earthquake gas safety valve pricelist

Please take a moment to understand the simplicity of our valves’ operation. It has been our experience, that the simpler the operation, the more accurate the function is when needed. Each valve is tested and certified before leaving our factory ensuring it meets Los Angeles Counties’ strict approvals.

Like most states, Washington has guidelines designed to help reduce the risk of fire from open gas lines. These regulations include the types of safety features and equipment that can be incorporated into gas fuel lines. The most common device that home and business owners can install to protect their property is earthquake shut-off valves – also called seismic valves.

More than 1,000 earthquakes occur in Washington annually, most in the west of the Cascades. While only a handful makes the headlines, all of these events have the potential to risk lives and damage property. Earthquakes can have both immediate and long-lasting effects. Hence, installing an automatic gas shutoff valve that shuts off the flow of natural gas to a home in the event of an earthquake or line rupture is the best possible safety precaution for the homeowners.

There are two types of Earthquake Gas Shut off Valves installed: seismic (or earthquake-actuated) valves and excess flow valves. These available Earthquake valves can manually or automatically shut off the flow of regulated gas to a home through meters or pipes that can be damaged due to an earthquake or other heavy tremors. This is accomplished either by motion sensing, which response to tremors caused by earthquakes, or a type of valve that senses a gas flow that is higher than normal and seals off the flow completely. These earthquake valves can be installed in lines that carry either natural gas or liquefied petroleum gas (LPG). The type of valve installed will be subject to an inspection (i.e., what will be the better fit).

If you smell gas after an earthquake, gas supply companies instruct homeowners and operations engineers in commercial buildings to shut off their gas supply immediately. Escaping gas has the potential to cause even more problems than an earthquake itself, either through fire or severe damage to your gas system. This is why the gas needs to be shut off as soon as possible when a quake has occurred. However, sometimes that isn’t feasible and other times no one is around to smell escaping gas. That’s when your unattended earthquake valve goes into action and instantly cuts off the gas to protect your property.

Seismic Gas Shutoff valves (also known as earthquake valves) can automatically shut off the flow of gas from the meter to the house. It works when the earthquake movement reaches 5.4 or more higher scale according to its in-built meter.

It"s obvious that Seismic Gas Shutoff valves need to be installed properly with the correct settings. An incorrect installation and activation of a seismic valve result in potential damage to the gas lines themselves – and to your property – they can result in life-threatening accidents.

The installation of an earthquake valve is a complicated project and is also a difficult thing to test once the job has been completed. If it becomes a DIY project, there’s no guarantee that the valve will actually work in the event of an earthquake.

An earthquake valve must be installed on equipment owned by your gas utility company, and the technicians you hire must have good working relationships with utility technicians and government engineers. They must also be savvy regarding permits and the condition of geological terrain.

That is why you want to call Fischer Heating and Air Conditioningwhen you decide to protect your property with seismic valves. We have a solid reputation for safe and successful installations of earthquake valves under many different conditions and guarantee our work.

After any natural disaster like an earthquake, an earthquake, or other significant event causes your earthquake to shut off or the excess-flow (EVF) valve gets close. To reset it back to work you can use the manufacturer"s resetting manual guide. If you"ll find it difficult to reset the valve then our recommendation is to call a certified professional from Fischer Plumbing to do the reset and adjust the valve settings and to perform safety checks to measure the gas flow and re-lit the pilot light.

Price: The cost of the earthquake valve will vary on the type, size, as well as installation requirements & earthquake gas shut-off valve installation cost charges of different companies.

Choosing A Perfect Valve: Before finalizing the valve size and manufacturer, you need to consult with the local department building and safety department to find out their initial requirement for the earthquake valve.

Where to Purchase A Valve:After finalizing the valve, to buy it, you can contact trusted plumbers around your area or go to the local certified supplier.

Installing A Valve through Contractor: Installing an earthquake valve or excess flow valve (EFV) is not an easy job hence it is required to hire a professional and certified contractor who is well experienced and can set it properly on your house line.

