

... secured. High positioning accuracy ensures precise results for 5-axis machining. KESSLER`s very latest torque motor generation, the ultra-flexible rotary and rotary tilt tables ...

... Drive Rotary Table is a kind of rotary table used to the continuous operation which is several times more agile and accurate than conventional face gear or rack and pinion ...

Rotary tables bring movement into modern production. This applies all the more when they drive up plant productivity in combined form as NC multi-axis combinations. In addition to power, dynamics and precision, the tried-and-trusted FIBRO features of endurance and reliability in particular play a decisive role.

FIBRO standard multi-axis combinations have a modular design based on the extensive FIBRO range of construction components. The swivel axes are driven by FIBROPLAN rotary tables of different sizes powered by worm drives. Both FIBROPLAN rotary tables and, to optimise speed and acceleration, direct-drive FIBRODYN rotary tables are used for the finishing axis. The number of rotary tables on the finishing axis varies.

In addition to the standard models, FIBRO rotary tables in all series and models can be used for multi-axis combinations. When it comes to realising customised solutions, the special expertise of FIBRO engineers is as much in demand as the exceptional depth of production of the rotary table specialists. Numerous projects in a wide range of sectors around the globe demonstrate how significantly users are profiting from the high level of solutions expertise and the worldwide service network at FIBRO.

Available in range of frame sizes, High Speed Rotary Tables provide 4th and 5th axis machining capability with precision, yet are fitted with fast acting clamping system, making them suited for high-speed, heavy-duty static machining operations with rapid piece part positioning. Using in-built direct drive motor, BRC-TT version rotates bi-directionally at variable speeds up to 120 rpm. Both axes are equipped with sealed encoder mounted directly to axle of tables, eliminating backlash.

As machine tools have become progressively more agile and powerful, and cutting tools more capable, the need for high speed rotary tables to help reach the full potential of new equipment is more vital today than ever before.

Available in a range of standard frame sizes and all with a tilt range of up to  120 degrees. They provide rapid, highly efficient 4th and 5th axis machining capability with ultra precision, yet are fitted with a powerful and fast acting clamping system, making them equally suited for high speed, heavy duty static machining operations with rapid piece part positioning.

The BRC-TT version uses our unique and compact "in-built" direct drive motor to rotate bi-directionally at instantly variable speeds up to 120 rpm. A drive system that not only provides far greater acceleration and braking than conventional 2-axis tables, but at the same time takes up much less space in the machine work zone and drastically reduces costly maintenance.

Both axis are equipped with a high accuracy, sealed encoder mounted directly to the axle of the tables, eliminating backlash and reducing positioning error to a new lower level. For ease of set-up and rapid change-over, all tables are prepared with a precision center "pilot" bore for absolute fixture location, as well as combination "T" and alignment slots for fixture orientation and mounting, plus a through hole for a media supply when needed.

LCM tables are ideal for OEM, rebuilding, retrofitting or aftermarket installations as the "BRC" series can be interfaced with most modern CNC controllers.

* pL SOLUTIONS Shanghai Co. Ltd is part of a network of locally owned, independent representatives and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS India/SEAis part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS Italia is part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS Japan is part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS USAis part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS India/SEA is part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS USA is part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS India/SEAis part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS South Korea is part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS India/SEA is part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS USAis part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

* pL SOLUTIONS India/SEAis part of a network of locally owned, independent distributors and service specialists dedicated exclusively to the sales, service, and support of CNC rotary tables designed and manufactured by the Swiss firm Peter Lehmann AG (pL)

For complex, repetitive measuring tasks, QC 2000 users can automatically record measuring programs to run at any time. This digital readout tracks presets, measurement sequence, tolerances, and data-output commands. When the recorded measuring program is repeated, the QC 2000 displays visual instructions for the features to be probed, giving direct, repeatable guidance.

The same Stallion Trunnion Table, up to eight times the productivity. ​Built for the highest production jobs. Available in 3 to 8 sided configurations.​ Complete solutions available to maximize your VMCs throughput.​​ Also made for any rotary table and machine tool on the market.