subsurface safety valve supplier

Designed to provide protection from well-control events, Superior surface-controlled subsurface safety valves are built and tested to the highest API standards. Our field-proven line will allow you to quickly close a well when needed, protecting assets and people. Available in sizes from 2-3/8” to 7”, our retrievable safety valves are designed for setting depths of up to 3,000 feet and pressures of up to 10,000 psi.

Halliburton provides proven, high-performance tubing-retrievable and wireline-retrievable subsurface safety valves (SSSV) designed to reliably shut-in (fail safe) if a catastrophic event occurs, allowing operators to maintain safe operations.

Surface-controlled subsurface safety valves (SCSSVs) are critical components of well completions, preventing uncontrolled flow in the case of catastrophic damage to wellhead equipment. Fail-safe closure must be certain to ensure proper security of the well. However, this is not the only function in which it must be reliable—the valve must remain open to produce the well. Schlumberger surface controlled subsurface safety valves exceed all ISO 10432 and API Spec 14A requirements for pressure integrity, leakage acceptance criteria, and slam closure.

Through decades of innovation and experience, Schlumberger safety valve flapper systems are proven robust and reliable. The multizone dynamic seal technology for hydraulic actuation of subsurface safety valves is a further improvement in reliability performance when compared with traditional seal systems in the industry.

The multizone seal technology is currently available in the GeoGuard high-performance deepwater safety valves, which is validated to API Spec 14A V1 and V1-H.

Baker Hughes’s portfolio of subsurface safety valves deliver reliable performance when it matters the most, providing emergency closure in the event that well control is lost. We offer a full range of valves to suit applications ranging from shallow- to deep-set, and the valves are available in surface- and subsurface-controlled, tubing-retrievable, and wireline-retrievable options. All Baker Hughes valves undergo stringent prototype testing and conform to standards and specifications such as API and ISO, as well as requirements requested for your unique situation.

Maintaining fluid control and well protection is critical in your shallow depth well operations. The SelecT™ subsurface safety valve from Baker Hughes addresses the unique challenges that shallow set safety valves (typically <1,000 ft) endure.

The tubing-retrievable SelecT valve includes an ultra-strong power spring that delivers the high closing forces needed to reliably and consistently close the valve in the presence of paraffin and other produced solids.

The SelecT is engineered to avoid failures due to wireline damage during downhole interventions. The valve’s advanced flapper design prevents damage and ensures that all seal surfaces are protected from wireline contact—even during accidental closure of the valve during wireline operations.

Ensure greater seal integrity with the SelecT valve’s patented advances that include thru-the-flapper self-equalizing system. And the radial punch control fluid communication system eliminates accidental communication associated with linear shifting sleeves.

The tubing-retrievable subsurface safety valve (SSSV) provides well protection against pressure drop and system failure in wireline and thru-tubing operations. This retrievable safety valve is controlled from the surface with a hydraulic control line. The valve connects to the tubing string and remains open if adequate pressure is maintained. If pressure drops below the threshold (as occurs in the beginning stages of losing well control), the valve closes. This creates a barrier in the tubing to prevent fluids from rushing up the tubing.

The Camco* type T-4 Slickline Retrievable Safety Valve operates on the ambient pressure principle. The T-4 valve closes when the tubing pressure at the valve drops below a preset closing pressure threshold. To facilitate deeper operating pressure settings or higher production pressures, a gas charged chamber is used to offset tubing pressure.

The T-4 Safety Valve utilizes a unique ball and seat design as the primary closure mechanism and offers a large flow area to handle high producing rates with minimum production pressure losses through the valve.

Using the proper lock adapter the T-4 safety valve will attach to most manufacturers’ locking mandrel and is installed in the well with standard slickline methods. These devices can be located and locked within a landing nipple in the production tubing string. If the T-4 safety valve is to be used in tubing string without a landing nipple the valve must be attached to a collar lock and tubing pack-off, or a slip-lock.

The Camco* type A-1 Injection Safety Valve is designed to prevent wells from flowing back or blowing out in the event of an emergency. The A-1 will open at preset injection flow rates†, have unlimited setting depth and, are suitable for severely corrosive environments. These valves are available to 10,000-psi [68,950-kPa] working pressure.

The Camco* type A Series Subsurface Velocity Safety Valve is designed to prevent wells from overproducing or blowing out in the event of an emergency. The A-3 is differential pressure-operated and set to close at a predetermined rate of flow. The A-3 can be adjusted to close at different flow rates by changing the spring, using spring spacers, and/or varying the inside diameter of the valve’s replaceable flow tube choke bean†.