If you wish to install an Earthquake Valve or EFV, Fischer Plumbing can help you instantly. We will coordinate with you and will fulfill your requirement from choosing the valve to installing it properly on your house line. In some cases, the natural gas service line can gap intersperse to install the EFV.

Fires associated with broken gas and electrical lines are a frequent result of moderate to major earthquakes. Water supply line damage is also likely in these situations and fire departments are obligated to first serve public facilities in the event of disaster. It is estimated that over 90% of damage sustained during the 1906 San Francisco earthquake was due to inextinguishable gas line fires.

Team up with Safety Valve Installation Inc. and invest in the cost-effective solution to earthquake protection - a seismically activated gas shut-off valve. Our installed valves are rated for 30 years of uninterrupted use - an average cost of less than $2 per month over rated valve life.

SVI is an industry leading Safety valve installer.Safety Valve Installation Inc puts safety first. We use the proper equipment and tools to make sure the job gets done right.

We use quality fittings and parts, check existing gas meter for damage, protect fittings against rust, reset pilot lights and clear away all work related debris.

What They Think About Us“I highly recommend an auto gas safety shutoff valve installed by Safety Valve Installation Inc. to help protect your home from the risk of fire resulting from an earthquake.”

“A couple years ago we had Safety Valve Installation Inc install an automatic natural gas shutoff device in my home.  We have always regarded this as one of the best home improvement investments we could have made.  The knowledge that in the event of an earthquake our house will be protected from the possibility of a gas leak and subsequent fire has given us immense peace of mind.  Living in an earthquake prone region, this extra measure of safety can make all the difference in the world.  We would not hesitate for one minute to recommend the installation of this safety valve by Safety Valve Installation Inc to all homeowners.”

Mark and Sue S., Paso Robles, CA“We hired Safety Valve Installation Inc to install a seismic gas shut off valve.  The installation was quick and easy.  We have taken every precaution we can to protect our home from fire caused by leaking gas lines in the event of an earthquake.”

“California living does come with a few drawbacks, one of which is the dreaded earthquake.  So, when Safety Valve Installation Inc told us about the automatic gas shut-off valve, it seemed like a great idea to have it installed on our home.  The installation was prompt, and the technicians were happy to explain how it worked and how to re-set it.  The very reasonable cost more than compensates not only for the safety it provides us, but also for the protection of our home in the event of a major and or not so major earthquake.  The sense of security it gives us is immeasurable and we can’t thank them enough.”

Bianca S., Templeton, CASafety Valve Installation Inc installed one of these clever devices on my home several years ago.  Since then I have recommended it to all my clients.  As a Real Estate Broker I want to help my clients protect their biggest investment.  Even if I am away from home it gives me peace of mind knowing that if an earthquake were to occur, my home will be protected.”

As good as it gets service, installation and professionalism. The real test is when we have an earthquake! We were pleased with installer finding an existing gas leak in our meter which he repaired along with the installation. He also did touch-up paint on meter, leaving it looking clean and new. Having the safety valve in place makes us feel like we"ve got much less to worry about in case of an emergency.

Home: TestimonialsTHE SUGGESTION IN ILLUSTRATIONS INCLUDED ON OUR WEBSITE ARE INTENDED TO IMPROVE EARTHQUAKE AWARENESS AND PREPAREDNESS; HOWEVER, THEY DO NOT GUARANTEE THE SAFETY OF AN INDIVIDUAL OR A STRUCTURE. PLEASE FOLLOW EARTHQUAKE GUIDELINES AVAILABLE FROM THE FOLLOWING WEBSITES:

Seismic Shutoff installs residential, commercial and industrial seismic gas shutoff valves (SGSV) in Washington Oregon and California. Earthquake Valves are designed to stop the flow of natural gas when earthquake activity strikes. Call for a quote.

