robertshaw safety valve quotation

The Robertshaw® TS Series thermomagnetic safety valve is a control used to cut off the flow of gas to the burner in the event of a pilot outage. The magnet assembly is energized by voltage generated by a thermocouple that is heated by the pilot flame. When this flame is extinguished, the thermocouple voltage decreases until a spring overcomes the magnetic force and closes off both the pilot and main gas.

This control can be used for commercial and residential ovens, infrared heaters, chicken and pig brooders, recreational vehicle gas appliances and many more applications requiring automatic safety valves. The TS valve is multi-poise and can be mounted in any position without affecting its operation.

The Robertshaw® TS Series thermomagnetic safety valve is a control used to cut off the flow of gas to the burner in the event of a pilot outage. The magnet assembly is energized by voltage generated by a thermocouple that is heated by the pilot flame. When this flame is extinguished, the thermocouple voltage decreases until a spring overcomes the magnetic force and closes off both the pilot and main gas.

This control can be used for commercial and residential ovens, infrared heaters, chicken and pig brooders, recreational vehicle gas appliances and many more applications requiring automatic safety valves. The TS valve is multi-poise and can be mounted in any position without affecting its operation.

Robertshaw® has been creating and implementing innovative solutions throughout its history. Robertshaw continues to develop ground-breaking solutions that make products more effective, more efficient, and more attainable.

LIMITED SUPPLY! Vintage Gas Stove Factory Re-Built Robertshaw Grayson TS-7 Safety Valve with Warranty. This safety valve is guaranteed to work like a new. Warranty - One Year.The two common inlet/outlet thread connections are the 1/4" pipe thread and the 7/16 compression. Please be sure you are ordering the correct connection for your stove.

"RE-BUILT" When we use this term, this means we at GrapeVineSally have had the part/s newly RE-BUILT by factory professionals with over 50 years of experience working with vintage thermostats, safety valves and related gas products. It also means that the thermostat or safety valve HAS NOT BEEN USED post re-build and will perform as new. All re-built thermostats and safety valves are original vintage parts.There are NO REFUNDS, RETURNS or EXCHANGES on re-built thermostats or safety valves. A ONE YEAR WARRANTY IS INCLUDED.

We have most styles of Robertshaw Model BJ Thermostats and Safety Valves that are used with the vintage OK&M and Wedgewood stoves IN STOCK NOW and ready to install.

The Robertshaw 700 series 24 volt combination gas valves offer replacement flexibility. With capacities ranging to 720000 BTU, 3-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 volt Uni-Kit models are suitable for either natural or LP gas. The valve is factory set at 3.5 Inch WC natural gas. A regulator cover plate is included to convert to LP gas. Reliability, performance, flexibility and ease of installation and service in one compact control. Models that have a safety magnet have a notched or slotted magnet for applications requiring the use of an ECO energy cut-off switch. The automatic pilot safety valve is separate from the gas cock and provides gas shutoff in case of pilot outage. Valves can be mounted in any position except upside down.

Robertshaw Controls Combination Gas Valve, Series: 700, 1/2 x 3/4 Inch Size, FNPT, 240000 BTU/hr Capacity, 1/2 psi, -40 to 175 deg F, 24 VAC at 50/60 Hz, 0.2 amp, Natural, LP Gas, 1/4 Inch Tube Pilot Gas Connection, 3-1/2 Inch WC Natural Regulator Adjustment