200 psi safety valve brands

Air compressor tank safety valve. This valve is rated to 200psi and has a maximum CFM discharge rating of 178 cfm. This valve utilizes 1/4" NPT Male threads.

This ASME soft seat safety relief valve, also known as a "pressure relief valve" or "pop off valve" is a standard safety valve for small air compressor systems and related applications. Even though the size is compact, the flow capacities are high. A resilient silicone rubber pad insures valve is bubble tight to within 10% of set pressure. All brass construction with zinc plated music wire spring. Stamped with "UV" and "NB" symbols. Pressure tolerance + - 3% of set pressure. Maximum temperature 250 degrees farenheit.

1/4" MNPT ASME safety valves are manufactured to ASME standards and certified by the national board of boiler and pressure vessel inspectors. Valves are interchangeable with all other ASME valves of same size and pressure. Valve resets after pressure drops by 50%.

Brand new, certified 1/2" NPT Threaded 200 PSI High CFM air compressor / tank pressure safety relief valve. Also known as a "Pop Off" or "Blow Off" valve. This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols. The relief pressure of this valve is set at 200 PSI and is accurate within + or - 3% of the set pressure.

• This valve will relieve 363 SCFM• Valve Inlet Threads: 1/2" Male NPT (measure about 3/4" in diameter)• Total Valve Length: 2-3/4"• Installation Wrench Size: 7/8"• Features a silicone rubber soft seat relief valve to prevent leaks• Max temperature: 250°• Solid Brass Construction• Top quality made in the U.S.A• Manufactured by Conrader

Brand new field adjustable, Non Code 1/4" NPT pressure relief valve kit. This is a high quality relief valve that can easily be adjusted to any pressure between 25 and 200 PSI. This valve kit comes with 4 springs. These springs are easy to change out and give you the ability to easily alternate relief pressure anywhere from 25-50, 50-100, 100-150, and 150-200 PSI! The knurled thumbscrew and jam nut make adjustments easy and repeatable. This valve can be used in a variety of applications and has a max temperature rating of 250°F. This relief valve is made of solid brass and has an inner silicon rubber seal and a zinc plated music wire spring.

The PSV1/4-200 SAFETY VALVE - 1/4", 200 PSI was used on various brands of air compressors manufactured by Wood Industries including both electric and gas powered oil lubricated single stage air compressor, 2 stage air compressors, portable air compressor, direct drive compressors and stationary air compressors as well as many oil free hand carry air compressors.

The PSV1/4-200 SAFETY VALVE - 1/4", 200 PSI may have been used on air compressors privately labeled under any of the following brands from Wood Industries including Iron Horse Air Compressors, Eagle Air Compressors, and MAXair Industrial Air Compressors.