Clients can avail from us, a wide range of LPG Solenoid Valve at leading industry prices. Manufactured using optimum quality raw material, procured from reliable vendors of the industry, these products are widely appreciated for their durability, reliability and efficient performance. Furthermore, we make sure to examine the quality of the entire range before delivering these products to the clients end, in order to serve them in the best possible manner.

Prominent & Leading Service Provider from New Delhi, we offer Lpg Lot Adaptor Brass, Seismic Gas Shutoff Valve, Excess Flow Check Valve ( EFCV), LPG Gas Filter, Needle Control Valve and Slam Shut off Valve.

An earthquake valve (or seismic valve) is an automatic method to shut off the low pressure regulated gas supply to a structure during a major earthquake and/or if a pipe is broken. These are applicable both to utility-supplied natural gas and to gas from liquefied petroleum gas (LPG). These small devices are installed on the property gas meter (usually between the utility company"s metered installation and the structure piping) and are designed to instantly stop the natural gas supply in order to protect the structure if a gas leak or line break occurs during an earthquake.

Fires or explosions due to gas line breaks can be more damaging than the actual earthquake itself. Gas supply companies recommend that the gas supply be cut off immediately if there is a smell of gas after an earthquake; if nobody is in place to do this, an unattended earthquake valve will instantly cut off the gas.

An excess flow valve is a spring loaded check valve which will close only when the flow of liquid or vapor through the valve generates sufficient flow or force to overcome the power of the spring holding it open. Each valve has been fabricated with a closing rate in gallons per minute and CFH/air. These valves come in a variety of different sizes and flow rates depending on their intended use. It is critical to understand what the intended service of the valve will be prior to installation.

Clients can avail from us, a wide range of LPG Solenoid Valve at leading industry prices. Manufactured using optimum quality raw material, procured from reliable vendors of the industry, these products are widely appreciated for their durability, reliability and efficient performance. Furthermore, we make sure to examine the quality of the entire range before delivering these products to the clients end, in order to serve them in the best possible manner.

We offer Ball Valves For L.P gas installations use. these valves is aproved by American Gas association & American Petroleum institute for gas handling. the valves we offer is C.S forged body Class - 150# , Class 300# & Class 800# in flange , SW & screwd type in sizes 10 MM to 80 MM ie 3/8" to 3". These Valves is Also available in full steel forged bodies.

Over pressure Shut-off valve is installed immediately after the filter & prior to the Regulator. It normally remains open, incase the outlet pressure of the regulator exceeds the permissible limits, the slam shut off valve senses it through the impulse line & immediately shut off the flow to downstream.

When the regulator is repaired, the slam shut off valve is to be opened manually by pulling the knob. Once the flow starts through the slam off valve it will remain open till the outlet pressure of the regulator is within limits.

A quick connect fitting, also called a quick disconnect or quick release coupling, is a coupling used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. When equipped with self-sealing valves, quick connect fittings will, upon disconnection, automatically contain any fluid in the line.

In order to keep pace with the never-ending demands of customers, we are involved in offering a wide range of Metal Solenoid Valve. Specifications Material Metal Colour Black & Grey Application General Other Information A Metal Solenoid Valve is an electro-mechanically operated valve. The valve is controlled by an electric current through a solenoid in the case of a two-port valve the flow is switched on or off; in the case of a three-port valve, the outflow is switched between the two outlet ports.

Fire Ball valves are quarter-turn, straight-through valves that have a round closure element with matching rounded seats that permit uniform sealing stress. Fire safe ball valves feature a back-up metal seat. This is important if the temperature of the system gets high enough to melt or soften the plastic seal. The metal seat acts as a seal when the ball rests across the seal. The valve gets its name from the ball that rotates to open and close the valve. Fire Safe valves are used in situations where tight shut-off is required. They are wide duty valves, able to transfer gases, liquid Fuels.