The Camco* type B-Series Wireline Retrievable Surface Controlled Subsurface Safety Valve is manufactured in compliance with API 14A and may be monogrammed upon request. Materials of construction are NACE approved and may be specified to any customer requirements. The B-Series SCSSV features a large, straight-through bore for minimum restriction and a concentric piston actuation system for long-term, reliable performance.

We design, test and manufacture downhole safety valves that are tubing run and surface controlled, as well as wireline run. Our range of tubing retrievable surface controlled subsurface safety valves suits 2-3/8” to 7” tubing sizes, in both standard and slim designs. It is a compact design using a concentric piston mechanism and a flapper system. Minimum metal-to-metal body connections are used to eliminate potential leak paths. All our valves include a nickel alloy flapper/flapper seat to ensure long term reliability of the valves in protecting surface facilities from uncontrolled flow from producing wells.

All our safety valves come with an exercise and lock-out facility. With a landing nipple profile in the top sub a wireline retrievable safety valve can be installed within the tubing run valve bore after lock-out allowing the well to continue to produce.

A full range of accessories is available for the downhole safety valves including exercise/lock-out tools, separation sleeves and nipple protection sleeves.

A safety valve is a valve that acts as the protector of your equipment. Safety valves can prevent damage to your pressure vessels and even prevent explosions at your facility when installed in pressure vessels.

A safety valve is a type of valve that automatically actuates when the pressure of the inlet side of the valve increases to a predetermined pressure, to open the valve disc and discharge the fluid. The safety valve system is designed to be a fail-safe so that a wellbore can be isolated in the event of any system failure or damage to the surface production-control facilities.

In most cases, it is mandatory to have a means of closure for all wells capable of natural flow to the surface. The installation of a subsurface safety valve (SSSV) will provide this emergency closure capability. Safety systems may be operated on a fail-safe principle from a control panel located on the surface that was custom-built by PHC.

The SCSSV is controlled by a ¼” stainless steel control line that is attached to the outside of the well tubing string and installed when the production tubing is installed. Depending on the wellhead pressure, it may be necessary to keep as much as 10,000 psi on the control line to keep the valve open. PHC control panels feature the proven Haskel pump line that generates the required hydraulic pressure for optimal valve control.

The Tubing Retrievable Safety Valve is a self-equalizing, flapper type safety valve designed to shut in a well at a point below the surface. The safety valve is a surface controlled, subsurface safety valve (SCSSV) and is normally closed. The valve is held open by hydraulic control pressure and remains open until the control-line pressure is exhausted. The hydraulic control pressure is transmitted from a remote location through a control line to operate the valve.

Searching for tools to control the flow of your piping system? Explore one of the largest featured collections of products and discover a range of wholesale subsurface safety valve on Alibaba.com. When you search for subsurface safety valve and related items, you will be able to find many types of subsurface safety valve varying in size, shape, use, and quality, all at prices in which are highly reasonable!

There are many uses of valves - mainly controlling the flow of fluids and pressure. Some examples include regulating water for irrigation, industrial uses for controlling processes, and residential piping systems. Magnetic valves like those using the solenoid, are often used in a range of industrial processes. Whereas backflow preventers are often used in residential and commercial buildings to ensure the safety and hygiene of the water supplies. Whether you are designing a regulation system for irrigation or merely looking for a new replacement, you will be able to find whatever type of subsurface safety valve that you need. Our products vary from check valves to pressure reducing valves, ball valves, butterfly valves, thermostatic mixing valves, and a lot more.

Subsurface Safety Valve TRSSSV is a kind of tubing retrievable safety valve which is controlled at the surface. It directly connects to the tubing string. There is a hydraulic control line connecting to the safety valve from the ground. While a certain amount of pressure is supplied through this control line to the safety valve, the valve remains open; while the pressure is released, the safety valve will close and the tubing pass is closed at the same time.

PARVEEN model safety valves are installed in the upper wellbore to provide emergency closure of the producing conduits in the event of an emergency. The safety valve system is designed to be fail safe, so that the wellbore is isolated in the event of any system failure or damage to the surface production control facilities. PARVEEN model safety valve is self equalizing, wireline retrievable, suface controlled and flapper type.PARVEEN model Safety Valves are installed in PARVEEN model Landing Nipples.

