accumulator safety valve for sale

The MHA accumulator safety block of the ASB series combines all necessary functions to secure a hydraulic accumulator (either bladder, membrane or piston-type accumulator).

In case of emergency the operation of the shut off valve separates the accumulator from the hydraulic circuit. Afterwards the accumulator can be drained to the tank by using the manual (or as an option electrical) relief valve. In addition the accumulator is secured by a PED-certified pressure relief valve.

HYDAC safety and shut-off blocks are designed to protect, shut-off, and discharge hydraulic accumulators or user units. The compact design simplifies the hydraulic system connection and offers the following advantages:minimum space compared to individual components

HYDAC safety and shut-off blocks are designed to protect, shut-off, and discharge hydraulic accumulators or user units. The compact design simplifies the hydraulic system connection and offers the following advantages:minimum space compared to individual components

Parker carbon and stainless steel safety blocks include features to make the installation, operation and maintenance of hydraulic accumulators convenient and safe. For example, the safety block can be used to isolate or shut down the accumulator if there"s a leak or for general maintenance. The bleed facility allows the accumulator to be conveniently drained and the integrated hydraulic relief valve minimises over-pressurisation.

We have included a very small selection of part numbers available, for more information, please download the Accumulator Catalogue or contact your local Parker Sales Company.

Hydraulic systems work under pressure. This pressure has to be carefully maintained to ensure the system works efficiently. Heat and other outside factors can influence the pressure inside the system. Accumulators are used to regulate the pressure by increasing or decreasing the amount of fluid available.

But, for any system to be safe, there needs to be a backup, in case the accumulator malfunctions or breaks. That’s what accumulator safety valves are for. Of course, they can also allow pressure release just because the pressure has got too high and the system can still function normally.

Accumulator safety valves fit into the circuit to release pressure when needed. This effectively protects the rest of the system. Without the accumulator safety valves, excess pressure would cause the components to fail, dramatically dropping the pressure, rendering the system useless.

The right accumulator safety valves will save you the cost of replacing all the components in your system simply because the pressure has got too high.

It should be noted that in most countries accumulator safety valves, or pressure relief valves are a legal requirement. SAIP S.R.L. understands the rules and regulations of different marketplaces around the globe. Choosing their products will ensure you comply with local regulations.