Our range of flame proof solenoid valves are used in gas flow applications. Being Flame proof also these provides optimum performance with complete safety. Our high pressure valve, functionality and quality and are suitable for different gas groups. These are used in various industries lime oil gas, nuclear power industry, petroleum refineries and other similar industries.

We are amongst prominent manufacturers of a diverse range of RO Shut Off Valve. These valves are easy to mount and dismount. Besides, these valves are abrasion resistant, sturdy in construction and dimensionally accurate. One can avail RO Shut Off Valves at industry leading rates from us.

After years of opposition to quake valves, the Southern California Gas Co. has reversed course and has developed its own and is marketing the device to its residential customers.

Shut-off valves--In the Oct. 12 Real Estate section, “Gas Shut-Off Valve Makers Get a Jolt,” Vanguard Valves should have been included in the list of manufacturers whose devices will not reopen after being tripped. The Vanguard valve is held closed by gravity at tipping angles of less than than 90 degrees. At more than 90 degrees, the valve is held closed by gas pressure.

The utility’s entry into the marketplace has the potential to expand what has been a cottage industry into a multimillion-dollar business, as more than 3 million homes served by the company are being offered a quake valve at about $200 installed.

The Gas Co. valve, like the six other valves certified for use in city of Los Angeles and the state, is designed to help prevent gas fires after a quake of about 5.4 magnitude or greater by automatically shutting off the flow of gas before it enters a structure.

Sold by a Gas Co. affiliate called Energy Pacific, the softball-sized valve is installed in the incoming gas pipe just before the gas meter. The installation can be done by the utility, a licensed plumber or general contractor. The $200 cost can be spread over four or 12 monthly payments.

* Homeowners could have gas leaks and not know it. Gas Co. statistics compiled after the 1994 Northridge quake revealed that about 20% of the homes where their technicians restored gas service had potentially dangerous pipe damage.

Now the Gas Co., after successfully test-marketing its valve in the San Fernando Valley, north Orange County and Riverside last year, is offering the device throughout most of its Southland service area from Santa Barbara to San Clemente and east to the Palm Springs area.

With television ads now being aired and the city of Los Angeles mandating seismic gas shut-off valves on all new homes and all remodels costing more than $10,000, the utility’s entry into the market is expected to shake things up for the smaller valve companies that have had the business to themselves, as well as heighten consumer awareness of the valves.

Although all seven devices are fully certified, only the valves sold by Pacific Seismic Products, Seismic Safety Products and Engdahl Enterprises are designed and built to keep the valve from reopening by itself after shut-off during a quake.

Most of the makers rely on gravity alone to keep their valve closed after it trips, but Pacific Seismic, Seismic Safety and Engdahl use a magnet or spring to avoid reopening.

Under most circumstances the gravity design is adequate, but if the gas meter is somehow tipped at a steep angle by the temblor or falling debris, the valves could reopen.

“It will tilt at up to a 45-degree angle without reopening itself,” he said. “If a meter is somehow pushed to over 45 degrees, chances are the exterior gas pipes will rupture anyway, rendering the shut-off valve useless.”

According to Gas Co. statistics, at least 5% of residential gas main values are frozen open. So if a quake valve is reset manually after automatic shut-off and a gas leak is detected, the homeowner could be in danger with a leak under pressure and no way to shut off the gas supply.

A Gas Co. representative said the company checks and repairs gas main valves when the shut-off valves are installed. (Incidentally, Gas Co. technicians will install any approved valve, not just theirs.)

An investigation into the safety of earthquake gas valves sold in the United States is underway by the Consumer Product Safety Commission. The findings will likely be available later this year.

For now, consumers are advised to contact their local Building and Safety Department for information and a list of earthquake valves approved for installation in their community.

In selecting the proper valve for your needs, the best advice is to ask your plumber or contractor for his or her valve preference or to ask the manufacturers about safety features and price.

Pacific Seismic Products proudly manufactures PSP Valves, which are the industry-leading standard in seismic-actuated valves for residential, commercial and industrial applications.