The surface safety valve (SSV) is designed to be a fail-safe and fail-close gate valve. SSV is mostly used on high pressure wellhead and X-mas tree, H2S wellhead and X-mas tree, offshore wellhead and X-mas tree and etc. as a master valve and/or wing valve.

The TSS series subsurface safety valves are tubing retrievable surface controlled subsurface safety valves. Compared with the TS series, the safety valve features super slim outer diameter design. The control line connects the valve to the surface, and the pressurization from surface on the control line controls the opening and closing of the flapper. This series of products includes self-equalizing and non-equalizing types.

Tubing Retrievable Surface Controlled Subsurface Safety Valves(API 14A SCSSV), W P 10000psi, 9Cr1Mo/13Cr/S13Cr/Inconel The TH series subsurface safety valves are tubing retrievable surface controlled subsurface ... Read More Get Best Price

Subsurface Safety Valves(API 14A SCSSV), W P 10000psi, 9Cr1Mo/13Cr/S13Cr/Inconel The TH series subsurface safety valves are tubing retrievable surface controlled subsurface safety valves used for high pressure ... Read More Get Best Price

Subsurface Safety Valves(API 14A SCSSV), W P 10000psi, 9Cr1Mo/13Cr/S13Cr/Inconel The TH series subsurface safety valves are tubing retrievable surface controlled subsurface safety valves used for high pressure ... Read More Get Best Price

Subsurface Safety Valves(API 14A SCSSV), W P 10000psi, 9Cr1Mo/13Cr/S13Cr/Inconel The TH series subsurface safety valves are tubing retrievable surface controlled subsurface safety valves used for high pressure ... Read More Get Best Price

Subsurface Safety Valves(TSV-2 7/8-5---TSV-7-8.35 SCSSV), Working pressure 5000psi, 9Cr1Mo/13Cr/S13Cr/Inconel The TSV series subsurface safety valves are tubing retrievable surface controlled subsurface safety ... Read More Get Best Price

WP 10000psi-Subsurface Safety Valves(API 14A SCSSV), 9Cr1Mo/13C/S13Cr/Incone The TS series subsurface safety valves are tubing retrievable surface controlled subsurface safety valves. The curved flapper can ... Read More Get Best Price

VCTSY Series Ultra-temperature Subsurface Safety Valves(Patent for Invention), Working Temperature 350 The VCTSY series ultra-temperature subsurface safety valves are tubing retrievable surface controlled ... Read More Get Best Price

Subsurface Safety Valves (API14A SCSSV), Working pressure 5000psi The TSV series subsurface safety valves are tubing retrievable surface controlled subsurface safety valves used for the low pressure environment... Read More Get Best Price

Subsurface Safety Valves(VCTSY Series Ultra-temperature, Patent for Invention), Working Temperature 350 The VCTSY series ultra-temperature subsurface safety valves are tubing retrievable surface controlled ... Read More Get Best Price

Subsurface Safety Valves(API 14A SCSSV), W P 10000psi, 9Cr1Mo/13Cr/S13Cr/Inconel The TH series subsurface safety valves are tubing retrievable surface controlled subsurface safety valves used for high pressure ... Read More Get Best Price

Downhole Safety Valve is an integral part of Well Integrity Mangement System and acts as a failsafe equipment to prevent uncontrolled release of reservoir fluids. Periodic inspection and maintenance of downhole Safety Valve is essential under normal service conditions. Each Downhole Safety Valve should be tested and lubricated at specified regular intervals as recommended by ADNOCs Standard Operating Procedure and as dictated by field experience. Since it is a Critical Safety Equipment, preventive maintenance of Wireline Retrievable type downhole Safety Valve is being carried out annually which involves valve retrieval, leak/function test and redressing if required.

Current practice within ADNOC Onshore is to carry out redressing with third party for all Wireline Retrievable Safety Valve annually or in case they are observed to be passing (not meeting the maximum acceptable gas leak rate of 15 scf/min for gas and 400 cc/min for liquid) or do not pass function test carried out during 6 monthly and yearly Preventive Maintenance Schedule.

The cost incurred for third party redressing is substantial and can be optimized by evaluating the possibility of carrying out redressing in-house with available resources and using Original Equipment Manufacturer redress kit in situations where internal leak is not observed in the valve and valve can be redressed without the need to open tension spring and flow tube which requires extensive redressing setup available with third party.